Re: [RFC PATCH 2/8] regulator: Add Dialog DA906x voltage regulators support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 29, 2012 at 03:50:00PM +0100, Krystian Garbaciak wrote:

> Because, for some regulators, this is required: val += fvol->offset,
> I was only able to reduce it to the following form.

What on earth makes you say this?  The above is obviously linear.

Besides, you're missing several points here.  One is that you should be
using the framework features, another is that you should be implementing
_sel.

> > > +	bits = da906x_reg_read(hw, DA906X_REG_STATUS_D);
> > > +	if (bits < 0)
> > > +		return IRQ_HANDLED;

> > If you fail to detect an interrupt you report that you handled one...?

> For me there is no sensible return value for this case.

IRQ_NONE.
--
To unsubscribe from this list: send the line "unsubscribe linux-leds" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux