Hi Ido, On Tue, 2024-02-27 at 19:04 +0200, Ido Schimmel wrote: > Rename some test cases to avoid overlapping test names which is > problematic for the kernel test robot. No changes in the test's > logic. > > Suggested-by: Yujie Liu <yujie.liu@xxxxxxxxx> > Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxx> > --- > Yujie Liu, please verify this works for you. This patch works well in the kernel test robot. Now there is no problem of overlapping test names. Thanks. Tested-by: Yujie Liu <yujie.liu@xxxxxxxxx> # Control path: Flush # ------------------- # TEST: Flush all [ OK ] # TEST: Flush by port - matching [ OK ] # TEST: Flush by port - non-matching [ OK ] # TEST: Flush by source VNI - matching [ OK ] # TEST: Flush by source VNI - non-matching [ OK ] # TEST: Flush by "permanent" state [ OK ] # TEST: Flush by "nopermanent" state [ OK ] # TEST: Flush by routing protocol - matching [ OK ] # TEST: Flush by routing protocol - non-matching [ OK ] # TEST: Flush by IPv4 destination IP - matching [ OK ] # TEST: Flush by IPv4 destination IP - non-matching [ OK ] # TEST: Flush by IPv6 destination IP - matching [ OK ] # TEST: Flush by IPv6 destination IP - non-matching [ OK ] # TEST: Flush by UDP destination port - matching [ OK ] # TEST: Flush by UDP destination port - non-matching [ OK ] # TEST: Flush by device's UDP destination port - matching [ OK ] # TEST: Flush by device's UDP destination port - non-matching [ OK ] # TEST: Flush by destination VNI - matching [ OK ] # TEST: Flush by destination VNI - non-matching [ OK ] # TEST: Flush by destination VNI equal to source VNI - matching [ OK ] # TEST: Flush by destination VNI equal to source VNI - non-matching [ OK ] # TEST: Flush by VLAN ID [ OK ] > --- > tools/testing/selftests/net/test_vxlan_mdb.sh | 36 +++++++++---------- > 1 file changed, 18 insertions(+), 18 deletions(-) > > diff --git a/tools/testing/selftests/net/test_vxlan_mdb.sh b/tools/testing/selftests/net/test_vxlan_mdb.sh > index 84a05a9e46d8..74ff9fb2a6f0 100755 > --- a/tools/testing/selftests/net/test_vxlan_mdb.sh > +++ b/tools/testing/selftests/net/test_vxlan_mdb.sh > @@ -1014,10 +1014,10 @@ flush() > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port vx0" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010" > - log_test $? 254 "Flush by port" > + log_test $? 254 "Flush by port - matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port veth0" > - log_test $? 255 "Flush by wrong port" > + log_test $? 255 "Flush by port - non-matching" > > # Check that when flushing by source VNI only entries programmed with > # the specified source VNI are flushed and the rest are not. > @@ -1030,9 +1030,9 @@ flush() > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 src_vni 10010" > > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010" > - log_test $? 254 "Flush by specified source VNI" > + log_test $? 254 "Flush by source VNI - matching" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10011" > - log_test $? 0 "Flush by unspecified source VNI" > + log_test $? 0 "Flush by source VNI - non-matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" > > @@ -1058,9 +1058,9 @@ flush() > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 proto bgp" > > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"proto bgp\"" > - log_test $? 1 "Flush by specified routing protocol" > + log_test $? 1 "Flush by routing protocol - matching" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"proto zebra\"" > - log_test $? 0 "Flush by unspecified routing protocol" > + log_test $? 0 "Flush by routing protocol - non-matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" > > @@ -1075,9 +1075,9 @@ flush() > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 198.51.100.2" > > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" > - log_test $? 1 "Flush by specified destination IP - IPv4" > + log_test $? 1 "Flush by IPv4 destination IP - matching" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" > - log_test $? 0 "Flush by unspecified destination IP - IPv4" > + log_test $? 0 "Flush by IPv4 destination IP - non-matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" > > @@ -1089,9 +1089,9 @@ flush() > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 2001:db8:1000::2" > > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::2" > - log_test $? 1 "Flush by specified destination IP - IPv6" > + log_test $? 1 "Flush by IPv6 destination IP - matching" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::1" > - log_test $? 0 "Flush by unspecified destination IP - IPv6" > + log_test $? 0 "Flush by IPv6 destination IP - non-matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" > > @@ -1104,9 +1104,9 @@ flush() > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 11111" > > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"dst_port 11111\"" > - log_test $? 1 "Flush by specified UDP destination port" > + log_test $? 1 "Flush by UDP destination port - matching" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"dst_port 22222\"" > - log_test $? 0 "Flush by unspecified UDP destination port" > + log_test $? 0 "Flush by UDP destination port - non-matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" > > @@ -1121,9 +1121,9 @@ flush() > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 4789" > > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" > - log_test $? 1 "Flush by device's UDP destination port" > + log_test $? 1 "Flush by device's UDP destination port - matching" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" > - log_test $? 0 "Flush by unspecified UDP destination port" > + log_test $? 0 "Flush by device's UDP destination port - non-matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" > > @@ -1136,9 +1136,9 @@ flush() > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 20010" > > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \" vni 20010\"" > - log_test $? 1 "Flush by specified destination VNI" > + log_test $? 1 "Flush by destination VNI - matching" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \" vni 20011\"" > - log_test $? 0 "Flush by unspecified destination VNI" > + log_test $? 0 "Flush by destination VNI - non-matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" > > @@ -1153,9 +1153,9 @@ flush() > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 10010" > > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" > - log_test $? 1 "Flush by destination VNI equal to source VNI" > + log_test $? 1 "Flush by destination VNI equal to source VNI - matching" > run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" > - log_test $? 0 "Flush by unspecified destination VNI" > + log_test $? 0 "Flush by destination VNI equal to source VNI - non-matching" > > run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" >
