This test asserts the relation between blocked signal, delivered signal,
and ucontext. The ucontext is mangled with, by adding a signal mask to
it; on return from the handler, the thread must block the corresponding
signal.
In the test description, I have also described what it exactly means for
a signal to be delivered or blocked, for ease of clarity.
Signed-off-by: Dev Jain <dev.jain@xxxxxxx>
---
tools/testing/selftests/signal/.gitignore | 1 +
tools/testing/selftests/signal/Makefile | 3 +-
.../selftests/signal/mangle_uc_sigmask.c | 194 ++++++++++++++++++
3 files changed, 197 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/signal/mangle_uc_sigmask.c
diff --git a/tools/testing/selftests/signal/.gitignore b/tools/testing/selftests/signal/.gitignore
index 98a7bbc4f325..397fef11c89f 100644
--- a/tools/testing/selftests/signal/.gitignore
+++ b/tools/testing/selftests/signal/.gitignore
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
+mangle_uc_sigmask
sigaltstack
diff --git a/tools/testing/selftests/signal/Makefile b/tools/testing/selftests/signal/Makefile
index dd6be992fd81..735387a53114 100644
--- a/tools/testing/selftests/signal/Makefile
+++ b/tools/testing/selftests/signal/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
CFLAGS = -Wall
-TEST_GEN_PROGS = sigaltstack
+TEST_GEN_PROGS = mangle_uc_sigmask
+TEST_GEN_PROGS += sigaltstack
include ../lib.mk
diff --git a/tools/testing/selftests/signal/mangle_uc_sigmask.c b/tools/testing/selftests/signal/mangle_uc_sigmask.c
new file mode 100644
index 000000000000..9d4644106465
--- /dev/null
+++ b/tools/testing/selftests/signal/mangle_uc_sigmask.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024 ARM Ltd.
+ *
+ * Author: Dev Jain <dev.jain@xxxxxxx>
+ *
+ * Test describing a clear distinction between signal states - delivered and
+ * blocked, and their relation with ucontext.
+ *
+ * A signal is said to be delivered, when the program takes action on the
+ * signal: such action may involve termination of the process, ignoring the
+ * signal, terminating with core dump, stopping the process, or continuing the
+ * process if it was currently stopped. A signal is said to be blocked when the
+ * program refuses to take any of the above actions; note that, this is not the
+ * same as ignoring the signal. At a later time, the program may unblock the
+ * signal and then it will have to take one of the five actions
+ * described above.
+ *
+ * We test the following functionalities of the kernel:
+ *
+ * ucontext_t describes the current state of the thread; this implies that, in
+ * case of registering a handler and catching the corresponding signal, that
+ * state is before what was jumping into the handler.
+ *
+ * The thread's mask of blocked signals can be permanently changed, i.e, not
+ * just during the execution of the handler, by mangling with uc_sigmask
+ * from inside the handler.
+ *
+ * Assume that we block the set of signals, S1, by sigaction(), and say, the
+ * signal for which the handler was installed, is S2. When S2 is sent to the
+ * program, it will be considered "delivered", since we will act on the
+ * signal and jump to the handler. Any instances of S1 or S2 raised, while the
+ * program is executing inside the handler, will be blocked; they will be
+ * delivered immediately upon termination of the handler.
+ *
+ * For standard signals (also see real-time signals in the man page), multiple
+ * blocked instances of the same signal are not queued; such a signal will
+ * be delivered just once.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <ucontext.h>
+
+#include "../kselftest.h"
+
+void handler_verify_ucontext(int signo, siginfo_t *info, void *uc)
+{
+ int ret;
+
+ /* Kernel dumps ucontext with USR2 blocked */
+ ret = sigismember(&(((ucontext_t *)uc)->uc_sigmask), SIGUSR2);
+ ksft_test_result(ret == 1, "USR2 blocked in ucontext\n");
+
+ /*
+ * USR2 is blocked; can be delivered neither here, nor after
+ * exit from handler
+ */
+ if (raise(SIGUSR2))
+ ksft_exit_fail_perror("raise");
+}
+
+void handler_segv(int signo, siginfo_t *info, void *uc)
+{
+ /*
+ * Three cases possible:
+ * 1. Program already terminated due to segmentation fault.
+ * 2. SEGV was blocked even after returning from handler_usr.
+ * 3. SEGV was delivered on returning from handler_usr.
+ * The last option must happen.
+ */
+ ksft_test_result_pass("SEGV delivered\n");
+}
+
+static int cnt;
+
+void handler_usr(int signo, siginfo_t *info, void *uc)
+{
+ int ret;
+
+ /*
+ * Break out of infinite recursion caused by raise(SIGUSR1) invoked
+ * from inside the handler
+ */
+ ++cnt;
+ if (cnt > 1)
+ return;
+
+ ksft_print_msg("In handler_usr\n");
+
+ /* SEGV blocked during handler execution, delivered on return */
+ if (raise(SIGSEGV))
+ ksft_exit_fail_perror("raise");
+
+ ksft_print_msg("SEGV bypassed successfully\n");
+
+ /*
+ * Signal responsible for handler invocation is blocked by default;
+ * delivered on return, leading to recursion
+ */
+ if (raise(SIGUSR1))
+ ksft_exit_fail_perror("raise");
+
+ ksft_test_result(cnt == 1,
+ "USR1 is blocked, cannot invoke handler right now\n");
+
+ /* Raise USR1 again; only one instance must be delivered upon exit */
+ if (raise(SIGUSR1))
+ ksft_exit_fail_perror("raise");
+
+ /* SEGV has been blocked in sa_mask, but ucontext is invariant */
+ ret = sigismember(&(((ucontext_t *)uc)->uc_sigmask), SIGSEGV);
+ ksft_test_result(ret == 0, "USR1 not blocked in ucontext\n");
+
+ /* USR1 has been blocked, but ucontext is invariant */
+ ret = sigismember(&(((ucontext_t *)uc)->uc_sigmask), SIGUSR1);
+ ksft_test_result(ret == 0, "SEGV not blocked in ucontext\n");
+
+ /*
+ * Mangle ucontext; this will be copied back into ¤t->blocked
+ * on return from the handler.
+ */
+ if (sigaddset(&((ucontext_t *)uc)->uc_sigmask, SIGUSR2))
+ ksft_exit_fail_perror("sigaddset");
+}
+
+int main(int argc, char *argv[])
+{
+ struct sigaction act, act2;
+ sigset_t *set, *oldset;
+
+ ksft_print_header();
+ ksft_set_plan(7);
+
+ act.sa_flags = SA_SIGINFO;
+ act.sa_sigaction = &handler_usr;
+
+ /* Add SEGV to blocked mask */
+ if (sigemptyset(&act.sa_mask) || sigaddset(&act.sa_mask, SIGSEGV)
+ || (sigismember(&act.sa_mask, SIGSEGV) != 1))
+ ksft_exit_fail_msg("Cannot add SEGV to blocked mask\n");
+
+ if (sigaction(SIGUSR1, &act, NULL))
+ ksft_exit_fail_perror("Cannot install handler");
+
+ act2.sa_flags = SA_SIGINFO;
+ act2.sa_sigaction = &handler_segv;
+
+ if (sigaction(SIGSEGV, &act2, NULL))
+ ksft_exit_fail_perror("Cannot install handler");
+
+ /* Invoke handler */
+ if (raise(SIGUSR1))
+ ksft_exit_fail_perror("raise");
+
+ /* USR1 must not be queued */
+ ksft_test_result(cnt == 2, "handler invoked only twice\n");
+
+ /* Mangled ucontext implies USR2 is blocked for current thread */
+ if (raise(SIGUSR2))
+ ksft_exit_fail_perror("raise");
+
+ ksft_print_msg("USR2 bypassed successfully\n");
+
+ act.sa_sigaction = &handler_verify_ucontext;
+ if (sigaction(SIGUSR1, &act, NULL))
+ ksft_exit_fail_perror("Cannot install handler");
+
+ if (raise(SIGUSR1))
+ ksft_exit_fail_perror("raise");
+
+ ksft_print_msg("USR2 still blocked on return from handler\n");
+
+ /* Confirm USR2 blockage by sigprocmask() too */
+ set = malloc(sizeof(sigset_t *));
+ if (!set)
+ ksft_exit_fail_perror("malloc");
+
+ oldset = malloc(sizeof(sigset_t *));
+ if (!oldset)
+ ksft_exit_fail_perror("malloc");
+
+ if (sigemptyset(set))
+ ksft_exit_fail_perror("sigemptyset");
+
+ if (sigprocmask(SIG_BLOCK, set, oldset))
+ ksft_exit_fail_perror("sigprocmask");
+
+ ksft_test_result(sigismember(oldset, SIGUSR2) == 1,
+ "USR2 present in ¤t->blocked\n");
+
+ ksft_finished();
+}
--
2.34.1
