Re: [PATCH v2] selftest: remoteproc: Add basic test for start/stop sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Sep 29, 2024 at 10:03:23PM -0500, Bjorn Andersson wrote:
> On Fri, Sep 27, 2024 at 04:51:32PM GMT, Wasim Nazir wrote:
> > This test includes:
> >     1) Start/stop test for each rproc instance sequencially
> >     2) Start/stop test for all rproc instances concurrently
> > 
> 
> This fails to describe the purpose of the patch. Provide a proper commit
> mesasge.
> 
> In particular, I expect an argumentation for your test scheme. Will this
> work across all remoteproc instances? Does it have any dependencies,
> etc...
As we are tesing only the core ops based on the availabe sysfs entries,
it should work accross targets where remoteproc config is enabled & instances
are available. Otherwise I am skipping the tests.
Please correct me if I am missing anything here.

I will try to elaborate purpose of the tests in next patch.
> 
> > Changes in v2:
> > - Update commit message
> > - Addressed start/stop flow
> 
> The changelog goes below the '---' line, adjacent to your diffstat -
> which is missing from your patch. I don't know how you're sending these
> patches, but your system is either configured weirdly or you're not
> following my instructions on go/upstream.
> 
Will do the correction in next patch.
> > 
> > Signed-off-by: Wasim Nazir <quic_wasimn@xxxxxxxxxxx>
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index a77770cd96b8..02ebad5ae790 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -19596,6 +19596,7 @@ F:	Documentation/staging/remoteproc.rst
> >  F:	drivers/remoteproc/
> >  F:	include/linux/remoteproc.h
> >  F:	include/linux/remoteproc/
> > +F:	tools/testing/selftests/remoteproc/
> > 
> >  REMOTE PROCESSOR MESSAGING (RPMSG) SUBSYSTEM
> >  M:	Bjorn Andersson <andersson@xxxxxxxxxx>
> > diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
> > index b38199965f99..0c8a0f427d01 100644
> > --- a/tools/testing/selftests/Makefile
> > +++ b/tools/testing/selftests/Makefile
> > @@ -82,6 +82,7 @@ TARGETS += proc
> >  TARGETS += pstore
> >  TARGETS += ptrace
> >  TARGETS += openat2
> > +TARGETS += remoteproc
> >  TARGETS += resctrl
> >  TARGETS += riscv
> >  TARGETS += rlimits
> > diff --git a/tools/testing/selftests/remoteproc/Makefile b/tools/testing/selftests/remoteproc/Makefile
> > new file mode 100644
> > index 000000000000..a84b3934fd36
> > --- /dev/null
> > +++ b/tools/testing/selftests/remoteproc/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +TEST_PROGS := remoteproc_test.sh
> > +
> > +include ../lib.mk
> > diff --git a/tools/testing/selftests/remoteproc/config b/tools/testing/selftests/remoteproc/config
> > new file mode 100644
> > index 000000000000..a5c237d2f3b4
> > --- /dev/null
> > +++ b/tools/testing/selftests/remoteproc/config
> > @@ -0,0 +1 @@
> > +CONFIG_REMOTEPROC=y
> > diff --git a/tools/testing/selftests/remoteproc/remoteproc_test.sh b/tools/testing/selftests/remoteproc/remoteproc_test.sh
> > new file mode 100644
> > index 000000000000..589368285307
> > --- /dev/null
> > +++ b/tools/testing/selftests/remoteproc/remoteproc_test.sh
> > @@ -0,0 +1,134 @@
> > +#!/bin/sh
> > +# SPDX-License-Identifier: GPL-2.0
> > +#
> > +# Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> > +#
> > +
> > +DIR="$(dirname $(readlink -f "$0"))"
> > +
> > +KTAP_HELPERS="${DIR}/../kselftest/ktap_helpers.sh"
> > +if [ -e "$KTAP_HELPERS" ]; then
> > +    . "$KTAP_HELPERS"
> > +else
> > +    echo -n "1..0 # SKIP $KTAP_HELPERS file not found"
> > +    exit 4
> > +fi
> > +
> > +RPROC_SYS=/sys/class/remoteproc
> > +RPROC_SEQ_SLEEP=5
> > +rproc_instances=
> > +# Declare an array to save initial states of each instance
> > +org_instance_to_state=""
> > +num_tests=0
> > +test_err=0
> > +
> > +check_error() {
> > +	if [ $? -ne 0 ]; then
> > +		test_err=$((test_err+1))
> > +		ktap_print_msg "$@"
> > +	fi
> > +}
> > +
> > +rproc_stop_instances() {
> > +	for instance in ${rproc_instances}; do
> > +		rproc=${RPROC_SYS}/$instance
> > +		rproc_name=$(cat $rproc/name)
> > +		rproc_state=$(cat $rproc/state)
> > +
> > +		echo stop > "$rproc/state"
> > +		check_error "$rproc_name state-stop failed at state $rproc_state"
> > +	done
> > +	sleep ${RPROC_SEQ_SLEEP}
> > +}
> > +
> > +rproc_start_instances() {
> > +	for instance in ${rproc_instances}; do
> > +		rproc=${RPROC_SYS}/$instance
> > +		rproc_name=$(cat $rproc/name)
> > +		rproc_state=$(cat $rproc/state)
> > +
> > +		echo start > "$rproc/state"
> > +		check_error "$rproc_name state-start failed at state $rproc_state"
> > +	done
> > +	sleep ${RPROC_SEQ_SLEEP}
> > +}
> > +
> > +rproc_seq_test_instance_one() {
> > +	instance=$1
> > +	rproc=${RPROC_SYS}/$instance
> > +	rproc_name=$(cat $rproc/name)
> > +	rproc_state=$(cat $rproc/state)
> > +	ktap_print_msg "Testing rproc sequence for $rproc_name"
> > +
> > +	# Reset test_err value
> > +	test_err=0
> > +
> > +	# Begin start/stop sequence
> > +	echo start > "$rproc/state"
> > +	check_error "$rproc_name state-start failed at state $rproc_state"
> > +
> > +	sleep ${RPROC_SEQ_SLEEP}
> > +
> > +	echo stop > "$rproc/state"
> > +	check_error "$rproc_name state-stop failed at state $rproc_state"
> > +
> > +	if [ $test_err -ne 0 ]; then
> > +		ktap_test_fail "$rproc_name"
> > +	else
> > +		ktap_test_pass "$rproc_name"
> > +	fi
> > +}
> > +
> > +rproc_seq_test_instances_concurrently() {
> > +	# Reset test_err value
> > +	test_err=0
> > +
> > +	rproc_start_instances
> > +
> > +	rproc_stop_instances
> > +
> > +	if [ $test_err -ne 0 ]; then
> > +		ktap_test_fail "for any of $rproc_instances"
> > +	else
> > +		ktap_test_pass "for all $rproc_instances"
> > +	fi
> > +}
> > +
> > +ktap_print_header
> > +
> > +if [ ! -d "${RPROC_SYS}" ]; then
> > +	ktap_skip_all "${RPROC_SYS} doesn't exist."
> > +	exit "${KSFT_SKIP}"
> > +fi
> > +
> > +rproc_instances=$(find ${RPROC_SYS}/remoteproc* -maxdepth 1 -exec basename {} \;)
> > +num_tests=$(echo ${rproc_instances} | wc -w)
> > +if [ "${num_tests}" -eq 0 ]; then
> > +	ktap_skip_all "${RPROC_SYS}/remoteproc* doesn't exist."
> > +	exit "${KSFT_SKIP}"
> > +fi
> > +
> > +# Total tests will be:
> > +# 1) Seq tests for each instance sequencially
> > +# 2) Seq tests for all instances concurrently
> > +num_tests=$((num_tests+1))
> > +
> > +ktap_set_plan "${num_tests}"
> > +
> > +# Stop all instances
> > +rproc_stop_instances
> 
> Will this not fail for remoteproc instances that aren't started
> automatically?
This is don't care case where I only intend to stop previous instances
wherever applicable.

After this I am expecting that all instances will be in stop state so
that I can test start/stop sequence. This is inline to the previous review comments.

I will add comments in code for further clarification.

Thanks & Regards,
Wasim
> 
> Regards,
> Bjorn
> 
> > +
> > +# Test 1
> > +ktap_print_msg "Testing rproc start/stop sequence for each instance sequencially"
> > +for instance in ${rproc_instances}; do
> > +	rproc_seq_test_instance_one $instance
> > +done
> > +
> > +# Test 2
> > +ktap_print_msg "Testing rproc start/stop sequence for all instances concurrently"
> > +rproc_seq_test_instances_concurrently
> > +
> > +# Restore all instances
> > +rproc_start_instances
> > +
> > +ktap_finished
> > --
> > 2.46.1
> > 
> 




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux