We're going to expand this test, and macsec offload is only lightly
related to rtnetlink.
Signed-off-by: Sabrina Dubroca <sd@xxxxxxxxxxxxxxx>
---
.../selftests/drivers/net/netdevsim/Makefile | 1 +
.../selftests/drivers/net/netdevsim/config | 1 +
.../drivers/net/netdevsim/macsec-offload.sh | 63 +++++++++++++++++
tools/testing/selftests/net/rtnetlink.sh | 68 -------------------
4 files changed, 65 insertions(+), 68 deletions(-)
create mode 100755 tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh
diff --git a/tools/testing/selftests/drivers/net/netdevsim/Makefile b/tools/testing/selftests/drivers/net/netdevsim/Makefile
index df167c637af9..07b7c46d3311 100644
--- a/tools/testing/selftests/drivers/net/netdevsim/Makefile
+++ b/tools/testing/selftests/drivers/net/netdevsim/Makefile
@@ -11,6 +11,7 @@ TEST_PROGS = devlink.sh \
fib.sh \
fib_notifications.sh \
hw_stats_l3.sh \
+ macsec-offload.sh \
nexthop.sh \
peer.sh \
psample.sh \
diff --git a/tools/testing/selftests/drivers/net/netdevsim/config b/tools/testing/selftests/drivers/net/netdevsim/config
index adf45a3a78b4..5117c78ddf0a 100644
--- a/tools/testing/selftests/drivers/net/netdevsim/config
+++ b/tools/testing/selftests/drivers/net/netdevsim/config
@@ -1,6 +1,7 @@
CONFIG_DUMMY=y
CONFIG_GENEVE=m
CONFIG_IPV6=y
+CONFIG_MACSEC=m
CONFIG_NETDEVSIM=m
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_MULTIQ=y
diff --git a/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh b/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh
new file mode 100755
index 000000000000..7babcfd76b22
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netdevsim/macsec-offload.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+source ethtool-common.sh
+
+NSIM_NETDEV=$(make_netdev)
+MACSEC_NETDEV=macsec_nsim
+
+set -o pipefail
+
+if ! ethtool -k $NSIM_NETDEV | grep -q 'macsec-hw-offload: on'; then
+ echo "SKIP: netdevsim doesn't support MACsec offload"
+ exit 4
+fi
+
+if ! ip link add link $NSIM_NETDEV $MACSEC_NETDEV type macsec offload mac 2>/dev/null; then
+ echo "SKIP: couldn't create macsec device"
+ exit 4
+fi
+ip link del $MACSEC_NETDEV
+
+#
+# test macsec offload API
+#
+
+ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}" type macsec port 4 offload mac
+check $?
+
+ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}2" type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac
+check $?
+
+ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}3" type macsec sci abbacdde01020304 offload mac
+check $?
+
+ip link add link $NSIM_NETDEV "${MACSEC_NETDEV}4" type macsec port 8 offload mac 2> /dev/null
+check $? '' '' 1
+
+ip macsec add "${MACSEC_NETDEV}" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
+check $?
+
+ip macsec add "${MACSEC_NETDEV}" rx port 1234 address "1c:ed:de:ad:be:ef"
+check $?
+
+ip macsec add "${MACSEC_NETDEV}" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \
+ key 00 0123456789abcdef0123456789abcdef
+check $?
+
+ip macsec add "${MACSEC_NETDEV}" rx port 1235 address "1c:ed:de:ad:be:ef" 2> /dev/null
+check $? '' '' 1
+
+for dev in ${MACSEC_NETDEV}{,2,3} ; do
+ ip link del $dev
+ check $?
+done
+
+
+if [ $num_errors -eq 0 ]; then
+ echo "PASSED all $((num_passes)) checks"
+ exit 0
+else
+ echo "FAILED $num_errors/$((num_errors+num_passes)) checks"
+ exit 1
+fi
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
index 87dce3efe31e..d28b7e0ca205 100755
--- a/tools/testing/selftests/net/rtnetlink.sh
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -21,7 +21,6 @@ ALL_TESTS="
kci_test_vrf
kci_test_encap
kci_test_macsec
- kci_test_macsec_offload
kci_test_ipsec
kci_test_ipsec_offload
kci_test_fdb_get
@@ -559,73 +558,6 @@ kci_test_macsec()
end_test "PASS: macsec"
}
-kci_test_macsec_offload()
-{
- sysfsd=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/
- sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/
- probed=false
- local ret=0
- run_cmd_grep "^Usage: ip macsec" ip macsec help
- if [ $? -ne 0 ]; then
- end_test "SKIP: macsec: iproute2 too old"
- return $ksft_skip
- fi
-
- if ! mount | grep -q debugfs; then
- mount -t debugfs none /sys/kernel/debug/ &> /dev/null
- fi
-
- # setup netdevsim since dummydev doesn't have offload support
- if [ ! -w /sys/bus/netdevsim/new_device ] ; then
- run_cmd modprobe -q netdevsim
-
- if [ $ret -ne 0 ]; then
- end_test "SKIP: macsec_offload can't load netdevsim"
- return $ksft_skip
- fi
- probed=true
- fi
-
- echo "0" > /sys/bus/netdevsim/new_device
- while [ ! -d $sysfsnet ] ; do :; done
- udevadm settle
- dev=`ls $sysfsnet`
-
- ip link set $dev up
- if [ ! -d $sysfsd ] ; then
- end_test "FAIL: macsec_offload can't create device $dev"
- return 1
- fi
- run_cmd_grep 'macsec-hw-offload: on' ethtool -k $dev
- if [ $? -eq 1 ] ; then
- end_test "FAIL: macsec_offload netdevsim doesn't support MACsec offload"
- return 1
- fi
- run_cmd ip link add link $dev kci_macsec1 type macsec port 4 offload mac
- run_cmd ip link add link $dev kci_macsec2 type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac
- run_cmd ip link add link $dev kci_macsec3 type macsec sci abbacdde01020304 offload mac
- run_cmd_fail ip link add link $dev kci_macsec4 type macsec port 8 offload mac
-
- msname=kci_macsec1
- run_cmd ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
- run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
- run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \
- key 00 0123456789abcdef0123456789abcdef
- run_cmd_fail ip macsec add "$msname" rx port 1235 address "1c:ed:de:ad:be:ef"
- # clean up any leftovers
- for msdev in kci_macsec{1,2,3,4} ; do
- ip link del $msdev 2> /dev/null
- done
- echo 0 > /sys/bus/netdevsim/del_device
- $probed && rmmod netdevsim
-
- if [ $ret -ne 0 ]; then
- end_test "FAIL: macsec_offload"
- return 1
- fi
- end_test "PASS: macsec_offload"
-}
-
#-------------------------------------------------------------------
# Example commands
# ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \
--
2.47.0
