[PATCH] kselftest/clone3: Make test names for set_tid test stable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The test results reported for the clone3_set_tid tests interact poorly with
automation for running kselftest since the reported test names include TIDs
dynamically allocated at runtime. A lot of automation for running kselftest
will compare runs by looking at the test name to identify if the same test
is being run so changing names make it look like the testsuite has been
updated to include new tests. This makes the results display less clearly
and breaks cases like bisection.

Address this by providing a brief description of the tests and logging that
along with the stable parameters for the test currently logged. The TIDs
are already logged separately in existing logging except for the final test
which has a new log message added. We also tweak the formatting of the
logging of expected/actual values for clarity.

There are still issues with the logging of skipped tests (many are simply
not logged at all when skipped and all are logged with different names) but
these are less disruptive since the skips are all based on not being run as
root, a condition likely to be stable for a given test system.

Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 tools/testing/selftests/clone3/clone3_set_tid.c | 117 ++++++++++++++----------
 1 file changed, 69 insertions(+), 48 deletions(-)

diff --git a/tools/testing/selftests/clone3/clone3_set_tid.c b/tools/testing/selftests/clone3/clone3_set_tid.c
index ed785afb6077..9ae38733cb6e 100644
--- a/tools/testing/selftests/clone3/clone3_set_tid.c
+++ b/tools/testing/selftests/clone3/clone3_set_tid.c
@@ -114,7 +114,8 @@ static int call_clone3_set_tid(pid_t *set_tid,
 	return WEXITSTATUS(status);
 }
 
-static void test_clone3_set_tid(pid_t *set_tid,
+static void test_clone3_set_tid(const char *desc,
+				pid_t *set_tid,
 				size_t set_tid_size,
 				int flags,
 				int expected,
@@ -129,17 +130,13 @@ static void test_clone3_set_tid(pid_t *set_tid,
 	ret = call_clone3_set_tid(set_tid, set_tid_size, flags, expected_pid,
 				  wait_for_it);
 	ksft_print_msg(
-		"[%d] clone3() with CLONE_SET_TID %d says :%d - expected %d\n",
+		"[%d] clone3() with CLONE_SET_TID %d says: %d - expected %d\n",
 		getpid(), set_tid[0], ret, expected);
-	if (ret != expected)
-		ksft_test_result_fail(
-			"[%d] Result (%d) is different than expected (%d)\n",
-			getpid(), ret, expected);
-	else
-		ksft_test_result_pass(
-			"[%d] Result (%d) matches expectation (%d)\n",
-			getpid(), ret, expected);
+
+	ksft_test_result(ret == expected, "%s with %d TIDs and flags 0x%x\n",
+			 desc, set_tid_size, flags);
 }
+
 int main(int argc, char *argv[])
 {
 	FILE *f;
@@ -172,73 +169,91 @@ int main(int argc, char *argv[])
 
 	/* Try invalid settings */
 	memset(&set_tid, 0, sizeof(set_tid));
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL + 1, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, 0 TID",
+			    set_tid, MAX_PID_NS_LEVEL + 1, 0, -EINVAL, 0, 0);
 
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL * 2, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, 0 TID",
+			    set_tid, MAX_PID_NS_LEVEL * 2, 0, -EINVAL, 0, 0);
 
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL * 2 + 1, 0,
-			-EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, 0 TID",
+			    set_tid, MAX_PID_NS_LEVEL * 2 + 1, 0,
+			    -EINVAL, 0, 0);
 
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL * 42, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, 0 TID",
+			    set_tid, MAX_PID_NS_LEVEL * 42, 0, -EINVAL, 0, 0);
 
 	/*
 	 * This can actually work if this test running in a MAX_PID_NS_LEVEL - 1
 	 * nested PID namespace.
 	 */
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL - 1, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, 0 TID",
+			    set_tid, MAX_PID_NS_LEVEL - 1, 0, -EINVAL, 0, 0);
 
 	memset(&set_tid, 0xff, sizeof(set_tid));
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL + 1, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, TID all 1s",
+			    set_tid, MAX_PID_NS_LEVEL + 1, 0, -EINVAL, 0, 0);
 
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL * 2, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, TID all 1s",
+			    set_tid, MAX_PID_NS_LEVEL * 2, 0, -EINVAL, 0, 0);
 
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL * 2 + 1, 0,
-			-EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, TID all 1s",
+			    set_tid, MAX_PID_NS_LEVEL * 2 + 1, 0,
+			    -EINVAL, 0, 0);
 
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL * 42, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, TID all 1s",
+			    set_tid, MAX_PID_NS_LEVEL * 42, 0, -EINVAL, 0, 0);
 
 	/*
 	 * This can actually work if this test running in a MAX_PID_NS_LEVEL - 1
 	 * nested PID namespace.
 	 */
-	test_clone3_set_tid(set_tid, MAX_PID_NS_LEVEL - 1, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("invalid size, TID all 1s",
+			    set_tid, MAX_PID_NS_LEVEL - 1, 0, -EINVAL, 0, 0);
 
 	memset(&set_tid, 0, sizeof(set_tid));
 	/* Try with an invalid PID */
 	set_tid[0] = 0;
-	test_clone3_set_tid(set_tid, 1, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("valid size, 0 TID",
+			    set_tid, 1, 0, -EINVAL, 0, 0);
 
 	set_tid[0] = -1;
-	test_clone3_set_tid(set_tid, 1, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("valid size, -1 TID",
+			    set_tid, 1, 0, -EINVAL, 0, 0);
 
 	/* Claim that the set_tid array actually contains 2 elements. */
-	test_clone3_set_tid(set_tid, 2, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("2 TIDs, -1 and 0",
+			    set_tid, 2, 0, -EINVAL, 0, 0);
 
 	/* Try it in a new PID namespace */
 	if (uid == 0)
-		test_clone3_set_tid(set_tid, 1, CLONE_NEWPID, -EINVAL, 0, 0);
+		test_clone3_set_tid("valid size, -1 TID",
+				    set_tid, 1, CLONE_NEWPID, -EINVAL, 0, 0);
 	else
 		ksft_test_result_skip("Clone3() with set_tid requires root\n");
 
 	/* Try with a valid PID (1) this should return -EEXIST. */
 	set_tid[0] = 1;
 	if (uid == 0)
-		test_clone3_set_tid(set_tid, 1, 0, -EEXIST, 0, 0);
+		test_clone3_set_tid("duplicate PID 1",
+				    set_tid, 1, 0, -EEXIST, 0, 0);
 	else
 		ksft_test_result_skip("Clone3() with set_tid requires root\n");
 
 	/* Try it in a new PID namespace */
 	if (uid == 0)
-		test_clone3_set_tid(set_tid, 1, CLONE_NEWPID, 0, 0, 0);
+		test_clone3_set_tid("duplicate PID 1",
+				    set_tid, 1, CLONE_NEWPID, 0, 0, 0);
 	else
 		ksft_test_result_skip("Clone3() with set_tid requires root\n");
 
 	/* pid_max should fail everywhere */
 	set_tid[0] = pid_max;
-	test_clone3_set_tid(set_tid, 1, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("set TID to maximum",
+			    set_tid, 1, 0, -EINVAL, 0, 0);
 
 	if (uid == 0)
-		test_clone3_set_tid(set_tid, 1, CLONE_NEWPID, -EINVAL, 0, 0);
+		test_clone3_set_tid("set TID to maximum",
+				    set_tid, 1, CLONE_NEWPID, -EINVAL, 0, 0);
 	else
 		ksft_test_result_skip("Clone3() with set_tid requires root\n");
 
@@ -262,10 +277,12 @@ int main(int argc, char *argv[])
 
 	/* After the child has finished, its PID should be free. */
 	set_tid[0] = pid;
-	test_clone3_set_tid(set_tid, 1, 0, 0, 0, 0);
+	test_clone3_set_tid("reallocate child TID",
+			    set_tid, 1, 0, 0, 0, 0);
 
 	/* This should fail as there is no PID 1 in that namespace */
-	test_clone3_set_tid(set_tid, 1, CLONE_NEWPID, -EINVAL, 0, 0);
+	test_clone3_set_tid("duplicate child TID",
+			    set_tid, 1, CLONE_NEWPID, -EINVAL, 0, 0);
 
 	/*
 	 * Creating a process with PID 1 in the newly created most nested
@@ -274,7 +291,8 @@ int main(int argc, char *argv[])
 	 */
 	set_tid[0] = 1;
 	set_tid[1] = pid;
-	test_clone3_set_tid(set_tid, 2, CLONE_NEWPID, 0, pid, 0);
+	test_clone3_set_tid("create PID 1 in new NS",
+			    set_tid, 2, CLONE_NEWPID, 0, pid, 0);
 
 	ksft_print_msg("unshare PID namespace\n");
 	if (unshare(CLONE_NEWPID) == -1)
@@ -284,7 +302,8 @@ int main(int argc, char *argv[])
 	set_tid[0] = pid;
 
 	/* This should fail as there is no PID 1 in that namespace */
-	test_clone3_set_tid(set_tid, 1, 0, -EINVAL, 0, 0);
+	test_clone3_set_tid("duplicate PID 1",
+			    set_tid, 1, 0, -EINVAL, 0, 0);
 
 	/* Let's create a PID 1 */
 	ns_pid = fork();
@@ -295,21 +314,25 @@ int main(int argc, char *argv[])
 		 */
 		set_tid[0] = 43;
 		set_tid[1] = -1;
-		test_clone3_set_tid(set_tid, 2, 0, -EINVAL, 0, 0);
+		test_clone3_set_tid("check leak on invalid TID -1",
+				    set_tid, 2, 0, -EINVAL, 0, 0);
 
 		set_tid[0] = 43;
 		set_tid[1] = pid;
-		test_clone3_set_tid(set_tid, 2, 0, 0, 43, 0);
+		test_clone3_set_tid("check leak on invalid specific TID",
+				    set_tid, 2, 0, 0, 43, 0);
 
 		ksft_print_msg("Child in PID namespace has PID %d\n", getpid());
 		set_tid[0] = 2;
-		test_clone3_set_tid(set_tid, 1, 0, 0, 2, 0);
+		test_clone3_set_tid("create PID 2 in child NS",
+				    set_tid, 1, 0, 0, 2, 0);
 
 		set_tid[0] = 1;
 		set_tid[1] = -1;
 		set_tid[2] = pid;
 		/* This should fail as there is invalid PID at level '1'. */
-		test_clone3_set_tid(set_tid, 3, CLONE_NEWPID, -EINVAL, 0, 0);
+		test_clone3_set_tid("fail due to invalid TID at level 1",
+				    set_tid, 3, CLONE_NEWPID, -EINVAL, 0, 0);
 
 		set_tid[0] = 1;
 		set_tid[1] = 42;
@@ -319,13 +342,15 @@ int main(int argc, char *argv[])
 		 * namespaces. Again assuming this is running in the host's
 		 * PID namespace. Not yet nested.
 		 */
-		test_clone3_set_tid(set_tid, 4, CLONE_NEWPID, -EINVAL, 0, 0);
+		test_clone3_set_tid("fail due to too few active PID NSs",
+				    set_tid, 4, CLONE_NEWPID, -EINVAL, 0, 0);
 
 		/*
 		 * This should work and from the parent we should see
 		 * something like 'NSpid:	pid	42	1'.
 		 */
-		test_clone3_set_tid(set_tid, 3, CLONE_NEWPID, 0, 42, true);
+		test_clone3_set_tid("verify that we have 3 PID NSs",
+				    set_tid, 3, CLONE_NEWPID, 0, 42, true);
 
 		child_exit(ksft_cnt.ksft_fail);
 	}
@@ -380,14 +405,10 @@ int main(int argc, char *argv[])
 	ksft_cnt.ksft_pass += 6 - (ksft_cnt.ksft_fail - WEXITSTATUS(status));
 	ksft_cnt.ksft_fail = WEXITSTATUS(status);
 
-	if (ns3 == pid && ns2 == 42 && ns1 == 1)
-		ksft_test_result_pass(
-			"PIDs in all namespaces as expected (%d,%d,%d)\n",
-			ns3, ns2, ns1);
-	else
-		ksft_test_result_fail(
-			"PIDs in all namespaces not as expected (%d,%d,%d)\n",
-			ns3, ns2, ns1);
+	ksft_print_msg("Expecting PIDs %d, 42, 1\n", pid);
+	ksft_print_msg("Have PIDs in namespaces: %d, %d, %d\n", ns3, ns2, ns1);
+	ksft_test_result(ns3 == pid && ns2 == 42 && ns1 == 1,
+			 "PIDs in all namespaces as expected\n");
 out:
 	ret = 0;
 

---
base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
change-id: 20231114-kselftest-clone3-set-tid-c0c35111f18f

Best regards,
-- 
Mark Brown <broonie@xxxxxxxxxx>





[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux