Re: [PATCH net-next v6 00/12] selftests: ncdevmem: Add ncdevmem to ksft

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/31, Mina Almasry wrote:
> On Wed, Oct 30, 2024 at 8:37 AM Stanislav Fomichev <stfomichev@xxxxxxxxx> wrote:
> >
> > On 10/30, Mina Almasry wrote:
> > > On Wed, Oct 30, 2024 at 8:13 AM Stanislav Fomichev <stfomichev@xxxxxxxxx> wrote:
> > > >
> > > > On 10/30, Mina Almasry wrote:
> > > > > On Wed, Oct 30, 2024 at 7:27 AM Stanislav Fomichev <sdf@xxxxxxxxxxx> wrote:
> > > > > >
> > > > > > The goal of the series is to simplify and make it possible to use
> > > > > > ncdevmem in an automated way from the ksft python wrapper.
> > > > > >
> > > > > > ncdevmem is slowly mutated into a state where it uses stdout
> > > > > > to print the payload and the python wrapper is added to
> > > > > > make sure the arrived payload matches the expected one.
> > > > > >
> > > > > > v6:
> > > > > > - fix compilation issue in 'Unify error handling' patch (Jakub)
> > > > > >
> > > > >
> > > > > Since I saw a compilation failures on a couple of iterations I
> > > > > cherry-picked this locally and tested compilation. I'm seeing this:
> > > >
> > > > Are you cherry picking the whole series or just this patch? It looks
> > > > too broken.
> > > >
> > > > > sudo CFLAGS="-static" make -C ./tools/testing/selftests/drivers/net/hw
> > > > > TARGETS=ncdevmem 2>&1
> > > > > make: Entering directory
> > > > > '/usr/local/google/home/almasrymina/cos-kernel/tools/testing/selftests/drivers/net/hw'
> > > > >   CC       ncdevmem
> > > > > In file included from ncdevmem.c:63:
> > > > > /usr/local/google/home/almasrymina/cos-kernel/tools/testing/selftests/../../../tools/net/ynl/generated/ethtool-user.h:23:43:
> > > > > warning: ‘enum ethtool_header_flags’ declared inside parameter list
> > > > > will not be visible outside of this definition or declaration
> > > > >    23 | const char *ethtool_header_flags_str(enum ethtool_header_flags value);
> > > > >       |                                           ^~~~~~~~~~~~~~~~~~~~
> > > > > /usr/local/google/home/almasrymina/cos-kernel/tools/testing/selftests/../../../tools/net/ynl/generated/ethtool-user.h:25:41:
> > > > > warning: ‘enum ethtool_module_fw_flash_status’ declared inside
> > > > > parameter list will not be visible outside of this definition or
> > > > > declaration
> > > > >    25 | ethtool_module_fw_flash_status_str(enum
> > > > > ethtool_module_fw_flash_status value);
> > > > >       |                                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > /usr/local/google/home/almasrymina/cos-kernel/tools/testing/selftests/../../../tools/net/ynl/generated/ethtool-user.h:6766:45:
> > > > > error: field ‘status’ has incomplete type
> > > > >  6766 |         enum ethtool_module_fw_flash_status status;
> > > > >       |                                             ^~~~~~
> > > >
> > > > This has been fixed via '#include <linux/ethtool_netlink.h>'
> > > >
> > > > > ncdevmem.c: In function ‘do_server’:
> > > > > ncdevmem.c:517:37: error: storage size of ‘token’ isn’t known
> > > > >   517 |                 struct dmabuf_token token;
> > > >
> > > > And this, and the rest, don't make sense at all?
> > > >
> > > > I'll double check on my side.
> > >
> > > Oh, whoops, I forgot to headers_install first. This works for me:
> > >
> > > ➜  cos-kernel git:(tcpdevmem-fixes-1) ✗ sudo make headers_install &&
> > > sudo CFLAGS="-static" make -C ./tools/testing/selftests/drivers/net/hw
> > > TARGETS=ncdevmem 2>&1
> > >   INSTALL ./usr/include
> > > make: Entering directory
> > > '/usr/local/google/home/almasrymina/cos-kernel/tools/testing/selftests/drivers/net/hw'
> > > make: Nothing to be done for 'all'.
> > > make: Leaving directory
> > > '/usr/local/google/home/almasrymina/cos-kernel/tools/testing/selftests/drivers/net/hw'
> > > ➜  cos-kernel git:(tcpdevmem-fixes-1) ✗ find . -iname ncdevmem
> > > ./tools/testing/selftests/drivers/net/hw/ncdevmem
> > >
> > > Sorry for the noise :D
> >
> > Whew, thanks and no worries!
> 
> Sorry, 2 issues testing this series:

Thank you for testing!


> 1. ipv4 addresses seem broken, or maybe i'm using them wrong.
> 
> Client command:
> yes $(echo -e \\x01\\x02\\x03\\x04\\x05\\x06) | tr \\n \\0 | head -c
> 1G | nc 192.168.1.4 5224 -p 5224
> 
> Server command and logs:
> mina-1 /home/almasrymina # ./ncdevmem -s 192.168.1.4 -c 192.168.1.5 -l
> -p 5224 -v 7 -f eth1
> here: ynl.c:887:ynl_req_trampoline
> using queues 15..16
> Running: sudo ethtool -K eth1 ntuple off >&2
> Running: sudo ethtool -K eth1 ntuple on >&2
> Running: sudo ethtool -n eth1 | grep 'Filter:' | awk '{print $2}' |
> xargs -n1 ethtool -N eth1 delete >&2
> ethtool: bad command line argument(s)
> For more information run ethtool -h
> here: ynl.c:887:ynl_req_trampoline
> TCP header split: on
> Running: sudo ethtool -X eth1 equal 15 >&2
> Running: sudo ethtool -N eth1 flow-type tcp6 src-ip 192.168.1.5 dst-ip
> 192.168.1.4 src-port 5224 dst-port 5224 queue 15 >&2
> Invalid src-ip value[192.168.1.5]
> ethtool: bad command line argument(s)
> For more information run ethtool -h
> ./ncdevmem: Failed to configure flow steering
> 
> The ethtool command to configure flow steering is not working for me.
> It thinks it's in v6 mode, when the ip address is a v4 address.
> (notice `-s 192.168.1.4 -c 192.168.1.5`). flow-type should be tcp in
> this case.
> 
> Reverting patch 9e2da4faeccf ("Revert "selftests: ncdevmem: Switch to
> AF_INET6"") resolves this issue. Leading to the second issue:

For IPv4, you have to use IPv4-mapped-IPv6, so your invocation needs to be:

./ncdevmem -s ::ffff:192.168.1.4 -c ::ffff:192.168.1.5 ...

Can you try that? I actually never tested that with non-ffff-prefixed
addresses, maybe that needs some error handling or something. Will
double-check on my side.


> 2. Validation is now broken:
> 
> Client command:
> yes $(echo -e \\x01\\x02\\x03\\x04\\x05\\x06) | tr \\n \\0 | head -c
> 1G | nc 192.168.1.4 5224 -p 5224
> 
> Server command and logs: mina-1 /home/almasrymina # ./ncdevmem -s
> 192.168.1.4 -c 192.168.1.5 -l -p 5224 -v 7 -f eth1
> here: ynl.c:887:ynl_req_trampoline
> using queues 15..16
> Running: sudo ethtool -K eth1 ntuple off >&2
> Running: sudo ethtool -K eth1 ntuple on >&2
> Running: sudo ethtool -n eth1 | grep 'Filter:' | awk '{print $2}' |
> xargs -n1 ethtool -N eth1 delete >&2
> ethtool: bad command line argument(s)
> For more information run ethtool -h
> here: ynl.c:887:ynl_req_trampoline
> TCP header split: on
> Running: sudo ethtool -X eth1 equal 15 >&2
> Running: sudo ethtool -N eth1 flow-type tcp4 src-ip 192.168.1.5 dst-ip
> 192.168.1.4 src-port 5224 dst-port 5224 queue 15 >&2
> Added rule with ID 19999
> here: ynl.c:887:ynl_req_trampoline
> got dmabuf id=1
> binding to address 192.168.1.4:5224
> Waiting or connection on 192.168.1.4:5224
> Got connection from 192.168.1.5:5224
> recvmsg ret=8192
> received frag_page=15997, in_page_offset=0, frag_offset=65523712,
> frag_size=4096, token=1, total_received=4096, dmabuf_id=1
> Failed validation: expected=1, actual=0, index=0
> Failed validation: expected=2, actual=0, index=1
> Failed validation: expected=3, actual=0, index=2
> Failed validation: expected=4, actual=0, index=3
> Failed validation: expected=5, actual=0, index=4
> Failed validation: expected=6, actual=0, index=5
> Failed validation: expected=1, actual=0, index=7
> Failed validation: expected=2, actual=0, index=8
> Failed validation: expected=3, actual=0, index=9
> Failed validation: expected=4, actual=0, index=10
> Failed validation: expected=5, actual=0, index=11
> Failed validation: expected=6, actual=0, index=12
> Failed validation: expected=1, actual=0, index=14
> Failed validation: expected=2, actual=0, index=15
> Failed validation: expected=3, actual=0, index=16
> Failed validation: expected=4, actual=0, index=17
> Failed validation: expected=5, actual=0, index=18
> Failed validation: expected=6, actual=0, index=19
> Failed validation: expected=1, actual=0, index=21
> Failed validation: expected=2, actual=0, index=22
> Failed validation: expected=3, actual=0, index=23
> ./ncdevmem: validation failed.
> 
> I haven't debugged issue #2 yet, but both need to be resolved before
> merge. I'm happy to provide more details if you can't repro. My setup:
> 
> mina-1 /home/almasrymina # cat /boot/config-6.12.0-rc4  | grep -i ipv6
> CONFIG_IPV6=y
> mina-1 /home/almasrymina # cat /proc/sys/net/ipv6/bindv6only
> 0

I see you've fixed it out already in a follow up, will pull in the fix!

---
pw-bot: cr




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux