The benchmark used during the CMT, MBM, and MBA tests can be provided by
the user via (-b) parameter, if not provided the default "fill_buf"
benchmark is used. The user is additionally able to override
any of the "fill_buf" default parameters when running the tests with
"-b fill_buf <fill_buf parameters>".
The "fill_buf" parameters are managed as an array of strings. Using an
array of strings is complex because it requires transformations to/from
strings at every producer and consumer. This is made worse for the
individual tests where the default benchmark parameters values may not
be appropriate and additional data wrangling is required. For example,
the CMT test duplicates the entire array of strings in order to replace
one of the parameters.
More issues appear when combining the usage of an array of strings with
the use case of user overriding default parameters by specifying
"-b fill_buf <parameters>". This use case is fragile with opportunities
to trigger a SIGSEGV because of opportunities for NULL pointers to exist
in the array of strings. For example, by running below (thus by specifying
"fill_buf" should be used but all parameters are NULL):
$ sudo resctrl_tests -t mbm -b fill_buf
Replace the "array of strings" parameters used for "fill_buf" with
new struct fill_buf_param that contains the "fill_buf" parameters that
can be used directly without transformations to/from strings. Two
instances of struct fill_buf_param may exist at any point in time:
* If the user provides new parameters to "fill_buf", the
user parameter structure (struct user_params) will point to a
fully initialized and immutable struct fill_buf_param
containing the user provided parameters.
* If "fill_buf" is the benchmark that should be used by a test,
then the test parameter structure (struct resctrl_val_param)
will point to a fully initialized struct fill_buf_param. The
latter may contain (a) the user provided parameters verbatim,
(b) user provided parameters adjusted to be appropriate for
the test, or (c) the default parameters for "fill_buf" that
is appropriate for the test if the user did not provide
"fill_buf" parameters nor an alternate benchmark.
The existing behavior of CMT test is to use test defined value for the
buffer size even if the user provides another value via command line.
This behavior is maintained since the test requires that the buffer size
matches the size of the cache allocated, and the amount of cache
allocated can instead be changed by the user with the "-n" command line
parameter.
Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
---
Changes since V2:
- Use empty initializers. (Ilpo)
- Let memflush be bool instead of int. (Ilpo)
- Make user input checks more robust. (Ilpo)
- Assign values as part of local variable definition. (Ilpo)
Changes since V1:
- Maintain original behavior where user can override "fill_buf"
parameters via command line ... but only those that can actually
be changed. (Ilpo)
- Fix parsing issues associated with original behavior to ensure
any parameter is valid before any attempt to use it.
- Move patch earlier in series to highlight that this fixes existing
issues.
- Make struct fill_buf_param dynamic to support user provided
parameters as well as test specific parameters.
- Rewrite changelog.
---
tools/testing/selftests/resctrl/cmt_test.c | 32 ++----
tools/testing/selftests/resctrl/fill_buf.c | 4 +-
tools/testing/selftests/resctrl/mba_test.c | 13 ++-
tools/testing/selftests/resctrl/mbm_test.c | 22 ++--
tools/testing/selftests/resctrl/resctrl.h | 59 +++++++---
.../testing/selftests/resctrl/resctrl_tests.c | 103 ++++++++++++++----
tools/testing/selftests/resctrl/resctrl_val.c | 41 ++++---
7 files changed, 178 insertions(+), 96 deletions(-)
diff --git a/tools/testing/selftests/resctrl/cmt_test.c b/tools/testing/selftests/resctrl/cmt_test.c
index 0c045080d808..4c3cf2c25a38 100644
--- a/tools/testing/selftests/resctrl/cmt_test.c
+++ b/tools/testing/selftests/resctrl/cmt_test.c
@@ -116,15 +116,13 @@ static void cmt_test_cleanup(void)
static int cmt_run_test(const struct resctrl_test *test, const struct user_params *uparams)
{
- const char * const *cmd = uparams->benchmark_cmd;
- const char *new_cmd[BENCHMARK_ARGS];
+ struct fill_buf_param fill_buf = {};
unsigned long cache_total_size = 0;
int n = uparams->bits ? : 5;
unsigned long long_mask;
- char *span_str = NULL;
int count_of_bits;
size_t span;
- int ret, i;
+ int ret;
ret = get_full_cbm("L3", &long_mask);
if (ret)
@@ -155,32 +153,26 @@ static int cmt_run_test(const struct resctrl_test *test, const struct user_param
span = cache_portion_size(cache_total_size, param.mask, long_mask);
- if (strcmp(cmd[0], "fill_buf") == 0) {
- /* Duplicate the command to be able to replace span in it */
- for (i = 0; uparams->benchmark_cmd[i]; i++)
- new_cmd[i] = uparams->benchmark_cmd[i];
- new_cmd[i] = NULL;
-
- ret = asprintf(&span_str, "%zu", span);
- if (ret < 0)
- return -1;
- new_cmd[1] = span_str;
- cmd = new_cmd;
+ if (uparams->fill_buf) {
+ fill_buf.buf_size = span;
+ fill_buf.memflush = uparams->fill_buf->memflush;
+ param.fill_buf = &fill_buf;
+ } else if (!uparams->benchmark_cmd[0]) {
+ fill_buf.buf_size = span;
+ fill_buf.memflush = true;
+ param.fill_buf = &fill_buf;
}
remove(RESULT_FILE_NAME);
- ret = resctrl_val(test, uparams, cmd, ¶m);
+ ret = resctrl_val(test, uparams, ¶m);
if (ret)
- goto out;
+ return ret;
ret = check_results(¶m, span, n);
if (ret && (get_vendor() == ARCH_INTEL))
ksft_print_msg("Intel CMT may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
-out:
- free(span_str);
-
return ret;
}
diff --git a/tools/testing/selftests/resctrl/fill_buf.c b/tools/testing/selftests/resctrl/fill_buf.c
index e4f1cea317f1..39545f9369e8 100644
--- a/tools/testing/selftests/resctrl/fill_buf.c
+++ b/tools/testing/selftests/resctrl/fill_buf.c
@@ -102,7 +102,7 @@ void fill_cache_read(unsigned char *buf, size_t buf_size, bool once)
*value_sink = ret;
}
-unsigned char *alloc_buffer(size_t buf_size, int memflush)
+unsigned char *alloc_buffer(size_t buf_size, bool memflush)
{
void *buf = NULL;
uint64_t *p64;
@@ -130,7 +130,7 @@ unsigned char *alloc_buffer(size_t buf_size, int memflush)
return buf;
}
-int run_fill_buf(size_t buf_size, int memflush)
+int run_fill_buf(size_t buf_size, bool memflush)
{
unsigned char *buf;
diff --git a/tools/testing/selftests/resctrl/mba_test.c b/tools/testing/selftests/resctrl/mba_test.c
index be0ead73e55d..74d95c460bd0 100644
--- a/tools/testing/selftests/resctrl/mba_test.c
+++ b/tools/testing/selftests/resctrl/mba_test.c
@@ -172,11 +172,22 @@ static int mba_run_test(const struct resctrl_test *test, const struct user_param
.setup = mba_setup,
.measure = mba_measure,
};
+ struct fill_buf_param fill_buf = {};
int ret;
remove(RESULT_FILE_NAME);
- ret = resctrl_val(test, uparams, uparams->benchmark_cmd, ¶m);
+ if (uparams->fill_buf) {
+ fill_buf.buf_size = uparams->fill_buf->buf_size;
+ fill_buf.memflush = uparams->fill_buf->memflush;
+ param.fill_buf = &fill_buf;
+ } else if (!uparams->benchmark_cmd[0]) {
+ fill_buf.buf_size = DEFAULT_SPAN;
+ fill_buf.memflush = true;
+ param.fill_buf = &fill_buf;
+ }
+
+ ret = resctrl_val(test, uparams, ¶m);
if (ret)
return ret;
diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
index f516a2da1163..72261413c868 100644
--- a/tools/testing/selftests/resctrl/mbm_test.c
+++ b/tools/testing/selftests/resctrl/mbm_test.c
@@ -139,26 +139,26 @@ static int mbm_run_test(const struct resctrl_test *test, const struct user_param
.setup = mbm_setup,
.measure = mbm_measure,
};
- char *endptr = NULL;
- size_t span = 0;
+ struct fill_buf_param fill_buf = {};
int ret;
remove(RESULT_FILE_NAME);
- if (uparams->benchmark_cmd[0] && strcmp(uparams->benchmark_cmd[0], "fill_buf") == 0) {
- if (uparams->benchmark_cmd[1]) {
- errno = 0;
- span = strtoul(uparams->benchmark_cmd[1], &endptr, 10);
- if (errno || *endptr != '\0')
- return -errno;
- }
+ if (uparams->fill_buf) {
+ fill_buf.buf_size = uparams->fill_buf->buf_size;
+ fill_buf.memflush = uparams->fill_buf->memflush;
+ param.fill_buf = &fill_buf;
+ } else if (!uparams->benchmark_cmd[0]) {
+ fill_buf.buf_size = DEFAULT_SPAN;
+ fill_buf.memflush = true;
+ param.fill_buf = &fill_buf;
}
- ret = resctrl_val(test, uparams, uparams->benchmark_cmd, ¶m);
+ ret = resctrl_val(test, uparams, ¶m);
if (ret)
return ret;
- ret = check_results(span);
+ ret = check_results(param.fill_buf ? param.fill_buf->buf_size : 0);
if (ret && (get_vendor() == ARCH_INTEL))
ksft_print_msg("Intel MBM may be inaccurate when Sub-NUMA Clustering is enabled. Check BIOS configuration.\n");
diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
index 82801245e4c1..c9336f9c2cae 100644
--- a/tools/testing/selftests/resctrl/resctrl.h
+++ b/tools/testing/selftests/resctrl/resctrl.h
@@ -43,16 +43,36 @@
#define DEFAULT_SPAN (250 * MB)
+/*
+ * fill_buf_param: "fill_buf" benchmark parameters
+ * @buf_size: Size (in bytes) of buffer used in benchmark.
+ * "fill_buf" allocates and initializes buffer of
+ * @buf_size. User can change value via command line.
+ * @memflush: If false the buffer will not be flushed after
+ * allocation and initialization, otherwise the
+ * buffer will be flushed. User can change value via
+ * command line (via integers with 0 interpreted as
+ * false and anything else as true).
+ */
+struct fill_buf_param {
+ size_t buf_size;
+ bool memflush;
+};
+
/*
* user_params: User supplied parameters
* @cpu: CPU number to which the benchmark will be bound to
* @bits: Number of bits used for cache allocation size
* @benchmark_cmd: Benchmark command to run during (some of the) tests
+ * @fill_buf: Pointer to user provided parameters for "fill_buf",
+ * NULL if user did not provide parameters and test
+ * specific defaults should be used.
*/
struct user_params {
int cpu;
int bits;
const char *benchmark_cmd[BENCHMARK_ARGS];
+ const struct fill_buf_param *fill_buf;
};
/*
@@ -87,21 +107,29 @@ struct resctrl_test {
* @init: Callback function to initialize test environment
* @setup: Callback function to setup per test run environment
* @measure: Callback that performs the measurement (a single test)
+ * @fill_buf: Parameters for default "fill_buf" benchmark.
+ * Initialized with user provided parameters, possibly
+ * adapted to be relevant to the test. If user does
+ * not provide parameters for "fill_buf" nor a
+ * replacement benchmark then initialized with defaults
+ * appropriate for test. NULL if user provided
+ * benchmark.
*/
struct resctrl_val_param {
- const char *ctrlgrp;
- const char *mongrp;
- char filename[64];
- unsigned long mask;
- int num_of_runs;
- int (*init)(const struct resctrl_val_param *param,
- int domain_id);
- int (*setup)(const struct resctrl_test *test,
- const struct user_params *uparams,
- struct resctrl_val_param *param);
- int (*measure)(const struct user_params *uparams,
- struct resctrl_val_param *param,
- pid_t bm_pid);
+ const char *ctrlgrp;
+ const char *mongrp;
+ char filename[64];
+ unsigned long mask;
+ int num_of_runs;
+ int (*init)(const struct resctrl_val_param *param,
+ int domain_id);
+ int (*setup)(const struct resctrl_test *test,
+ const struct user_params *uparams,
+ struct resctrl_val_param *param);
+ int (*measure)(const struct user_params *uparams,
+ struct resctrl_val_param *param,
+ pid_t bm_pid);
+ struct fill_buf_param *fill_buf;
};
struct perf_event_read {
@@ -138,10 +166,10 @@ int write_schemata(const char *ctrlgrp, char *schemata, int cpu_no,
int write_bm_pid_to_resctrl(pid_t bm_pid, const char *ctrlgrp, const char *mongrp);
int perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu,
int group_fd, unsigned long flags);
-unsigned char *alloc_buffer(size_t buf_size, int memflush);
+unsigned char *alloc_buffer(size_t buf_size, bool memflush);
void mem_flush(unsigned char *buf, size_t buf_size);
void fill_cache_read(unsigned char *buf, size_t buf_size, bool once);
-int run_fill_buf(size_t buf_size, int memflush);
+int run_fill_buf(size_t buf_size, bool memflush);
int initialize_read_mem_bw_imc(void);
int measure_read_mem_bw(const struct user_params *uparams,
struct resctrl_val_param *param, pid_t bm_pid);
@@ -149,7 +177,6 @@ void initialize_mem_bw_resctrl(const struct resctrl_val_param *param,
int domain_id);
int resctrl_val(const struct resctrl_test *test,
const struct user_params *uparams,
- const char * const *benchmark_cmd,
struct resctrl_val_param *param);
unsigned long create_bit_mask(unsigned int start, unsigned int len);
unsigned int count_contiguous_bits(unsigned long val, unsigned int *start);
diff --git a/tools/testing/selftests/resctrl/resctrl_tests.c b/tools/testing/selftests/resctrl/resctrl_tests.c
index 0f91c475b255..88768f4d4961 100644
--- a/tools/testing/selftests/resctrl/resctrl_tests.c
+++ b/tools/testing/selftests/resctrl/resctrl_tests.c
@@ -148,6 +148,78 @@ static void run_single_test(const struct resctrl_test *test, const struct user_p
test_cleanup(test);
}
+/*
+ * Allocate and initialize a struct fill_buf_param with user provided
+ * (via "-b fill_buf <fill_buf parameters>") parameters.
+ *
+ * Use defaults (that may not be appropriate for all tests) for any
+ * fill_buf parameters omitted by the user.
+ *
+ * Historically it may have been possible for user space to provide
+ * additional parameters, "operation" ("read" vs "write") in
+ * benchmark_cmd[3] and "once" (run "once" or until terminated) in
+ * benchmark_cmd[4]. Changing these parameters have never been
+ * supported with the default of "read" operation and running until
+ * terminated built into the tests. Any unsupported values for
+ * (original) "fill_buf" parameters are treated as failure.
+ *
+ * Return: On failure, forcibly exits the test on any parsing failure,
+ * returns NULL if no parsing needed (user did not actually provide
+ * "-b fill_buf").
+ * On success, returns pointer to newly allocated and fully
+ * initialized struct fill_buf_param that caller must free.
+ */
+static struct fill_buf_param *alloc_fill_buf_param(struct user_params *uparams)
+{
+ struct fill_buf_param *fill_param = NULL;
+ char *endptr = NULL;
+
+ if (!uparams->benchmark_cmd[0] || strcmp(uparams->benchmark_cmd[0], "fill_buf"))
+ return NULL;
+
+ fill_param = malloc(sizeof(*fill_param));
+ if (!fill_param)
+ ksft_exit_skip("Unable to allocate memory for fill_buf parameters.\n");
+
+ if (uparams->benchmark_cmd[1]) {
+ errno = 0;
+ fill_param->buf_size = strtoul(uparams->benchmark_cmd[1], &endptr, 10);
+ if (errno || *endptr != '\0') {
+ free(fill_param);
+ ksft_exit_skip("Unable to parse benchmark buffer size.\n");
+ }
+ } else {
+ fill_param->buf_size = DEFAULT_SPAN;
+ }
+
+ if (uparams->benchmark_cmd[2]) {
+ errno = 0;
+ fill_param->memflush = strtol(uparams->benchmark_cmd[2], &endptr, 10) != 0;
+ if (errno || *endptr != '\0') {
+ free(fill_param);
+ ksft_exit_skip("Unable to parse benchmark memflush parameter.\n");
+ }
+ } else {
+ fill_param->memflush = true;
+ }
+
+ if (uparams->benchmark_cmd[3]) {
+ if (strcmp(uparams->benchmark_cmd[3], "0")) {
+ free(fill_param);
+ ksft_exit_skip("Only read operations supported.\n");
+ }
+ }
+
+ if (uparams->benchmark_cmd[4]) {
+ if (strcmp(uparams->benchmark_cmd[4], "false")) {
+ free(fill_param);
+ ksft_exit_skip("fill_buf is required to run until termination.\n");
+ }
+ }
+
+ return fill_param;
+}
+
static void init_user_params(struct user_params *uparams)
{
memset(uparams, 0, sizeof(*uparams));
@@ -158,11 +230,11 @@ static void init_user_params(struct user_params *uparams)
int main(int argc, char **argv)
{
+ struct fill_buf_param *fill_param = NULL;
int tests = ARRAY_SIZE(resctrl_tests);
bool test_param_seen = false;
struct user_params uparams;
- char *span_str = NULL;
- int ret, c, i;
+ int c, i;
init_user_params(&uparams);
@@ -239,6 +311,10 @@ int main(int argc, char **argv)
}
last_arg:
+ fill_param = alloc_fill_buf_param(&uparams);
+ if (fill_param)
+ uparams.fill_buf = fill_param;
+
ksft_print_header();
/*
@@ -257,32 +333,11 @@ int main(int argc, char **argv)
filter_dmesg();
- if (!uparams.benchmark_cmd[0]) {
- /* If no benchmark is given by "-b" argument, use fill_buf. */
- uparams.benchmark_cmd[0] = "fill_buf";
- ret = asprintf(&span_str, "%u", DEFAULT_SPAN);
- if (ret < 0)
- ksft_exit_fail_msg("Out of memory!\n");
- uparams.benchmark_cmd[1] = span_str;
- uparams.benchmark_cmd[2] = "1";
- /*
- * Third parameter was previously used for "operation"
- * (read/write) of which only (now default) "read"/"0"
- * works.
- * Fourth parameter was previously used to indicate
- * how long "fill_buf" should run for, with "false"
- * ("fill_buf" will keep running until terminated)
- * the only option that works.
- */
- uparams.benchmark_cmd[3] = NULL;
- uparams.benchmark_cmd[4] = NULL;
- }
-
ksft_set_plan(tests);
for (i = 0; i < ARRAY_SIZE(resctrl_tests); i++)
run_single_test(resctrl_tests[i], &uparams);
- free(span_str);
+ free(fill_param);
ksft_finished();
}
diff --git a/tools/testing/selftests/resctrl/resctrl_val.c b/tools/testing/selftests/resctrl/resctrl_val.c
index c4ebf70a46ef..00b3808d3bca 100644
--- a/tools/testing/selftests/resctrl/resctrl_val.c
+++ b/tools/testing/selftests/resctrl/resctrl_val.c
@@ -535,6 +535,11 @@ int measure_read_mem_bw(const struct user_params *uparams,
return ret;
}
+struct benchmark_info {
+ const struct user_params *uparams;
+ struct resctrl_val_param *param;
+};
+
/*
* run_benchmark - Run a specified benchmark or fill_buf (default benchmark)
* in specified signal. Direct benchmark stdio to /dev/null.
@@ -544,12 +549,11 @@ int measure_read_mem_bw(const struct user_params *uparams,
*/
static void run_benchmark(int signum, siginfo_t *info, void *ucontext)
{
- char **benchmark_cmd;
- int ret, memflush;
- size_t span;
+ struct benchmark_info *benchmark_info = info->si_ptr;
+ const struct user_params *uparams = benchmark_info->uparams;
+ struct resctrl_val_param *param = benchmark_info->param;
FILE *fp;
-
- benchmark_cmd = info->si_ptr;
+ int ret;
/*
* Direct stdio of child to /dev/null, so that only parent writes to
@@ -561,16 +565,13 @@ static void run_benchmark(int signum, siginfo_t *info, void *ucontext)
parent_exit(ppid);
}
- if (strcmp(benchmark_cmd[0], "fill_buf") == 0) {
- /* Execute default fill_buf benchmark */
- span = strtoul(benchmark_cmd[1], NULL, 10);
- memflush = atoi(benchmark_cmd[2]);
-
- if (run_fill_buf(span, memflush))
+ if (param->fill_buf) {
+ if (run_fill_buf(param->fill_buf->buf_size,
+ param->fill_buf->memflush))
fprintf(stderr, "Error in running fill buffer\n");
- } else {
+ } else if (uparams->benchmark_cmd[0]) {
/* Execute specified benchmark */
- ret = execvp(benchmark_cmd[0], benchmark_cmd);
+ ret = execvp(uparams->benchmark_cmd[0], (char **)uparams->benchmark_cmd);
if (ret)
ksft_perror("execvp");
}
@@ -585,16 +586,15 @@ static void run_benchmark(int signum, siginfo_t *info, void *ucontext)
* the benchmark
* @test: test information structure
* @uparams: user supplied parameters
- * @benchmark_cmd: benchmark command and its arguments
* @param: parameters passed to resctrl_val()
*
* Return: 0 when the test was run, < 0 on error.
*/
int resctrl_val(const struct resctrl_test *test,
const struct user_params *uparams,
- const char * const *benchmark_cmd,
struct resctrl_val_param *param)
{
+ struct benchmark_info benchmark_info;
struct sigaction sigact;
int ret = 0, pipefd[2];
char pipe_message = 0;
@@ -610,6 +610,9 @@ int resctrl_val(const struct resctrl_test *test,
return ret;
}
+ benchmark_info.uparams = uparams;
+ benchmark_info.param = param;
+
/*
* If benchmark wasn't successfully started by child, then child should
* kill parent, so save parent's pid
@@ -671,13 +674,7 @@ int resctrl_val(const struct resctrl_test *test,
ksft_print_msg("Benchmark PID: %d\n", (int)bm_pid);
- /*
- * The cast removes constness but nothing mutates benchmark_cmd within
- * the context of this process. At the receiving process, it becomes
- * argv, which is mutable, on exec() but that's after fork() so it
- * doesn't matter for the process running the tests.
- */
- value.sival_ptr = (void *)benchmark_cmd;
+ value.sival_ptr = (void *)&benchmark_info;
/* Taskset benchmark to specified cpu */
ret = taskset_benchmark(bm_pid, uparams->cpu, NULL);
--
2.46.2
