[PATCH V1 4/6] cpufreq: amd-pstate: Update AMD Pstate Preferred Core ranking dynamically

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Preferred core rankings can be changed dynamically by the
platform based on the workload and platform conditions and
accounting for thermals and aging.
When this occurs, cpu priority need to be set.

Signed-off-by: Meng Li <li.meng@xxxxxxx>
---
 drivers/cpufreq/amd-pstate.c | 32 ++++++++++++++++++++++++++++++++
 include/linux/amd-pstate.h   |  1 +
 2 files changed, 33 insertions(+)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index e919b3f4ab18..ba10aa971dcb 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -320,6 +320,7 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
 	WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1));
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1));
 	WRITE_ONCE(cpudata->lowest_perf, AMD_CPPC_LOWEST_PERF(cap1));
+	WRITE_ONCE(cpudata->prefcore_highest_perf, AMD_CPPC_HIGHEST_PERF(cap1));
 
 	return 0;
 }
@@ -341,6 +342,7 @@ static int cppc_init_perf(struct amd_cpudata *cpudata)
 	WRITE_ONCE(cpudata->lowest_nonlinear_perf,
 		   cppc_perf.lowest_nonlinear_perf);
 	WRITE_ONCE(cpudata->lowest_perf, cppc_perf.lowest_perf);
+	WRITE_ONCE(cpudata->prefcore_highest_perf, cppc_perf.highest_perf);
 
 	if (cppc_state == AMD_PSTATE_ACTIVE)
 		return 0;
@@ -743,6 +745,34 @@ static void amd_pstate_init_prefcore(void)
 	schedule_work(&sched_prefcore_work);
 }
 
+static void amd_pstate_update_highest_perf(unsigned int cpu)
+{
+	struct cpufreq_policy *policy;
+	struct amd_cpudata *cpudata;
+	u32 prev_high = 0, cur_high = 0;
+	u64 highest_perf;
+	int ret;
+
+	if (!prefcore_enabled)
+		return;
+
+	ret = amd_pstate_get_highest_perf(cpu, &highest_perf);
+	if (ret)
+		return;
+
+	policy = cpufreq_cpu_get(cpu);
+	cpudata = policy->driver_data;
+	cur_high = highest_perf;
+	prev_high = READ_ONCE(cpudata->prefcore_highest_perf);
+
+	if (prev_high != cur_high) {
+		WRITE_ONCE(cpudata->prefcore_highest_perf, cur_high);
+		sched_set_itmt_core_prio(cur_high, cpu);
+	}
+
+	cpufreq_cpu_put(policy);
+}
+
 /*
  * Check if AMD Pstate Preferred core feature is supported and enabled
  * 1) no_prefcore is used to enable or disable AMD Pstate Preferred Core
@@ -1497,6 +1527,7 @@ static struct cpufreq_driver amd_pstate_driver = {
 	.suspend	= amd_pstate_cpu_suspend,
 	.resume		= amd_pstate_cpu_resume,
 	.set_boost	= amd_pstate_set_boost,
+	.update_highest_perf	= amd_pstate_update_highest_perf,
 	.name		= "amd-pstate",
 	.attr		= amd_pstate_attr,
 };
@@ -1511,6 +1542,7 @@ static struct cpufreq_driver amd_pstate_epp_driver = {
 	.online		= amd_pstate_epp_cpu_online,
 	.suspend	= amd_pstate_epp_suspend,
 	.resume		= amd_pstate_epp_resume,
+	.update_highest_perf	= amd_pstate_update_highest_perf,
 	.name		= "amd-pstate-epp",
 	.attr		= amd_pstate_epp_attr,
 };
diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h
index 446394f84606..fa86bc953d3e 100644
--- a/include/linux/amd-pstate.h
+++ b/include/linux/amd-pstate.h
@@ -70,6 +70,7 @@ struct amd_cpudata {
 	u32	nominal_perf;
 	u32	lowest_nonlinear_perf;
 	u32	lowest_perf;
+	u32     prefcore_highest_perf;
 
 	u32	max_freq;
 	u32	min_freq;
-- 
2.34.1




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux