Re: [net-next v1 09/16] page_pool: device memory support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Dec 10, 2023 at 8:04 PM Mina Almasry <almasrymina@xxxxxxxxxx> wrote:
>
> On Sun, Dec 10, 2023 at 6:26 PM Mina Almasry <almasrymina@xxxxxxxxxx> wrote:
> >
> > On Sun, Dec 10, 2023 at 6:04 PM Yunsheng Lin <linyunsheng@xxxxxxxxxx> wrote:
> > >
> > > On 2023/12/9 0:05, Mina Almasry wrote:
> > > > On Fri, Dec 8, 2023 at 1:30 AM Yunsheng Lin <linyunsheng@xxxxxxxxxx> wrote:
> > > >>
> > > >>
> > > >> As mentioned before, it seems we need to have the above checking every
> > > >> time we need to do some per-page handling in page_pool core, is there
> > > >> a plan in your mind how to remove those kind of checking in the future?
> > > >>
> > > >
> > > > I see 2 ways to remove the checking, both infeasible:
> > > >
> > > > 1. Allocate a wrapper struct that pulls out all the fields the page pool needs:
> > > >
> > > > struct netmem {
> > > >         /* common fields */
> > > >         refcount_t refcount;
> > > >         bool is_pfmemalloc;
> > > >         int nid;
> > > >         ...
> > > >         union {
> > > >                 struct dmabuf_genpool_chunk_owner *owner;
> > > >                 struct page * page;
> > > >         };
> > > > };
> > > >
> > > > The page pool can then not care if the underlying memory is iov or
> > > > page. However this introduces significant memory bloat as this struct
> > > > needs to be allocated for each page or ppiov, which I imagine is not
> > > > acceptable for the upside of removing a few static_branch'd if
> > > > statements with no performance cost.
> > > >
> > > > 2. Create a unified struct for page and dmabuf memory, which the mm
> > > > folks have repeatedly nacked, and I imagine will repeatedly nack in
> > > > the future.
> > > >
> > > > So I imagine the special handling of ppiov in some form is critical
> > > > and the checking may not be removable.
> > >
> > > If the above is true, perhaps devmem is not really supposed to be intergated
> > > into page_pool.
> > >
> > > Adding a checking for every per-page handling in page_pool core is just too
> > > hacky to be really considerred a longterm solution.
> > >
> >
> > The only other option is to implement another page_pool for ppiov and
> > have the driver create page_pool or ppiov_pool depending on the state
> > of the netdev_rx_queue (or some helper in the net stack to do that for
> > the driver). This introduces some code duplication. The ppiov_pool &
> > page_pool would look similar in implementation.
> >
> > But this was all discussed in detail in RFC v2 and the last response I
> > heard from Jesper was in favor if this approach, if I understand
> > correctly:
> >
> > https://lore.kernel.org/netdev/7aedc5d5-0daf-63be-21bc-3b724cc1cab9@xxxxxxxxxx/
> >
> > Would love to have the maintainer weigh in here.
> >
>
> I should note we may be able to remove some of the checking, but maybe not all.
>
> - Checks that disable page fragging for ppiov can be removed once
> ppiov has frag support (in this series or follow up).
>
> - If we use page->pp_frag_count (or page->pp_ref_count) for
> refcounting ppiov, we can remove the if checking in the refcounting.
>
> - We may be able to store the dma_addr of the ppiov in page->dma_addr,
> but I'm unsure if that actually works, because the dma_buf dmaddr is
> dma_addr_t (u32 or u64), but page->dma_addr is unsigned long (4 bytes
> I think). But if it works for pages I may be able to make it work for
> ppiov as well.
>
> - Checks that obtain the page->pp can work with ppiov if we align the
> offset of page->pp and ppiov->pp.
>
> - Checks around page->pp_magic can be removed if we also have offset
> aligned ppiov->pp_magic.
>
> Sadly I don't see us removing the checking for these other cases:
>
> - page_is_pfmemalloc(): I'm not allowed to pass a non-struct page into
> that helper.
>
> - page_to_nid(): I'm not allowed to pass a non-struct page into that helper.
>
> - page_pool_free_va(): ppiov have no va.
>
> - page_pool_sync_for_dev/page_pool_dma_map: ppiov backed by dma-buf
> fundamentally can't get mapped again.
>
> Are the removal (or future removal) of these checks enough to resolve this?
>

I took a deeper look here, and with some effort I'm able to remove
almost all the custom checks for ppiov. The only remaining checks for
devmem are the checks around these mm calls:

page_is_pfmemalloc()
page_to_nid()
page_ref_count()
compound_head()

page_is_pfmemalloc() checks can be removed by using a bit
page->pp_magic potentially to indicate pfmemalloc().

The other 3, I'm not sure I can remove. They rely on the page flags or
other fields not specific to page_pool pages. The next version should
come with the most minimal amount of devmem checks for the page_pool.

> > > It is somewhat ironical that devmem is using static_branch to alliviate the
> > > performance impact for normal memory at the possible cost of performance
> > > degradation for devmem, does it not defeat some purpose of intergating devmem
> > > to page_pool?
> > >
> >
> > I don't see the issue. The static branch sets the non-ppiov path as
> > default if no memory providers are in use, and flips it when they are,
> > making the default branch prediction ideal in both cases.
> >
> > > >
> > > >> Even though a static_branch check is added in page_is_page_pool_iov(), it
> > > >> does not make much sense that a core has tow different 'struct' for its
> > > >> most basic data.
> > > >>
> > > >> IMHO, the ppiov for dmabuf is forced fitting into page_pool without much
> > > >> design consideration at this point.
> > > >>
> > > > ...
> > > >>
> > > >> For now, the above may work for the the rx part as it seems that you are
> > > >> only enabling rx for dmabuf for now.
> > > >>
> > > >> What is the plan to enable tx for dmabuf? If it is also intergrated into
> > > >> page_pool? There was a attempt to enable page_pool for tx, Eric seemed to
> > > >> have some comment about this:
> > > >> https://lkml.kernel.org/netdev/2cf4b672-d7dc-db3d-ce90-15b4e91c4005@xxxxxxxxxx/T/#mb6ab62dc22f38ec621d516259c56dd66353e24a2
> > > >>
> > > >> If tx is not intergrated into page_pool, do we need to create a new layer for
> > > >> the tx dmabuf?
> > > >>
> > > >
> > > > I imagine the TX path will reuse page_pool_iov, page_pool_iov_*()
> > > > helpers, and page_pool_page_*() helpers, but will not need any core
> > > > page_pool changes. This is because the TX path will have to piggyback
> > >
> > > We may need another bit/flags checking to demux between page_pool owned
> > > devmem and non-page_pool owned devmem.
> > >
> >
> > The way I'm imagining the support, I don't see the need for such
> > flags. We'd be re-using generic helpers like
> > page_pool_iov_get_dma_address() and what not that don't need that
> > checking.
> >
> > > Also calling page_pool_*() on non-page_pool owned devmem is confusing
> > > enough that we may need a thin layer handling non-page_pool owned devmem
> > > in the end.
> > >
> >
> > The page_pool_page* & page_pool_iov* functions can be renamed if
> > confusing. I would think that's no issue (note that the page_pool_*
> > functions need not be called for TX path).
> >
> > > > on MSG_ZEROCOPY (devmem is not copyable), so no memory allocation from
> > > > the page_pool (or otherwise) is needed or possible. RFCv1 had a TX
> > > > implementation based on dmabuf pages without page_pool involvement, I
> > > > imagine I'll do something similar.
> > > It would be good to have a tx implementation for the next version, so
> > > that we can have a whole picture of devmem.
> > >
> > > >
> >
> >
> >
> > --
> > Thanks,
> > Mina
>
>
>
> --
> Thanks,
> Mina



-- 
Thanks,
Mina





[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux