Re: [PATCH v2 07/25] KVM: VMX: Set intercept for FRED MSRs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 07, 2024 at 09:26:27AM -0800, Xin Li wrote:
>Add FRED MSRs to the valid passthrough MSR list and set FRED MSRs intercept
>based on FRED enumeration.
>
>Signed-off-by: Xin Li <xin3.li@xxxxxxxxx>
>Tested-by: Shan Kang <shan.kang@xxxxxxxxx>

Reviewed-by: Chao Gao <chao.gao@xxxxxxxxx>

two nits below.

>---
>
>Change since v1:
>* Enable FRED MSRs intercept if FRED is no longer enumerated in CPUID
>  (Chao Gao).
>---
> arch/x86/kvm/vmx/vmx.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
>diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
>index 34b6676f60d8..d58ed2d3d379 100644
>--- a/arch/x86/kvm/vmx/vmx.c
>+++ b/arch/x86/kvm/vmx/vmx.c
>@@ -693,6 +693,9 @@ static bool is_valid_passthrough_msr(u32 msr)
> 	case MSR_LBR_CORE_TO ... MSR_LBR_CORE_TO + 8:
> 		/* LBR MSRs. These are handled in vmx_update_intercept_for_lbr_msrs() */
> 		return true;
>+	case MSR_IA32_FRED_RSP0 ... MSR_IA32_FRED_CONFIG:
>+		/* FRED MSRs should be passthrough to FRED guests only */

This comment sounds weird. It sounds like the code will be something like:
		if guest supports FRED
			return true
		else
			return false

how about "FRED MSRs are pass-thru'd to guests which enumerate FRED"?

Or to align with above comment for LBR MSRs, just say

/* FRED MSRs. These are handled in vmx_vcpu_config_fred_after_set_cpuid() */

>+		return true;
> 	}
> 
> 	r = possible_passthrough_msr_slot(msr) != -ENOENT;
>@@ -7774,10 +7777,12 @@ static void update_intel_pt_cfg(struct kvm_vcpu *vcpu)
> static void vmx_vcpu_config_fred_after_set_cpuid(struct kvm_vcpu *vcpu)
> {
> 	struct vcpu_vmx *vmx = to_vmx(vcpu);
>+	bool fred_enumerated;
> 
> 	kvm_governed_feature_check_and_set(vcpu, X86_FEATURE_FRED);
>+	fred_enumerated = guest_can_use(vcpu, X86_FEATURE_FRED);
> 
>-	if (guest_can_use(vcpu, X86_FEATURE_FRED)) {
>+	if (fred_enumerated) {
> 		vm_entry_controls_setbit(vmx, VM_ENTRY_LOAD_IA32_FRED);
> 		secondary_vm_exit_controls_setbit(vmx,
> 						  SECONDARY_VM_EXIT_SAVE_IA32_FRED |
>@@ -7788,6 +7793,16 @@ static void vmx_vcpu_config_fred_after_set_cpuid(struct kvm_vcpu *vcpu)
> 						    SECONDARY_VM_EXIT_SAVE_IA32_FRED |
> 						    SECONDARY_VM_EXIT_LOAD_IA32_FRED);
> 	}
>+
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_RSP0, MSR_TYPE_RW, !fred_enumerated);
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_RSP1, MSR_TYPE_RW, !fred_enumerated);
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_RSP2, MSR_TYPE_RW, !fred_enumerated);
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_RSP3, MSR_TYPE_RW, !fred_enumerated);
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_STKLVLS, MSR_TYPE_RW, !fred_enumerated);
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_SSP1, MSR_TYPE_RW, !fred_enumerated);
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_SSP2, MSR_TYPE_RW, !fred_enumerated);
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_SSP3, MSR_TYPE_RW, !fred_enumerated);
>+	vmx_set_intercept_for_msr(vcpu, MSR_IA32_FRED_CONFIG, MSR_TYPE_RW, !fred_enumerated);

Use a for-loop here? e.g., 
	for (i = MSR_IA32_FRED_RSP0; i <= MSR_IA32_FRED_CONFIG; i++)
> }
> 
> static void vmx_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
>-- 
>2.43.0
>
>




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux