[PATCH 3/3] leds-lp5523: use the i2c device id rather than fixed name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 LP5523 driver supports both LP5523 and LP55231.
 The i2c device id is one of the two - lp5523 or lp55231.
 So it's better to use matching i2c device id while enumerating the device
 and naming LED channels.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@xxxxxx>
---
 drivers/leds/leds-lp5523.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index e69e72a..3d60428 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -833,7 +833,8 @@ static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
 }
 
 static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
-			   int chan, struct lp5523_platform_data *pdata)
+			   int chan, struct lp5523_platform_data *pdata,
+			   const char *chip_name)
 {
 	char name[32];
 	int res;
@@ -856,7 +857,7 @@ static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
 			led->cdev.name = pdata->led_config[chan].name;
 		} else {
 			snprintf(name, sizeof(name), "%s:channel%d",
-				pdata->label ?: "lp5523", chan);
+				pdata->label ? : chip_name, chan);
 			led->cdev.name = name;
 		}
 
@@ -927,7 +928,7 @@ static int __devinit lp5523_probe(struct i2c_client *client,
 	if (ret)
 		goto fail1;
 
-	dev_info(&client->dev, "LP5523 Programmable led chip found\n");
+	dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
 
 	/* Initialize engines */
 	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
@@ -955,7 +956,8 @@ static int __devinit lp5523_probe(struct i2c_client *client,
 		INIT_WORK(&chip->leds[led].brightness_work,
 			lp5523_led_brightness_work);
 
-		ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
+		ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata,
+				id->name);
 		if (ret) {
 			dev_err(&client->dev, "error initializing leds\n");
 			goto fail2;
-- 
1.7.9.5


Best Regards,
Milo


--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux