Re: [PATCH 1/2] x86/tsc: Add new BPF helper call bpf_rdtsc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 3, 2023 at 3:58 AM Tero Kristo <tero.kristo@xxxxxxxxxxxxxxx> wrote:
>
> Currently the raw TSC counter can be read within kernel via rdtsc_ordered()
> and friends, and additionally even userspace has access to it via the
> RDTSC assembly instruction. BPF programs on the other hand don't have
> direct access to the TSC counter, but alternatively must go through the
> performance subsystem (bpf_perf_event_read), which only provides relative
> value compared to the start point of the program, and is also much slower
> than the direct read. Add a new BPF helper definition for bpf_rdtsc() which
> can be used for any accurate profiling needs.
>
> A use-case for the new API is for example wakeup latency tracing via
> eBPF on Intel architecture, where it is extremely beneficial to be able
> to get raw TSC timestamps and compare these directly to the value
> programmed to the MSR_IA32_TSC_DEADLINE register. This way a direct
> latency value from the hardware interrupt to the execution of the
> interrupt handler can be calculated. Having the functionality within
> eBPF also has added benefits of allowing to filter any other relevant
> data like C-state residency values, and also to drop any irrelevant
> data points directly in the kernel context, without passing all the
> data to userspace for post-processing.
>
> Signed-off-by: Tero Kristo <tero.kristo@xxxxxxxxxxxxxxx>
> ---
>  arch/x86/include/asm/msr.h |  1 +
>  arch/x86/kernel/tsc.c      | 23 +++++++++++++++++++++++
>  2 files changed, 24 insertions(+)
>
> diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
> index 65ec1965cd28..3dde673cb563 100644
> --- a/arch/x86/include/asm/msr.h
> +++ b/arch/x86/include/asm/msr.h
> @@ -309,6 +309,7 @@ struct msr *msrs_alloc(void);
>  void msrs_free(struct msr *msrs);
>  int msr_set_bit(u32 msr, u8 bit);
>  int msr_clear_bit(u32 msr, u8 bit);
> +u64 bpf_rdtsc(void);
>
>  #ifdef CONFIG_SMP
>  int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
> diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
> index 344698852146..ded857abef81 100644
> --- a/arch/x86/kernel/tsc.c
> +++ b/arch/x86/kernel/tsc.c
> @@ -15,6 +15,8 @@
>  #include <linux/timex.h>
>  #include <linux/static_key.h>
>  #include <linux/static_call.h>
> +#include <linux/btf.h>
> +#include <linux/btf_ids.h>
>
>  #include <asm/hpet.h>
>  #include <asm/timer.h>
> @@ -29,6 +31,7 @@
>  #include <asm/intel-family.h>
>  #include <asm/i8259.h>
>  #include <asm/uv/uv.h>
> +#include <asm/tlbflush.h>
>
>  unsigned int __read_mostly cpu_khz;    /* TSC clocks / usec, not used here */
>  EXPORT_SYMBOL(cpu_khz);
> @@ -1551,6 +1554,24 @@ void __init tsc_early_init(void)
>         tsc_enable_sched_clock();
>  }
>
> +u64 bpf_rdtsc(void)
> +{
> +       /* Check if Time Stamp is enabled only in ring 0 */
> +       if (cr4_read_shadow() & X86_CR4_TSD)
> +               return 0;

Why check this? It's always enabled in the kernel, no?

> +
> +       return rdtsc_ordered();

Why _ordered? Why not just rdtsc ?
Especially since you want to trace latency. Extra lfence will ruin
the measurements.




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux