Use nft by default if it's supported, as nft is the replacement for iptables,
which is used by default in some releases. Additionally, iptables is dropped
in some releases.
Signed-off-by: Hangbin Liu <liuhangbin@xxxxxxxxx>
---
CC nft developers to see if there are any easier configurations,
as I'm not very familiar with nft commands.
---
tools/testing/selftests/wireguard/netns.sh | 63 ++++++++++++++++++----
1 file changed, 53 insertions(+), 10 deletions(-)
diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh
index 405ff262ca93..4e29c1a7003c 100755
--- a/tools/testing/selftests/wireguard/netns.sh
+++ b/tools/testing/selftests/wireguard/netns.sh
@@ -44,6 +44,7 @@ sleep() { read -t "$1" -N 1 || true; }
waitiperf() { pretty "${1//*-}" "wait for iperf:${3:-5201} pid $2"; while [[ $(ss -N "$1" -tlpH "sport = ${3:-5201}") != *\"iperf3\",pid=$2,fd=* ]]; do sleep 0.1; done; }
waitncatudp() { pretty "${1//*-}" "wait for udp:1111 pid $2"; while [[ $(ss -N "$1" -ulpH 'sport = 1111') != *\"ncat\",pid=$2,fd=* ]]; do sleep 0.1; done; }
waitiface() { pretty "${1//*-}" "wait for $2 to come up"; ip netns exec "$1" bash -c "while [[ \$(< \"/sys/class/net/$2/operstate\") != up ]]; do read -t .1 -N 0 || true; done;"; }
+use_nft() { nft --version &> /dev/null; }
cleanup() {
set +e
@@ -196,13 +197,23 @@ ip1 link set wg0 mtu 1300
ip2 link set wg0 mtu 1300
n1 wg set wg0 peer "$pub2" endpoint 127.0.0.1:2
n2 wg set wg0 peer "$pub1" endpoint 127.0.0.1:1
-n0 iptables -A INPUT -m length --length 1360 -j DROP
+if use_nft; then
+ n0 nft add table inet filter
+ n0 nft add chain inet filter INPUT { type filter hook input priority filter \; policy accept \; }
+ n0 nft add rule inet filter INPUT meta length 1360 counter drop
+else
+ n0 iptables -A INPUT -m length --length 1360 -j DROP
+fi
n1 ip route add 192.168.241.2/32 dev wg0 mtu 1299
n2 ip route add 192.168.241.1/32 dev wg0 mtu 1299
n2 ping -c 1 -W 1 -s 1269 192.168.241.1
n2 ip route delete 192.168.241.1/32 dev wg0 mtu 1299
n1 ip route delete 192.168.241.2/32 dev wg0 mtu 1299
-n0 iptables -F INPUT
+if use_nft; then
+ n0 nft delete table inet filter
+else
+ n0 iptables -F INPUT
+fi
ip1 link set wg0 mtu $orig_mtu
ip2 link set wg0 mtu $orig_mtu
@@ -334,7 +345,13 @@ waitiface $netns2 veths
n0 bash -c 'printf 1 > /proc/sys/net/ipv4/ip_forward'
n0 bash -c 'printf 2 > /proc/sys/net/netfilter/nf_conntrack_udp_timeout'
n0 bash -c 'printf 2 > /proc/sys/net/netfilter/nf_conntrack_udp_timeout_stream'
-n0 iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -d 10.0.0.0/24 -j SNAT --to 10.0.0.1
+if use_nft; then
+ n0 nft add table inet nat
+ n0 nft add chain inet nat POSTROUTING { type nat hook postrouting priority srcnat\; policy accept \; }
+ n0 nft add rule inet nat POSTROUTING ip saddr 192.168.1.0/24 ip daddr 10.0.0.0/24 counter snat to 10.0.0.1
+else
+ n0 iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -d 10.0.0.0/24 -j SNAT --to 10.0.0.1
+fi
n1 wg set wg0 peer "$pub2" endpoint 10.0.0.100:2 persistent-keepalive 1
n1 ping -W 1 -c 1 192.168.241.2
@@ -348,10 +365,20 @@ n1 wg set wg0 peer "$pub2" persistent-keepalive 0
# Test that sk_bound_dev_if works
n1 ping -I wg0 -c 1 -W 1 192.168.241.2
# What about when the mark changes and the packet must be rerouted?
-n1 iptables -t mangle -I OUTPUT -j MARK --set-xmark 1
+if use_nft; then
+ n1 nft add table inet mangle
+ n1 nft add chain inet mangle OUTPUT { type route hook output priority mangle\; policy accept \; }
+ n1 nft add rule inet mangle OUTPUT counter meta mark set 0x1
+else
+ n1 iptables -t mangle -I OUTPUT -j MARK --set-xmark 1
+fi
n1 ping -c 1 -W 1 192.168.241.2 # First the boring case
n1 ping -I wg0 -c 1 -W 1 192.168.241.2 # Then the sk_bound_dev_if case
-n1 iptables -t mangle -D OUTPUT -j MARK --set-xmark 1
+if use_nft; then
+ n1 nft delete table inet mangle
+else
+ n1 iptables -t mangle -D OUTPUT -j MARK --set-xmark 1
+fi
# Test that onion routing works, even when it loops
n1 wg set wg0 peer "$pub3" allowed-ips 192.168.242.2/32 endpoint 192.168.241.2:5
@@ -385,16 +412,32 @@ n1 ping -W 1 -c 100 -f 192.168.99.7
n1 ping -W 1 -c 100 -f abab::1111
# Have ns2 NAT into wg0 packets from ns0, but return an icmp error along the right route.
-n2 iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -d 192.168.241.0/24 -j SNAT --to 192.168.241.2
-n0 iptables -t filter -A INPUT \! -s 10.0.0.0/24 -i vethrs -j DROP # Manual rpfilter just to be explicit.
+if use_nft; then
+ n2 nft add table inet nat
+ n2 nft add chain inet nat POSTROUTING { type nat hook postrouting priority srcnat\; policy accept \; }
+ n2 nft add rule inet nat POSTROUTING ip saddr 10.0.0.0/24 ip daddr 192.168.241.0/24 counter snat to 192.168.241.2
+
+ n0 nft add table inet filter
+ n0 nft add chain inet filter INPUT { type filter hook input priority filter \; policy accept \; }
+ n0 nft add rule inet filter INPUT iifname "vethrs" ip saddr != 10.0.0.0/24 counter drop
+else
+ n2 iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -d 192.168.241.0/24 -j SNAT --to 192.168.241.2
+ n0 iptables -t filter -A INPUT \! -s 10.0.0.0/24 -i vethrs -j DROP # Manual rpfilter just to be explicit.
+fi
n2 bash -c 'printf 1 > /proc/sys/net/ipv4/ip_forward'
ip0 -4 route add 192.168.241.1 via 10.0.0.100
n2 wg set wg0 peer "$pub1" remove
[[ $(! n0 ping -W 1 -c 1 192.168.241.1 || false) == *"From 10.0.0.100 icmp_seq=1 Destination Host Unreachable"* ]]
-n0 iptables -t nat -F
-n0 iptables -t filter -F
-n2 iptables -t nat -F
+if use_nft; then
+ n0 nft delete table inet nat
+ n0 nft delete table inet filter
+ n2 nft delete table inet nat
+else
+ n0 iptables -t nat -F
+ n0 iptables -t filter -F
+ n2 iptables -t nat -F
+fi
ip0 link del vethrc
ip0 link del vethrs
ip1 link del wg0
--
2.46.0
