[PATCH net-next v2 5/6] selftests: drv-net: construct environment for running tests which require an endpoint

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nothing surprising here, hopefully. Wrap the variables from
the environment into a class or spawn a netdevsim based env
and pass it to the tests.

Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
---
 .../testing/selftests/drivers/net/README.rst  | 33 +++++++
 .../selftests/drivers/net/lib/py/env.py       | 98 ++++++++++++++++++-
 .../testing/selftests/net/lib/py/__init__.py  |  1 +
 tools/testing/selftests/net/lib/py/netns.py   | 31 ++++++
 4 files changed, 162 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/net/lib/py/netns.py

diff --git a/tools/testing/selftests/drivers/net/README.rst b/tools/testing/selftests/drivers/net/README.rst
index 5ef7c417d431..0cbab33dad1f 100644
--- a/tools/testing/selftests/drivers/net/README.rst
+++ b/tools/testing/selftests/drivers/net/README.rst
@@ -23,8 +23,41 @@ Variables can be set in the environment or by creating a net.config
   # Variable set in a file
   NETIF=eth0
 
+Please note that the config parser is very simple, if there are
+any non-alphanumeric characters in the value it needs to be in
+double quotes.
+
 NETIF
 ~~~~~
 
 Name of the netdevice against which the test should be executed.
 When empty or not set software devices will be used.
+
+LOCAL_V4, LOCAL_V6, REMOTE_V4, REMOTE_V6
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Local and remote endpoint IP addresses.
+
+REMOTE_TYPE
+~~~~~~~~~~~
+
+Communication method used to run commands on the remote endpoint.
+Test framework has built-in support for ``netns`` and ``ssh`` channels.
+``netns`` assumes the "remote" interface is part of the same
+host, just moved to the specified netns.
+``ssh`` communicates with remote endpoint over ``ssh`` and ``scp``.
+Using persistent SSH connections is strongly encouraged to avoid
+the latency of SSH connection setup on every command.
+
+Communication methods are defined by classes in ``lib/py/remote_{name}.py``.
+It should be possible to add a new method without modifying any of
+the framework, by simply adding an appropriately named file to ``lib/py``.
+
+REMOTE_ARGS
+~~~~~~~~~~~
+
+Arguments used to construct the communication channel.
+Communication channel dependent::
+
+  for netns - name of the "remote" namespace
+  for ssh - name/address of the remote host
diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py
index a081e168f3db..d6d1ec8f3a77 100644
--- a/tools/testing/selftests/drivers/net/lib/py/env.py
+++ b/tools/testing/selftests/drivers/net/lib/py/env.py
@@ -4,7 +4,8 @@ import os
 import shlex
 from pathlib import Path
 from lib.py import ip
-from lib.py import NetdevSimDev
+from lib.py import NetNS, NetdevSimDev
+from .remote import Remote
 
 
 def _load_env_file(src_path):
@@ -59,3 +60,98 @@ from lib.py import NetdevSimDev
             self._ns = None
 
 
+class NetDrvEpEnv:
+    """
+    Class for an environment with a local device and "remote endpoint"
+    which can be used to send traffic in.
+
+    For local testing it creates two network namespaces and a pair
+    of netdevsim devices.
+    """
+
+    # Network prefixes used for local tests
+    nsim_v4_pfx = "192.0.2."
+    nsim_v6_pfx = "2001:db8::"
+
+    def __init__(self, src_path):
+
+        self.env = _load_env_file(src_path)
+
+        # Things we try to destroy
+        self.remote = None
+        # These are for local testing state
+        self._netns = None
+        self._ns = None
+        self._ns_peer = None
+
+        if "NETIF" in self.env:
+            self.dev = ip("link show dev " + self.env['NETIF'], json=True)[0]
+
+            self.v4 = self.env.get("LOCAL_V4")
+            self.v6 = self.env.get("LOCAL_V6")
+            self.remote_v4 = self.env.get("REMOTE_V4")
+            self.remote_v6 = self.env.get("REMOTE_V6")
+            kind = self.env["REMOTE_TYPE"]
+            args = self.env["REMOTE_ARGS"]
+        else:
+            self.create_local()
+
+            self.dev = self._ns.nsims[0].dev
+
+            self.v4 = self.nsim_v4_pfx + "1"
+            self.v6 = self.nsim_v6_pfx + "1"
+            self.remote_v4 = self.nsim_v4_pfx + "2"
+            self.remote_v6 = self.nsim_v6_pfx + "2"
+            kind = "netns"
+            args = self._netns.name
+
+        self.remote = Remote(kind, args)
+
+        self.addr = self.v6 if self.v6 else self.v4
+        self.remote_addr = self.remote_v6 if self.remote_v6 else self.remote_v4
+
+        self.ifname = self.dev['ifname']
+        self.ifindex = self.dev['ifindex']
+
+    def create_local(self):
+        self._netns = NetNS()
+        self._ns = NetdevSimDev()
+        self._ns_peer = NetdevSimDev(ns=self._netns)
+
+        with open("/proc/self/ns/net") as nsfd0, \
+             open("/var/run/netns/" + self._netns.name) as nsfd1:
+            ifi0 = self._ns.nsims[0].ifindex
+            ifi1 = self._ns_peer.nsims[0].ifindex
+            NetdevSimDev.ctrl_write('link_device',
+                                    f'{nsfd0.fileno()}:{ifi0} {nsfd1.fileno()}:{ifi1}')
+
+        ip(f"   addr add dev {self._ns.nsims[0].ifname} {self.nsim_v4_pfx}1/24")
+        ip(f"-6 addr add dev {self._ns.nsims[0].ifname} {self.nsim_v6_pfx}1/64 nodad")
+        ip(f"   link set dev {self._ns.nsims[0].ifname} up")
+
+        ip(f"   addr add dev {self._ns_peer.nsims[0].ifname} {self.nsim_v4_pfx}2/24", ns=self._netns)
+        ip(f"-6 addr add dev {self._ns_peer.nsims[0].ifname} {self.nsim_v6_pfx}2/64 nodad", ns=self._netns)
+        ip(f"   link set dev {self._ns_peer.nsims[0].ifname} up", ns=self._netns)
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, ex_type, ex_value, ex_tb):
+        """
+        __exit__ gets called at the end of a "with" block.
+        """
+        self.__del__()
+
+    def __del__(self):
+        if self._ns:
+            self._ns.remove()
+            self._ns = None
+        if self._ns_peer:
+            self._ns_peer.remove()
+            self._ns_peer = None
+        if self._netns:
+            del self._netns
+            self._netns = None
+        if self.remote:
+            del self.remote
+            self.remote = None
diff --git a/tools/testing/selftests/net/lib/py/__init__.py b/tools/testing/selftests/net/lib/py/__init__.py
index ded7102df18a..b6d498d125fe 100644
--- a/tools/testing/selftests/net/lib/py/__init__.py
+++ b/tools/testing/selftests/net/lib/py/__init__.py
@@ -2,6 +2,7 @@
 
 from .consts import KSRC
 from .ksft import *
+from .netns import NetNS
 from .nsim import *
 from .utils import *
 from .ynl import NlError, YnlFamily, EthtoolFamily, NetdevFamily, RtnlFamily
diff --git a/tools/testing/selftests/net/lib/py/netns.py b/tools/testing/selftests/net/lib/py/netns.py
new file mode 100644
index 000000000000..ecff85f9074f
--- /dev/null
+++ b/tools/testing/selftests/net/lib/py/netns.py
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+
+from .utils import ip
+import random
+import string
+
+
+class NetNS:
+    def __init__(self, name=None):
+        if name:
+            self.name = name
+        else:
+            self.name = ''.join(random.choice(string.ascii_lowercase) for _ in range(8))
+        ip('netns add ' + self.name)
+
+    def __del__(self):
+        if self.name:
+            ip('netns del ' + self.name)
+            self.name = None
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, ex_type, ex_value, ex_tb):
+        self.__del__()
+
+    def __str__(self):
+        return self.name
+
+    def __repr__(self):
+        return f"NetNS({self.name})"
-- 
2.44.0





[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux