[PATCH] docs: dev-tools: Add documentation for the device focused kselftests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation for the kselftests focused on testing devices and
point to it from the kselftest documentation. There are multiple tests
in this category so the aim of this page is to make it clear when to run
each test.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
---
This patch depends on patch "kselftest: devices: Add test to detect
missing devices" [1], since this patch documents that test.

[1] https://lore.kernel.org/all/20240928-kselftest-dev-exist-v2-1-fab07de6b80b@xxxxxxxxxxxxx
---
 Documentation/dev-tools/kselftest.rst       |  9 ++++++
 Documentation/dev-tools/testing-devices.rst | 47 +++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index f3766e326d1e..fdb1df86783a 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -31,6 +31,15 @@ kselftest runs as a userspace process.  Tests that can be written/run in
 userspace may wish to use the `Test Harness`_.  Tests that need to be
 run in kernel space may wish to use a `Test Module`_.
 
+Documentation on the tests
+==========================
+
+For documentation on the kselftests themselves, see:
+
+.. toctree::
+
+   testing-devices
+
 Running the selftests (hotplug tests are run in limited mode)
 =============================================================
 
diff --git a/Documentation/dev-tools/testing-devices.rst b/Documentation/dev-tools/testing-devices.rst
new file mode 100644
index 000000000000..ab26adb99051
--- /dev/null
+++ b/Documentation/dev-tools/testing-devices.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (c) 2024 Collabora Ltd
+
+=============================
+Device testing with kselftest
+=============================
+
+
+There are a few different kselftests available for testing devices generically,
+with some overlap in coverage and different requirements. This document aims to
+give an overview of each one.
+
+Note: Paths in this document are relative to the kselftest folder
+(``tools/testing/selftests``).
+
+Device oriented kselftests:
+
+* Devicetree (``dt``)
+
+  * **Coverage**: Probe status for devices described in Devicetree
+  * **Requirements**: None
+
+* Error logs (``devices/error_logs``)
+
+  * **Coverage**: Error (or more critical) log messages presence coming from any
+    device
+  * **Requirements**: None
+
+* Discoverable bus (``devices/probe``)
+
+  * **Coverage**: Presence and probe status of USB or PCI devices that have been
+    described in the reference file
+  * **Requirements**: Manually describe the devices that should be tested in a
+    YAML reference file (see ``devices/probe/boards/google,spherion.yaml`` for
+    an example)
+
+* Exist (``devices/exist``)
+
+  * **Coverage**: Presence of all devices
+  * **Requirements**: Generate the reference (see ``devices/exist/README.rst``
+    for details) on a known-good kernel
+
+Therefore, the suggestion is to enable the error log and devicetree tests on all
+(DT-based) platforms, since they don't have any requirements. Then to greatly
+improve coverage, generate the reference for each platform and enable the exist
+test. The discoverable bus test can be used to verify the probe status of
+specific USB or PCI devices, but is probably not worth it for most cases.

---
base-commit: cea5425829f77e476b03702426f6b3701299b925
change-id: 20241001-kselftest-device-docs-6c8a411109b5

Best regards,
-- 
Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>





[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux