Re: [PATCH v4 2/5] zswap: make shrinking memcg-aware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 24, 2023 at 8:17 PM Yosry Ahmed <yosryahmed@xxxxxxxxxx> wrote:
>
> On Tue, Oct 24, 2023 at 1:33 PM Nhat Pham <nphamcs@xxxxxxxxx> wrote:
> >
> > From: Domenico Cerasuolo <cerasuolodomenico@xxxxxxxxx>
> >
> > Currently, we only have a single global LRU for zswap. This makes it
> > impossible to perform worload-specific shrinking - an memcg cannot
> > determine which pages in the pool it owns, and often ends up writing
> > pages from other memcgs. This issue has been previously observed in
> > practice and mitigated by simply disabling memcg-initiated shrinking:
> >
> > https://lore.kernel.org/all/20230530232435.3097106-1-nphamcs@xxxxxxxxx/T/#u
> >
> > This patch fully resolves the issue by replacing the global zswap LRU
> > with memcg- and NUMA-specific LRUs, and modify the reclaim logic:
> >
> > a) When a store attempt hits an memcg limit, it now triggers a
> >    synchronous reclaim attempt that, if successful, allows the new
> >    hotter page to be accepted by zswap.
> > b) If the store attempt instead hits the global zswap limit, it will
> >    trigger an asynchronous reclaim attempt, in which an memcg is
> >    selected for reclaim in a round-robin-like fashion.
> >
> > Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@xxxxxxxxx>
> > Co-developed-by: Nhat Pham <nphamcs@xxxxxxxxx>
> > Signed-off-by: Nhat Pham <nphamcs@xxxxxxxxx>
> > ---
> >  include/linux/memcontrol.h |   5 +
> >  mm/swap.h                  |   3 +-
> >  mm/swap_state.c            |  23 +++--
> >  mm/zswap.c                 | 188 ++++++++++++++++++++++++++-----------
> >  4 files changed, 156 insertions(+), 63 deletions(-)
> >
> > diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
> > index 6edd3ec4d8d5..c1846e57011b 100644
> > --- a/include/linux/memcontrol.h
> > +++ b/include/linux/memcontrol.h
> > @@ -1187,6 +1187,11 @@ static inline struct mem_cgroup *page_memcg_check(struct page *page)
> >         return NULL;
> >  }
> >
> > +static inline struct mem_cgroup *get_mem_cgroup_from_objcg(struct obj_cgroup *objcg)
> > +{
> > +       return NULL;
> > +}
> > +
> >  static inline bool folio_memcg_kmem(struct folio *folio)
> >  {
> >         return false;
> > diff --git a/mm/swap.h b/mm/swap.h
> > index 73c332ee4d91..c0dc73e10e91 100644
> > --- a/mm/swap.h
> > +++ b/mm/swap.h
> > @@ -51,7 +51,8 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
> >                                    struct swap_iocb **plug);
> >  struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
> >                                      struct mempolicy *mpol, pgoff_t ilx,
> > -                                    bool *new_page_allocated);
> > +                                    bool *new_page_allocated,
> > +                                    bool skip_if_exists);
> >  struct page *swap_cluster_readahead(swp_entry_t entry, gfp_t flag,
> >                                     struct mempolicy *mpol, pgoff_t ilx);
> >  struct page *swapin_readahead(swp_entry_t entry, gfp_t flag,
> > diff --git a/mm/swap_state.c b/mm/swap_state.c
> > index 85d9e5806a6a..040639e1c77e 100644
> > --- a/mm/swap_state.c
> > +++ b/mm/swap_state.c
> > @@ -412,7 +412,8 @@ struct folio *filemap_get_incore_folio(struct address_space *mapping,
> >
> >  struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
> >                                      struct mempolicy *mpol, pgoff_t ilx,
> > -                                    bool *new_page_allocated)
> > +                                    bool *new_page_allocated,
> > +                                    bool skip_if_exists)
> >  {
> >         struct swap_info_struct *si;
> >         struct folio *folio;
> > @@ -470,6 +471,16 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
> >                 if (err != -EEXIST)
> >                         goto fail_put_swap;
> >
> > +               /* Protect against a recursive call to __read_swap_cache_async()
>
> nit: insert new line before "Protect", see surrounding comments.
>
> > +                * on the same entry waiting forever here because SWAP_HAS_CACHE
> > +                * is set but the folio is not the swap cache yet. This can
> > +                * happen today if mem_cgroup_swapin_charge_folio() below
> > +                * triggers reclaim through zswap, which may call
> > +                * __read_swap_cache_async() in the writeback path.
> > +                */
> > +               if (skip_if_exists)
> > +                       goto fail_put_swap;
> > +
> >                 /*
> >                  * We might race against __delete_from_swap_cache(), and
> >                  * stumble across a swap_map entry whose SWAP_HAS_CACHE
> [..]
> > +/*********************************
> > +* lru functions
> > +**********************************/
> > +static bool zswap_lru_add(struct list_lru *list_lru, struct zswap_entry *entry)
> > +{
> > +       struct mem_cgroup *memcg = get_mem_cgroup_from_entry(entry);
> > +       int nid = entry_to_nid(entry);
> > +       bool added = list_lru_add(list_lru, &entry->lru, nid, memcg);
> > +
> > +       mem_cgroup_put(memcg);
>
> Still not fond of the get/put pattern but okay..

Actually, Johannes and I took another look to see if we can replace
the memcg reference getting with just rcu_read_lock().

It seems there might be a race between zswap LRU manipulation
and memcg offlining - not just with the rcu_read_lock() idea, but also
with our current implementation!

I'll shoot another email with more details later when I'm sure of it
one way or another...

>
> > +       return added;
> > +}
> > +
> > +static bool zswap_lru_del(struct list_lru *list_lru, struct zswap_entry *entry)
> > +{
> > +       struct mem_cgroup *memcg = get_mem_cgroup_from_entry(entry);
> > +       int nid = entry_to_nid(entry);
> > +       bool removed = list_lru_del(list_lru, &entry->lru, nid, memcg);
> > +
> > +       mem_cgroup_put(memcg);
> > +       return removed;
> > +}
> > +
> >  /*********************************
> >  * rbtree functions
> >  **********************************/
> [..]
> > @@ -652,28 +679,37 @@ static int zswap_reclaim_entry(struct zswap_pool *pool)
> >          */
> >         swpoffset = swp_offset(entry->swpentry);
> >         tree = zswap_trees[swp_type(entry->swpentry)];
> > -       spin_unlock(&pool->lru_lock);
> > +       list_lru_isolate(l, item);
> > +       /*
> > +        * It's safe to drop the lock here because we return either
> > +        * LRU_REMOVED_RETRY or LRU_RETRY.
> > +        */
> > +       spin_unlock(lock);
> >
> >         /* Check for invalidate() race */
> >         spin_lock(&tree->lock);
> > -       if (entry != zswap_rb_search(&tree->rbroot, swpoffset)) {
> > -               ret = -EAGAIN;
> > +       if (entry != zswap_rb_search(&tree->rbroot, swpoffset))
> >                 goto unlock;
> > -       }
> > +
> >         /* Hold a reference to prevent a free during writeback */
> >         zswap_entry_get(entry);
> >         spin_unlock(&tree->lock);
> >
> > -       ret = zswap_writeback_entry(entry, tree);
> > +       writeback_result = zswap_writeback_entry(entry, tree);
> >
> >         spin_lock(&tree->lock);
> > -       if (ret) {
> > -               /* Writeback failed, put entry back on LRU */
> > -               spin_lock(&pool->lru_lock);
> > -               list_move(&entry->lru, &pool->lru);
> > -               spin_unlock(&pool->lru_lock);
> > +       if (writeback_result) {
> > +               zswap_reject_reclaim_fail++;
> > +               memcg = get_mem_cgroup_from_entry(entry);
>
> Can this return NULL? Seems like we don't check the return in most/all places.

I believe so, but memcg experts should fact check me on this.
It's roughly the same pattern as zswap charging/uncharging:

obj_cgroup_uncharge_zswap(entry->objcg, entry->length)
-> getting memcg (under rcu_read_lock())

>
> > +               spin_lock(lock);
> > +               /* we cannot use zswap_lru_add here, because it increments node's lru count */
> > +               list_lru_putback(&entry->pool->list_lru, item, entry_to_nid(entry), memcg);
>
> Perhaps we can move this call with the memcg get/put to a helper like
> add/del? (e.g. zswap_lru_putback)
>
> We would need to move get_mem_cgroup_from_entry() into the lock but I
> think that's okay.

We probably could, but that sounds like extra code for not a lot of gains, no?

>
> > +               spin_unlock(lock);
> > +               mem_cgroup_put(memcg);
> > +               ret = LRU_RETRY;
> >                 goto put_unlock;
> >         }
> > +       zswap_written_back_pages++;
> >
> >         /*
> >          * Writeback started successfully, the page now belongs to the
> > @@ -687,7 +723,34 @@ static int zswap_reclaim_entry(struct zswap_pool *pool)
> >         zswap_entry_put(tree, entry);
> >  unlock:
> >         spin_unlock(&tree->lock);
> > -       return ret ? -EAGAIN : 0;
> > +       spin_lock(lock);
> > +       return ret;
> > +}
> > +
> > +static int shrink_memcg(struct mem_cgroup *memcg)
> > +{
> > +       struct zswap_pool *pool;
> > +       int nid, shrunk = 0;
> > +
> > +       /*
> > +        * Skip zombies because their LRUs are reparented and we would be
> > +        * reclaiming from the parent instead of the dead memcg.
> > +        */
> > +       if (memcg && !mem_cgroup_online(memcg))
> > +               return -ENOENT;
> > +
> > +       pool = zswap_pool_current_get();
> > +       if (!pool)
> > +               return -EINVAL;
> > +
> > +       for_each_node_state(nid, N_NORMAL_MEMORY) {
> > +               unsigned long nr_to_walk = 1;
> > +
> > +               shrunk += list_lru_walk_one(&pool->list_lru, nid, memcg,
> > +                                           &shrink_memcg_cb, NULL, &nr_to_walk);
> > +       }
> > +       zswap_pool_put(pool);
> > +       return shrunk ? 0 : -EAGAIN;
> >  }
> >
> >  static void shrink_worker(struct work_struct *w)
> > @@ -696,15 +759,17 @@ static void shrink_worker(struct work_struct *w)
> >                                                 shrink_work);
> >         int ret, failures = 0;
> >
> > +       /* global reclaim will select cgroup in a round-robin fashion. */
> >         do {
> > -               ret = zswap_reclaim_entry(pool);
> > -               if (ret) {
> > -                       zswap_reject_reclaim_fail++;
> > -                       if (ret != -EAGAIN)
> > -                               break;
> > -                       if (++failures == MAX_RECLAIM_RETRIES)
> > -                               break;
> > -               }
> > +               pool->next_shrink = mem_cgroup_iter(NULL, pool->next_shrink, NULL);
>
> I think this can be a problem. We hold a ref to a memcg here until the
> next time we shrink, which can be a long time IIUC. This can cause the
> memcg to linger as a zombie. I understand it is one memcg per-zswap
> pool, but I am still unsure about it.
>
> MGLRU maintains a memcg LRU for global reclaim that gets properly
> cleaned up when a memcg is going away, so that's one option, although
> complicated.
>
> A second option would be to hold a pointer to the objcg instead, which
> should be less problematic (although we are still holding that objcg
> hostage indefinitely). The problem here is that if the objcg gets
> reparented, next time we will start at the parent of the memcg we
> stopped at last time, which tbh doesn't sound bad at all to me.
>
> A third option would be to flag the memcg such that when it is getting
> offlined we can call into zswap to reset pool->next_shrink (or move it
> to the parent) and drop the ref. Although synchronization can get
> hairy when racing with offlining.
>
> Not sure what's the right solution, but I prefer we don't hold any
> memcgs hostages indefinitely. I also think if we end up using
> mem_cgroup_iter() then there should be a mem_cgroup_iter_break()
> somewhere if/when breaking the iteration.
>

I'm not sure if this is that big of a problem in the first place, but
if it is, doing something similar to MGLRU is probably the cleanest:
when the memcg is freed, trigger the zswap_exit_memcg() callback,
which will loop through all the zswap pools and update pool->next_shrink
where appropriate.

Note that we only have one pool per (compression algorithm x allocator)
combinations, so there cannot be that many pools, correct?

Johannes suggests this idea to me (my apologies if I butcher it)
during one of our conversations. That sounds relatively easy IIUC.

> > +
> > +               ret = shrink_memcg(pool->next_shrink);
> > +
> > +               if (ret == -EINVAL)
> > +                       break;
> > +               if (ret && ++failures == MAX_RECLAIM_RETRIES)
> > +                       break;
> > +
> >                 cond_resched();
> >         } while (!zswap_can_accept());
> >         zswap_pool_put(pool);
> [..]
> > @@ -1233,15 +1301,15 @@ bool zswap_store(struct folio *folio)
> >                 zswap_invalidate_entry(tree, dupentry);
> >         }
> >         spin_unlock(&tree->lock);
> > -
> > -       /*
> > -        * XXX: zswap reclaim does not work with cgroups yet. Without a
> > -        * cgroup-aware entry LRU, we will push out entries system-wide based on
> > -        * local cgroup limits.
> > -        */
> >         objcg = get_obj_cgroup_from_folio(folio);
> > -       if (objcg && !obj_cgroup_may_zswap(objcg))
> > -               goto reject;
> > +       if (objcg && !obj_cgroup_may_zswap(objcg)) {
> > +               memcg = get_mem_cgroup_from_objcg(objcg);
> > +               if (shrink_memcg(memcg)) {
> > +                       mem_cgroup_put(memcg);
> > +                       goto reject;
> > +               }
> > +               mem_cgroup_put(memcg);
>
> Here we choose to replicate mem_cgroup_put().
>
> > +       }
> >
> >         /* reclaim space if needed */
> >         if (zswap_is_full()) {
> > @@ -1258,7 +1326,7 @@ bool zswap_store(struct folio *folio)
> >         }
> >
> >         /* allocate entry */
> > -       entry = zswap_entry_cache_alloc(GFP_KERNEL);
> > +       entry = zswap_entry_cache_alloc(GFP_KERNEL, page_to_nid(page));
> >         if (!entry) {
> >                 zswap_reject_kmemcache_fail++;
> >                 goto reject;
> > @@ -1285,6 +1353,15 @@ bool zswap_store(struct folio *folio)
> >         if (!entry->pool)
> >                 goto freepage;
> >
> > +       if (objcg) {
> > +               memcg = get_mem_cgroup_from_objcg(objcg);
> > +               lru_alloc_ret = memcg_list_lru_alloc(memcg, &entry->pool->list_lru, GFP_KERNEL);
> > +               mem_cgroup_put(memcg);
> > +
> > +               if (lru_alloc_ret)
> > +                       goto put_pool;
> > +       }
>
> Yet here we choose to have a single mem_cgroup_put() and stash the
> output in a variable.
>
> Consistency would be nice.

No strong opinions here, but yeah we should fix it to make it
consistent.

>
> > +
> >         /* compress */
> >         acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx);
> >
> > @@ -1361,9 +1438,8 @@ bool zswap_store(struct folio *folio)
> >                 zswap_invalidate_entry(tree, dupentry);
> >         }
> >         if (entry->length) {
> > -               spin_lock(&entry->pool->lru_lock);
> > -               list_add(&entry->lru, &entry->pool->lru);
> > -               spin_unlock(&entry->pool->lru_lock);
> > +               INIT_LIST_HEAD(&entry->lru);
> > +               zswap_lru_add(&entry->pool->list_lru, entry);
> >         }
> >         spin_unlock(&tree->lock);
> >
> > @@ -1376,6 +1452,7 @@ bool zswap_store(struct folio *folio)
> >
> >  put_dstmem:
> >         mutex_unlock(acomp_ctx->mutex);
> > +put_pool:
> >         zswap_pool_put(entry->pool);
> >  freepage:
> >         zswap_entry_cache_free(entry);
> > @@ -1470,9 +1547,8 @@ bool zswap_load(struct folio *folio)
> >                 zswap_invalidate_entry(tree, entry);
> >                 folio_mark_dirty(folio);
> >         } else if (entry->length) {
> > -               spin_lock(&entry->pool->lru_lock);
> > -               list_move(&entry->lru, &entry->pool->lru);
> > -               spin_unlock(&entry->pool->lru_lock);
> > +               zswap_lru_del(&entry->pool->list_lru, entry);
> > +               zswap_lru_add(&entry->pool->list_lru, entry);
>
> Can we use list_move_tail() here? (perhaps wrapped in a helper if needed).

Maybe zswap_lru_move_tail()? :)

FWIW, list_lru() interface does not have a move_tail function, (weird, I know).
So this seems to be the common pattern for LRU rotation with list_lru.

>
> >         }
> >         zswap_entry_put(tree, entry);
> >         spin_unlock(&tree->lock);
> > --
> > 2.34.1




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux