Paolo points out that ifconfig is legacy and we should not use it.
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
---
CC: shuah@xxxxxxxxxx
CC: horms@xxxxxxxxxx
CC: linux-kselftest@xxxxxxxxxxxxxxx
---
.../drivers/net/netdevsim/udp_tunnel_nic.sh | 40 +++++++++----------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
index f98435c502f6..384cfa3d38a6 100755
--- a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
@@ -270,7 +270,7 @@ for port in 0 1; do
echo 1 > $NSIM_DEV_SYS/new_port
fi
NSIM_NETDEV=`get_netdev_name old_netdevs`
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
msg="new NIC device created"
exp0=( 0 0 0 0 )
@@ -284,8 +284,8 @@ for port in 0 1; do
msg="VxLAN v4 devices go down"
exp0=( 0 0 0 0 )
- ifconfig vxlan1 down
- ifconfig vxlan0 down
+ ip link set dev vxlan1 down
+ ip link set dev vxlan0 down
check_tables
msg="VxLAN v6 devices"
@@ -293,7 +293,7 @@ for port in 0 1; do
new_vxlan vxlanA 4789 $NSIM_NETDEV 6
for ifc in vxlan0 vxlan1; do
- ifconfig $ifc up
+ ip link set dev $ifc up
done
new_vxlan vxlanB 4789 $NSIM_NETDEV 6
@@ -307,14 +307,14 @@ for port in 0 1; do
new_geneve gnv0 6081
msg="NIC device goes down"
- ifconfig $NSIM_NETDEV down
+ ip link set dev $NSIM_NETDEV down
if [ $port -eq 1 ]; then
exp0=( 0 0 0 0 )
exp1=( 0 0 0 0 )
fi
check_tables
msg="NIC device goes up again"
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
exp0=( `mke 4789 1` `mke 4790 1` 0 0 )
exp1=( `mke 6081 2` 0 0 0 )
check_tables
@@ -433,7 +433,7 @@ for port in 0 1; do
echo $port > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
overflow_table0 "overflow NIC table"
overflow_table1 "overflow NIC table"
@@ -491,7 +491,7 @@ for port in 0 1; do
echo $port > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
overflow_table0 "overflow NIC table"
overflow_table1 "overflow NIC table"
@@ -548,7 +548,7 @@ for port in 0 1; do
echo $port > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
overflow_table0 "destroy NIC"
overflow_table1 "destroy NIC"
@@ -578,7 +578,7 @@ for port in 0 1; do
echo $port > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
msg="create VxLANs v6"
new_vxlan vxlanA0 10000 $NSIM_NETDEV 6
@@ -639,7 +639,7 @@ for port in 0 1; do
echo $port > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
@@ -695,7 +695,7 @@ for port in 0 1; do
echo $port > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
msg="create VxLANs v6"
exp0=( `mke 10000 1` 0 0 0 )
@@ -755,7 +755,7 @@ for port in 0 1; do
echo $port > $NSIM_DEV_SYS/new_port
NSIM_NETDEV=`get_netdev_name old_netdevs`
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
msg="create VxLANs v6"
exp0=( `mke 10000 1` 0 0 0 )
@@ -768,7 +768,7 @@ for port in 0 1; do
check_tables
msg="NIC device goes down"
- ifconfig $NSIM_NETDEV down
+ ip link set dev $NSIM_NETDEV down
if [ $port -eq 1 ]; then
exp0=( 0 0 0 0 )
exp1=( 0 0 0 0 )
@@ -779,7 +779,7 @@ for port in 0 1; do
check_tables
msg="NIC device goes up again"
- ifconfig $NSIM_NETDEV up
+ ip link set dev $NSIM_NETDEV up
exp0=( `mke 10000 1` 0 0 0 )
check_tables
@@ -827,12 +827,12 @@ new_vxlan vxlan1 4789 $NSIM_NETDEV2
msg="VxLAN v4 devices go down"
exp0=( 0 0 0 0 )
-ifconfig vxlan1 down
-ifconfig vxlan0 down
+ip link set dev vxlan1 down
+ip link set dev vxlan0 down
check_tables
for ifc in vxlan0 vxlan1; do
- ifconfig $ifc up
+ ip link set dev $ifc up
done
msg="VxLAN v6 device"
@@ -844,11 +844,11 @@ exp1=( `mke 6081 2` 0 0 0 )
new_geneve gnv0 6081
msg="NIC device goes down"
-ifconfig $NSIM_NETDEV down
+ip link set dev $NSIM_NETDEV down
check_tables
msg="NIC device goes up again"
-ifconfig $NSIM_NETDEV up
+ip link set dev $NSIM_NETDEV up
check_tables
for i in `seq 2`; do
--
2.43.0
