Re: [PATCH v2 3/3] tun: Set num_buffers for virtio 1.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 15, 2025 at 1:07 PM Akihiko Odaki <akihiko.odaki@xxxxxxxxxx> wrote:
>
> On 2025/01/13 12:04, Jason Wang wrote:
> > On Fri, Jan 10, 2025 at 7:12 PM Akihiko Odaki <akihiko.odaki@xxxxxxxxxx> wrote:
> >>
> >> On 2025/01/10 19:23, Michael S. Tsirkin wrote:
> >>> On Fri, Jan 10, 2025 at 11:27:13AM +0800, Jason Wang wrote:
> >>>> On Thu, Jan 9, 2025 at 2:59 PM Akihiko Odaki <akihiko.odaki@xxxxxxxxxx> wrote:
> >>>>>
> >>>>> The specification says the device MUST set num_buffers to 1 if
> >>>>> VIRTIO_NET_F_MRG_RXBUF has not been negotiated.
> >>>>
> >>>> Have we agreed on how to fix the spec or not?
> >>>>
> >>>> As I replied in the spec patch, if we just remove this "MUST", it
> >>>> looks like we are all fine?
> >>>>
> >>>> Thanks
> >>>
> >>> We should replace MUST with SHOULD but it is not all fine,
> >>> ignoring SHOULD is a quality of implementation issue.
> >>>
> >
> > So is this something that the driver should notice?
> >
> >>
> >> Should we really replace it? It would mean that a driver conformant with
> >> the current specification may not be compatible with a device conformant
> >> with the future specification.
> >
> > I don't get this. We are talking about devices and we want to relax so
> > it should compatibile.
>
>
> The problem is:
> 1) On the device side, the num_buffers can be left uninitialized due to bugs
> 2) On the driver side, the specification allows assuming the num_buffers
> is set to one.
>
> Relaxing the device requirement will replace "due to bugs" with
> "according to the specification" in 1). It still contradicts with 2) so
> does not fix compatibility.

Just to clarify I meant we can simply remove the following:

"""
The device MUST use only a single descriptor if VIRTIO_NET_F_MRG_RXBUF
was not negotiated. Note: This means that num_buffers will always be 1
if VIRTIO_NET_F_MRG_RXBUF is not negotiated.
"""

And

"""
If VIRTIO_NET_F_MRG_RXBUF has not been negotiated, the device MUST set
num_buffers to 1.
"""

This seems easier as it reflects the fact where some devices don't set
it. And it eases the transitional device as it doesn't need to have
any special care.

Then we don't need any driver normative so I don't see any conflict.

Michael suggests we use "SHOULD", but if this is something that the
driver needs to be aware of I don't know how "SHOULD" can help a lot
or not.

>
> Instead, we should make the driver requirement stricter to change 2).
> That is what "[PATCH v3] virtio-net: Ignore num_buffers when unused" does:
> https://lore.kernel.org/r/20250110-reserved-v3-1-2ade0a5d2090@xxxxxxxxxx
>
> >
> >>
> >> We are going to fix all implementations known to buggy (QEMU and Linux)
> >> anyway so I think it's just fine to leave that part of specification as is.
> >
> > I don't think we can fix it all.
>
> It essentially only requires storing 16 bits. There are details we need
> to work out, but it should be possible to fix.

I meant it's not realistic to fix all the hypervisors. Note that
modern devices have been implemented for about a decade so we may have
too many versions of various hypervisors. (E.g DPDK seems to stick
with the same behaviour of the current kernel).

>
> Regards,
> Akihiko Odaki
>

Thanks






[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux