Running this test on a small system produces different failures every
test checking deletions, and some flushes. From different test runs:
TEST: Common host entries configuration tests (L2) [FAIL]
Failed to delete L2 host entry
TEST: Common port group entries configuration tests (IPv4 (S, G)) [FAIL]
IPv4 (S, G) entry with VLAN 10 not deleted when VLAN was not specified
TEST: Common port group entries configuration tests (IPv6 (*, G)) [FAIL]
IPv6 (*, G) entry with VLAN 10 not deleted when VLAN was not specified
TEST: Flush tests [FAIL]
Entry not flushed by specified VLAN ID
TEST: Flush tests [FAIL]
IPv6 host entry not flushed by "nopermanent" state
Add a short sleep after deletion and flush to resolve this.
Create a delay variable just for this test to allow short sleep, the
lib.sh WAIT_TIME of 5 seconds makes the test far longer than necessary.
Tested on several weak systems with 0.1s delay:
- Ivy Bridge Celeron netbook (2014 x86_64)
- Raspberry Pi 3B (2016 aarch64)
- Small KVM VM on Intel 10th gen (2020 x86_64)
All these systems ran 25 test runs in a row with 100% pass OK.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@xxxxxxxxx>
---
v2: Avoid false check failures as seen by Jakub Kicinski.
---
.../selftests/net/forwarding/bridge_mdb.sh | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
index d9d587454d207931a539f59be15cbc63d471888f..49136279973d05d0e6b14237228ab58455554bb0 100755
--- a/tools/testing/selftests/net/forwarding/bridge_mdb.sh
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
@@ -30,6 +30,9 @@ ALL_TESTS="
ctrl_test
"
+# time to wait for delete and flush to complete
+: "${SETTLE_DELAY:=0.1}"
+
NUM_NETIFS=4
source lib.sh
source tc_common.sh
@@ -152,6 +155,7 @@ cfg_test_host_common()
check_fail $? "Managed to replace $name host entry"
bridge mdb del dev br0 port br0 grp $grp $state vid 10
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp $grp vid 10 &> /dev/null
check_fail $? "Failed to delete $name host entry"
@@ -208,6 +212,7 @@ cfg_test_port_common()
check_err $? "Failed to replace $name entry"
bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 $grp_key vid 10 &> /dev/null
check_fail $? "Failed to delete $name entry"
@@ -230,6 +235,7 @@ cfg_test_port_common()
check_err $? "$name entry with VLAN 20 not added when VLAN was not specified"
bridge mdb del dev br0 port $swp1 $grp_key permanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 $grp_key vid 10 &> /dev/null
check_fail $? "$name entry with VLAN 10 not deleted when VLAN was not specified"
bridge mdb get dev br0 $grp_key vid 20 &> /dev/null
@@ -310,6 +316,7 @@ __cfg_test_port_ip_star_g()
bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null
check_err $? "(S, G) entry not created"
bridge mdb del dev br0 port $swp1 grp $grp vid 10
+ sleep "$SETTLE_DELAY"
bridge -d mdb get dev br0 grp $grp vid 10 &> /dev/null
check_fail $? "(*, G) entry not deleted"
bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null
@@ -828,6 +835,7 @@ cfg_test_flush()
bridge mdb add dev br0 port $swp1 grp 239.1.1.8 vid 10 temp
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
num_entries=$(bridge mdb show dev br0 | wc -l)
[[ $num_entries -eq 0 ]]
check_err $? 0 "Not all entries flushed after flush all"
@@ -840,6 +848,7 @@ cfg_test_flush()
bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10
bridge mdb flush dev br0 port $swp1
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1"
check_fail $? "Entry not flushed by specified port"
@@ -849,11 +858,13 @@ cfg_test_flush()
check_err $? "Host entry flushed by wrong port"
bridge mdb flush dev br0 port br0
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0"
check_fail $? "Host entry not flushed by specified port"
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
# Check that when flushing by VLAN ID only entries programmed with the
# specified VLAN ID are flushed and the rest are not.
@@ -864,6 +875,7 @@ cfg_test_flush()
bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 20
bridge mdb flush dev br0 vid 10
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null
check_fail $? "Entry not flushed by specified VLAN ID"
@@ -871,6 +883,7 @@ cfg_test_flush()
check_err $? "Entry flushed by wrong VLAN ID"
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
# Check that all permanent entries are flushed when "permanent" is
# specified and that temporary entries are not.
@@ -879,6 +892,7 @@ cfg_test_flush()
bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10
bridge mdb flush dev br0 permanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1"
check_fail $? "Entry not flushed by \"permanent\" state"
@@ -886,6 +900,7 @@ cfg_test_flush()
check_err $? "Entry flushed by wrong state (\"permanent\")"
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
# Check that all temporary entries are flushed when "nopermanent" is
# specified and that permanent entries are not.
@@ -894,6 +909,7 @@ cfg_test_flush()
bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10
bridge mdb flush dev br0 nopermanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1"
check_err $? "Entry flushed by wrong state (\"nopermanent\")"
@@ -901,6 +917,7 @@ cfg_test_flush()
check_fail $? "Entry not flushed by \"nopermanent\" state"
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
# Check that L2 host entries are not flushed when "nopermanent" is
# specified, but flushed when "permanent" is specified.
@@ -908,16 +925,19 @@ cfg_test_flush()
bridge mdb add dev br0 port br0 grp 01:02:03:04:05:06 permanent vid 10
bridge mdb flush dev br0 nopermanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null
check_err $? "L2 host entry flushed by wrong state (\"nopermanent\")"
bridge mdb flush dev br0 permanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null
check_fail $? "L2 host entry not flushed by \"permanent\" state"
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
# Check that IPv4 host entries are not flushed when "permanent" is
# specified, but flushed when "nopermanent" is specified.
@@ -925,16 +945,19 @@ cfg_test_flush()
bridge mdb add dev br0 port br0 grp 239.1.1.1 temp vid 10
bridge mdb flush dev br0 permanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null
check_err $? "IPv4 host entry flushed by wrong state (\"permanent\")"
bridge mdb flush dev br0 nopermanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null
check_fail $? "IPv4 host entry not flushed by \"nopermanent\" state"
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
# Check that IPv6 host entries are not flushed when "permanent" is
# specified, but flushed when "nopermanent" is specified.
@@ -942,16 +965,19 @@ cfg_test_flush()
bridge mdb add dev br0 port br0 grp ff0e::1 temp vid 10
bridge mdb flush dev br0 permanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null
check_err $? "IPv6 host entry flushed by wrong state (\"permanent\")"
bridge mdb flush dev br0 nopermanent
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null
check_fail $? "IPv6 host entry not flushed by \"nopermanent\" state"
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
# Check that when flushing by routing protocol only entries programmed
# with the specified routing protocol are flushed and the rest are not.
@@ -961,6 +987,7 @@ cfg_test_flush()
bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10
bridge mdb flush dev br0 proto bgp
+ sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1"
check_fail $? "Entry not flushed by specified routing protocol"
@@ -970,6 +997,7 @@ cfg_test_flush()
check_err $? "Host entry flushed by wrong routing protocol"
bridge mdb flush dev br0
+ sleep "$SETTLE_DELAY"
# Test that an error is returned when trying to flush using unsupported
# parameters.
--
2.39.2
