Here is the test result after conversion. There are some failures, but it also exists on my system without this patch. So it's not affectec by this patch and I will check the reason later. ]# time ./fcnal-test.sh /usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin) ########################################################################### IPv4 ping ########################################################################### ################################################################# No VRF SYSCTL: net.ipv4.raw_l3mdev_accept=0 TEST: ping out - ns-B IP [ OK ] TEST: ping out, device bind - ns-B IP [ OK ] TEST: ping out, address bind - ns-B IP [ OK ] ... ################################################################# SNAT on VRF TEST: IPv4 TCP connection over VRF with SNAT [ OK ] TEST: IPv6 TCP connection over VRF with SNAT [ OK ] Tests passed: 893 Tests failed: 21 real 52m48.178s user 0m34.158s sys 1m42.976s BTW, this test needs a really long time. So expand the timeout to 1h. Acked-by: David Ahern <dsahern@xxxxxxxxxx> Signed-off-by: Hangbin Liu <liuhangbin@xxxxxxxxx> --- tools/testing/selftests/net/fcnal-test.sh | 30 ++++++++++------------- tools/testing/selftests/net/settings | 2 +- 2 files changed, 14 insertions(+), 18 deletions(-) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index d32a14ba069a..0d4f252427e2 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -37,9 +37,7 @@ # # server / client nomenclature relative to ns-A -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - +source lib.sh VERBOSE=0 NSA_DEV=eth1 @@ -82,14 +80,6 @@ MCAST=ff02::1 NSA_LINKIP6= NSB_LINKIP6= -NSA=ns-A -NSB=ns-B -NSC=ns-C - -NSA_CMD="ip netns exec ${NSA}" -NSB_CMD="ip netns exec ${NSB}" -NSC_CMD="ip netns exec ${NSC}" - which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) # Check if FIPS mode is enabled @@ -406,9 +396,6 @@ create_ns() local addr=$2 local addr6=$3 - ip netns add ${ns} - - ip -netns ${ns} link set lo up if [ "${addr}" != "-" ]; then ip -netns ${ns} addr add dev lo ${addr} fi @@ -467,13 +454,12 @@ cleanup() ip -netns ${NSA} link del dev ${NSA_DEV} ip netns pids ${NSA} | xargs kill 2>/dev/null - ip netns del ${NSA} + cleanup_ns ${NSA} fi ip netns pids ${NSB} | xargs kill 2>/dev/null - ip netns del ${NSB} ip netns pids ${NSC} | xargs kill 2>/dev/null - ip netns del ${NSC} >/dev/null 2>&1 + cleanup_ns ${NSB} ${NSC} } cleanup_vrf_dup() @@ -487,6 +473,8 @@ setup_vrf_dup() { # some VRF tests use ns-C which has the same config as # ns-B but for a device NOT in the VRF + setup_ns NSC + NSC_CMD="ip netns exec ${NSC}" create_ns ${NSC} "-" "-" connect_ns ${NSA} ${NSA_DEV2} ${NSA_IP}/24 ${NSA_IP6}/64 \ ${NSC} ${NSC_DEV} ${NSB_IP}/24 ${NSB_IP6}/64 @@ -503,6 +491,10 @@ setup() log_debug "Configuring network namespaces" set -e + setup_ns NSA NSB + NSA_CMD="ip netns exec ${NSA}" + NSB_CMD="ip netns exec ${NSB}" + create_ns ${NSA} ${NSA_LO_IP}/32 ${NSA_LO_IP6}/128 create_ns ${NSB} ${NSB_LO_IP}/32 ${NSB_LO_IP6}/128 connect_ns ${NSA} ${NSA_DEV} ${NSA_IP}/24 ${NSA_IP6}/64 \ @@ -545,6 +537,10 @@ setup_lla_only() log_debug "Configuring network namespaces" set -e + setup_ns NSA NSB NSC + NSA_CMD="ip netns exec ${NSA}" + NSB_CMD="ip netns exec ${NSB}" + NSC_CMD="ip netns exec ${NSC}" create_ns ${NSA} "-" "-" create_ns ${NSB} "-" "-" create_ns ${NSC} "-" "-" diff --git a/tools/testing/selftests/net/settings b/tools/testing/selftests/net/settings index dfc27cdc6c05..ed8418e8217a 100644 --- a/tools/testing/selftests/net/settings +++ b/tools/testing/selftests/net/settings @@ -1 +1 @@ -timeout=1500 +timeout=3600 -- 2.43.0