[PATCH V12 6/7] Documentation: amd-pstate: introduce amd-pstate preferred core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Introduce amd-pstate preferred core.

check preferred core state set by the kernel parameter:
$ cat /sys/devices/system/cpu/amd-pstate/prefcore

Tested-by: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
Reviewed-by: Wyes Karny <wyes.karny@xxxxxxx>
Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Reviewed-by: Huang Rui <ray.huang@xxxxxxx>
Reviewed-by: Perry Yuan <perry.yuan@xxxxxxx>
Signed-off-by: Meng Li <li.meng@xxxxxxx>
---
 Documentation/admin-guide/pm/amd-pstate.rst | 59 ++++++++++++++++++++-
 1 file changed, 57 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
index 1cf40f69278c..0b832ff529db 100644
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -300,8 +300,8 @@ platforms. The AMD P-States mechanism is the more performance and energy
 efficiency frequency management method on AMD processors.
 
 
-AMD Pstate Driver Operation Modes
-=================================
+``amd-pstate`` Driver Operation Modes
+======================================
 
 ``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode,
 non-autonomous (passive) mode and guided autonomous (guided) mode.
@@ -353,6 +353,48 @@ is activated.  In this mode, driver requests minimum and maximum performance
 level and the platform autonomously selects a performance level in this range
 and appropriate to the current workload.
 
+``amd-pstate`` Preferred Core
+=================================
+
+The core frequency is subjected to the process variation in semiconductors.
+Not all cores are able to reach the maximum frequency respecting the
+infrastructure limits. Consequently, AMD has redefined the concept of
+maximum frequency of a part. This means that a fraction of cores can reach
+maximum frequency. To find the best process scheduling policy for a given
+scenario, OS needs to know the core ordering informed by the platform through
+highest performance capability register of the CPPC interface.
+
+``amd-pstate`` preferred core enables the scheduler to prefer scheduling on
+cores that can achieve a higher frequency with lower voltage. The preferred
+core rankings can dynamically change based on the workload, platform conditions,
+thermals and ageing.
+
+The priority metric will be initialized by the ``amd-pstate`` driver. The ``amd-pstate``
+driver will also determine whether or not ``amd-pstate`` preferred core is
+supported by the platform.
+
+``amd-pstate`` driver will provide an initial core ordering when the system boots.
+The platform uses the CPPC interfaces to communicate the core ranking to the
+operating system and scheduler to make sure that OS is choosing the cores
+with highest performance firstly for scheduling the process. When ``amd-pstate``
+driver receives a message with the highest performance change, it will
+update the core ranking and set the cpu's priority.
+
+``amd-pstate`` Preferred Core Switch
+=================================
+Kernel Parameters
+-----------------
+
+``amd-pstate`` peferred core`` has two states: enable and disable.
+Enable/disable states can be chosen by different kernel parameters.
+Default enable ``amd-pstate`` preferred core.
+
+``amd_prefcore=disable``
+
+For systems that support ``amd-pstate`` preferred core, the core rankings will
+always be advertised by the platform. But OS can choose to ignore that via the
+kernel parameter ``amd_prefcore=disable``.
+
 User Space Interface in ``sysfs`` - General
 ===========================================
 
@@ -385,6 +427,19 @@ control its functionality at the system level.  They are located in the
         to the operation mode represented by that string - or to be
         unregistered in the "disable" case.
 
+``prefcore``
+	Preferred core state of the driver: "enabled" or "disabled".
+
+	"enabled"
+		Enable the ``amd-pstate`` preferred core.
+
+	"disabled"
+		Disable the ``amd-pstate`` preferred core
+
+
+        This attribute is read-only to check the state of preferred core set
+        by the kernel parameter.
+
 ``cpupower`` tool support for ``amd-pstate``
 ===============================================
 
-- 
2.34.1





[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux