Re: [RFC PATCH 2/3] ipv6: Run a reverse sk_lookup on sendmsg.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 13, 2024 at 11:39 AM Tiago Lam <tiagolam@xxxxxxxxxxxxxx> wrote:
>
> This follows the same rationale provided for the ipv4 counterpart, where
> it now runs a reverse socket lookup when source addresses and/or ports
> are changed, on sendmsg, to check whether egress traffic should be
> allowed to go through or not.
>
> As with ipv4, the ipv6 sendmsg path is also extended here to support the
> IPV6_ORIGDSTADDR ancilliary message to be able to specify a source
> address/port.
>
> Suggested-by: Jakub Sitnicki <jakub@xxxxxxxxxxxxxx>
> Signed-off-by: Tiago Lam <tiagolam@xxxxxxxxxxxxxx>
> ---
>  net/ipv6/datagram.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  net/ipv6/udp.c      |  8 ++++--
>  2 files changed, 82 insertions(+), 2 deletions(-)
>
> diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
> index fff78496803d..4214dda1c320 100644
> --- a/net/ipv6/datagram.c
> +++ b/net/ipv6/datagram.c
> @@ -756,6 +756,27 @@ void ip6_datagram_recv_ctl(struct sock *sk, struct msghdr *msg,
>  }
>  EXPORT_SYMBOL_GPL(ip6_datagram_recv_ctl);
>
> +static inline bool reverse_sk_lookup(struct flowi6 *fl6, struct sock *sk,
> +                                    struct in6_addr *saddr, __be16 sport)
> +{
> +       if (static_branch_unlikely(&bpf_sk_lookup_enabled) &&
> +           (saddr && sport) &&
> +           (ipv6_addr_cmp(&sk->sk_v6_rcv_saddr, saddr) || inet_sk(sk)->inet_sport != sport)) {
> +               struct sock *sk_egress;
> +
> +               bpf_sk_lookup_run_v6(sock_net(sk), IPPROTO_UDP, &fl6->daddr, fl6->fl6_dport,
> +                                    saddr, ntohs(sport), 0, &sk_egress);
> +               if (!IS_ERR_OR_NULL(sk_egress) &&
> +                   atomic64_read(&sk_egress->sk_cookie) == atomic64_read(&sk->sk_cookie))

I do not understand this.

1) sk_cookie is not always initialized. It is done on demand, when/if
__sock_gen_cookie() was called.

2) if sk1 and sk2 share the same sk_cookie, then sk1 == sk2 ???

So why not simply testing sk_egress == sk ?

> +                       return true;
> +
> +               net_info_ratelimited("No reverse socket lookup match for local addr %pI6:%d remote addr %pI6:%d\n",
> +                                    &saddr, ntohs(sport), &fl6->daddr, ntohs(fl6->fl6_dport));
> +       }
> +
> +       return false;
> +}
> +
>  int ip6_datagram_send_ctl(struct net *net, struct sock *sk,
>                           struct msghdr *msg, struct flowi6 *fl6,
>                           struct ipcm6_cookie *ipc6)
> @@ -844,7 +865,62 @@ int ip6_datagram_send_ctl(struct net *net, struct sock *sk,
>
>                         break;
>                     }
> +               case IPV6_ORIGDSTADDR:
> +                       {
> +                       struct sockaddr_in6 *sockaddr_in;
> +                       struct net_device *dev = NULL;
> +
> +                       if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct sockaddr_in6))) {
> +                               err = -EINVAL;
> +                               goto exit_f;
> +                       }
> +
> +                       sockaddr_in = (struct sockaddr_in6 *)CMSG_DATA(cmsg);
> +
> +                       addr_type = __ipv6_addr_type(&sockaddr_in->sin6_addr);
> +
> +                       if (addr_type & IPV6_ADDR_LINKLOCAL)
> +                               return -EINVAL;
> +
> +                       /* If we're egressing with a different source address and/or port, we
> +                        * perform a reverse socket lookup.  The rationale behind this is that we
> +                        * can allow return UDP traffic that has ingressed through sk_lookup to
> +                        * also egress correctly. In case the reverse lookup fails, we
> +                        * continue with the normal path.
> +                        *
> +                        * The lookup is performed if either source address and/or port changed, and
> +                        * neither is "0".
> +                        */
> +                       if (reverse_sk_lookup(fl6, sk, &sockaddr_in->sin6_addr,
> +                                             sockaddr_in->sin6_port)) {
> +                               /* Override the source port and address to use with the one we
> +                                * got in cmsg and bail early.
> +                                */
> +                               fl6->saddr = sockaddr_in->sin6_addr;
> +                               fl6->fl6_sport = sockaddr_in->sin6_port;
> +                               break;
> +                       }
>
> +                       if (addr_type != IPV6_ADDR_ANY) {
> +                               int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
> +
> +                               if (!ipv6_can_nonlocal_bind(net, inet_sk(sk)) &&
> +                                   !ipv6_chk_addr_and_flags(net,
> +                                                            &sockaddr_in->sin6_addr,
> +                                                            dev, !strict, 0,
> +                                                            IFA_F_TENTATIVE) &&
> +                                   !ipv6_chk_acast_addr_src(net, dev,
> +                                                            &sockaddr_in->sin6_addr))
> +                                       err = -EINVAL;
> +                               else
> +                                       fl6->saddr = sockaddr_in->sin6_addr;
> +                       }
> +
> +                       if (err)
> +                               goto exit_f;
> +
> +                       break;
> +                       }
>                 case IPV6_FLOWINFO:
>                         if (cmsg->cmsg_len < CMSG_LEN(4)) {
>                                 err = -EINVAL;
> diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
> index 6602a2e9cdb5..6121cbb71ad3 100644
> --- a/net/ipv6/udp.c
> +++ b/net/ipv6/udp.c
> @@ -1476,6 +1476,12 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
>
>         fl6->flowi6_uid = sk->sk_uid;
>
> +       /* We use fl6's daddr and fl6_sport in the reverse sk_lookup done
> +        * within ip6_datagram_send_ctl() now.
> +        */
> +       fl6->daddr = *daddr;
> +       fl6->fl6_sport = inet->inet_sport;
> +
>         if (msg->msg_controllen) {
>                 opt = &opt_space;
>                 memset(opt, 0, sizeof(struct ipv6_txoptions));
> @@ -1511,10 +1517,8 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
>
>         fl6->flowi6_proto = sk->sk_protocol;
>         fl6->flowi6_mark = ipc6.sockc.mark;
> -       fl6->daddr = *daddr;
>         if (ipv6_addr_any(&fl6->saddr) && !ipv6_addr_any(&np->saddr))
>                 fl6->saddr = np->saddr;
> -       fl6->fl6_sport = inet->inet_sport;
>
>         if (cgroup_bpf_enabled(CGROUP_UDP6_SENDMSG) && !connected) {
>                 err = BPF_CGROUP_RUN_PROG_UDP6_SENDMSG_LOCK(sk,
>
> --
> 2.34.1
>





[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux