Re: [PATCH v8 07/12] gpio: palmas: add in GPIO support for palmas charger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/03/13 14:15, Linus Walleij wrote:
Sorry for slow replies :-(

On Thu, Mar 7, 2013 at 2:17 PM, Ian Lartey <ian@xxxxxxxxxxxxxxx> wrote:

+static int palmas_gpio_read(struct palmas *palmas, unsigned int reg,
+               int gpio, unsigned int *dest)

I don't like "int gpio" here, please use "int offset".

This is not a global GPIO number, it is an offset in the local gpio_chip,
right?

Correct.

+{
+       /* registers for second bank are identical and offset by 0x9 */
+       if (gpio > 7)
+               reg += PALMAS_GPIO_DATA_IN2;
+
+       return palmas_read(palmas, PALMAS_GPIO_BASE, reg, dest);
+}
+
+static int palmas_gpio_write(struct palmas *palmas, unsigned int reg,
+               int gpio, unsigned int data)
+{
+       /* registers for second bank are identical and offset by 0x9 */
+       if (gpio > 7)
+               reg += PALMAS_GPIO_DATA_IN2;
+
+       return palmas_write(palmas, PALMAS_GPIO_BASE, reg, data);
+}
+
+static int palmas_gpio_update_bits(struct palmas *palmas, unsigned int reg,
+               int gpio, unsigned int mask, unsigned int data)
+{
+       /* registers for second bank are identical and offset by 0x9 */
+       if (gpio > 7)
+               reg += PALMAS_GPIO_DATA_IN2;
+
+       return palmas_update_bits(palmas, PALMAS_GPIO_BASE, reg, mask, data);
+}


-       ret = palmas_read(palmas, PALMAS_GPIO_BASE, PALMAS_GPIO_DATA_IN, &val);
+       ret = palmas_gpio_read(palmas, PALMAS_GPIO_DATA_IN, offset, &val);

(Obviously you are passing the offset.)

+               ret = palmas_gpio_write(palmas, PALMAS_GPIO_SET_DATA_OUT,
+                               offset, BIT(offset % 8));
(..)
+               ret = palmas_gpio_write(palmas, PALMAS_GPIO_CLEAR_DATA_OUT,
+                               offset, BIT(offset % 8));
(...)
+       ret = palmas_gpio_update_bits(palmas, PALMAS_GPIO_DATA_DIR,
+                       offset, 1 << (offset % 8), 1 << (offset % 8));

Why aren't you using the BIT() macro here too?

Further: if these functions are always used like this, with offset
and some BIT() or (1 << (offset % 8)) why don't you move that
latter part into the static helper and just pass offset into the
helper?


Good points  - I missed the other bit shifts.


Yours,
Linus Walleij


Thanks

Ian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/


--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux