On 5/30/23 3:26 PM, Enric Balletbo i Serra wrote:
> This provides a basic infrastructure for the creation of tests for the evdev
> interface. Most of this code is adapted from the libevdev wrapper library. While
> most of evdev ioctls are covered and tested using libevdev tests there are some
> evdev ioctls that aren't because are not supported (and will not be supported)
> by libevdev [1]. So, adding, at least those tests, would make sense.
>
> The test creates an uinput device (and an evdev device) so you can
> call the wanted ioctl from userspace. So, to run those tests you need
> to have support for uinput and evdev as well.
>
> [1] For example, libevdev doesn't support setting EV_REP because it's inherently
> racy - one libevdev context to set those values via the ioctl would cause all
> other libevdev contexts on the same device to be out of sync. Since we do not
> get notifications when the values changed, libevdev's buffered values for EV_REP
> will remain whatever they were initially.
>
> Signed-off-by: Enric Balletbo i Serra <eballetbo@xxxxxxxxxx>
Acked-by: Muhammad Usama Anjum <usama.anjum@xxxxxxxxxxxxx>
> ---
> Test output:
>
> TAP version 13
> 1..3
> # Starting 3 tests from 1 test cases.
> # RUN global.eviocgname_get_device_name ...
> # OK global.eviocgname_get_device_name
> ok 1 global.eviocgname_get_device_name
> # RUN global.eviocgrep_get_repeat_settings ...
> # OK global.eviocgrep_get_repeat_settings
> ok 2 global.eviocgrep_get_repeat_settings
> # RUN global.eviocsrep_set_repeat_settings ...
> # OK global.eviocsrep_set_repeat_settings
> ok 3 global.eviocsrep_set_repeat_settings
> # PASSED: 3 / 3 tests passed.
> # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
>
> tools/testing/selftests/Makefile | 1 +
> tools/testing/selftests/input/.gitignore | 2 +
> tools/testing/selftests/input/Makefile | 5 +
> tools/testing/selftests/input/config | 3 +
> tools/testing/selftests/input/evioc-test.c | 259 +++++++++++++++++++++
> 5 files changed, 270 insertions(+)
> create mode 100644 tools/testing/selftests/input/.gitignore
> create mode 100644 tools/testing/selftests/input/Makefile
> create mode 100644 tools/testing/selftests/input/config
> create mode 100644 tools/testing/selftests/input/evioc-test.c
>
> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
> index 90a62cf75008..29fc77168aa7 100644
> --- a/tools/testing/selftests/Makefile
> +++ b/tools/testing/selftests/Makefile
> @@ -28,6 +28,7 @@ TARGETS += futex
> TARGETS += gpio
> TARGETS += hid
> TARGETS += intel_pstate
> +TARGETS += input
> TARGETS += iommu
> TARGETS += ipc
> TARGETS += ir
> diff --git a/tools/testing/selftests/input/.gitignore b/tools/testing/selftests/input/.gitignore
> new file mode 100644
> index 000000000000..37f5dff3255b
> --- /dev/null
> +++ b/tools/testing/selftests/input/.gitignore
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +evioc-test
> diff --git a/tools/testing/selftests/input/Makefile b/tools/testing/selftests/input/Makefile
> new file mode 100644
> index 000000000000..031729be0628
> --- /dev/null
> +++ b/tools/testing/selftests/input/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0
> +CFLAGS += -D_GNU_SOURCE -std=gnu99 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES)
> +
> +TEST_GEN_PROGS := evioc-test
> +include ../lib.mk
> diff --git a/tools/testing/selftests/input/config b/tools/testing/selftests/input/config
> new file mode 100644
> index 000000000000..b7512f3e6d8d
> --- /dev/null
> +++ b/tools/testing/selftests/input/config
> @@ -0,0 +1,3 @@
> +CONFIG_INPUT=y
> +CONFIG_INPUT_EVDEV=y
> +CONFIG_INPUT_UINPUT=m
> diff --git a/tools/testing/selftests/input/evioc-test.c b/tools/testing/selftests/input/evioc-test.c
> new file mode 100644
> index 000000000000..1b951d41ee47
> --- /dev/null
> +++ b/tools/testing/selftests/input/evioc-test.c
> @@ -0,0 +1,259 @@
> +// SPDX-License-Identifier: MIT
> +/*
> + * Copyright © 2023 Red Hat, Inc.
> + *
> + * Part of the code in this file is inspired and copied from the libevdev wrapper library
> + * for evdev devices written by Peter Hutterer.
> + */
> +
> +#include <dirent.h>
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <linux/uinput.h>
> +#include <poll.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <sys/stat.h>
> +#include <time.h>
> +#include <unistd.h>
> +
> +#include "../kselftest_harness.h"
> +
> +#define TEST_DEVICE_NAME "selftest input device"
> +
> +struct selftest_uinput {
> + int uinput_fd; /** file descriptor to uinput */
> + int evdev_fd; /** file descriptor to evdev */
> + char *name; /** device name */
> + char *syspath; /** /sys path */
> + char *devnode; /** device node */
> +};
> +
> +static int is_event_device(const struct dirent *dent)
> +{
> + return strncmp("event", dent->d_name, 5) == 0;
> +}
> +
> +static char *fetch_device_node(const char *path)
> +{
> + struct dirent **namelist;
> + char *devnode = NULL;
> + int ndev, i;
> +
> + ndev = scandir(path, &namelist, is_event_device, alphasort);
> + if (ndev <= 0)
> + return NULL;
> +
> + /* ndev should only ever be 1 */
> +
> + for (i = 0; i < ndev; i++) {
> + if (!devnode && asprintf(&devnode, "/dev/input/%s",
> + namelist[i]->d_name) == -1)
> + devnode = NULL;
> + free(namelist[i]);
> + }
> +
> + free(namelist);
> +
> + return devnode;
> +}
> +
> +static int fetch_syspath_and_devnode(struct selftest_uinput *uidev)
> +{
> +#define SYS_INPUT_DIR "/sys/devices/virtual/input/"
> + char buf[sizeof(SYS_INPUT_DIR) + 64] = SYS_INPUT_DIR;
> + int rc;
> +
> + rc = ioctl(uidev->uinput_fd,
> + UI_GET_SYSNAME(sizeof(buf) - strlen(SYS_INPUT_DIR)),
> + &buf[strlen(SYS_INPUT_DIR)]);
> + if (rc == -1) {
> + fprintf(stderr, "cannot get the sysfs name of the uinput device (%d)\n", rc);
> + return rc;
> + }
> +
> + uidev->syspath = strdup(buf);
> + uidev->devnode = fetch_device_node(buf);
> +
> + return uidev->devnode ? 0 : -1;
> +#undef SYS_INPUT_DIR
> +}
> +
> +static void selftest_uinput_destroy(struct selftest_uinput *uidev)
> +{
> + if (!uidev)
> + return;
> +
> + if (uidev->uinput_fd >= 0)
> + ioctl(uidev->uinput_fd, UI_DEV_DESTROY, NULL);
> +
> + close(uidev->evdev_fd);
> + close(uidev->uinput_fd);
> +
> + free(uidev->syspath);
> + free(uidev->devnode);
> + free(uidev->name);
> + free(uidev);
> +}
> +
> +static int selftest_uinput_create_device(struct selftest_uinput **uidev, ...)
> +{
> + struct selftest_uinput *new_device;
> + struct uinput_setup setup;
> + va_list args;
> + int rc, fd;
> + int type;
> +
> + new_device = calloc(1, sizeof(struct selftest_uinput));
> + if (!new_device)
> + return -ENOMEM;
> +
> + memset(&setup, 0, sizeof(setup));
> + strncpy(setup.name, TEST_DEVICE_NAME, UINPUT_MAX_NAME_SIZE - 1);
> + setup.id.vendor = 0x1234; /* sample vendor */
> + setup.id.product = 0x5678; /* sample product */
> + setup.id.bustype = BUS_USB;
> +
> + fd = open("/dev/uinput", O_WRONLY | O_NONBLOCK);
> + if (fd < 0) {
> + fprintf(stderr, "cannot open uinput (%d): %m\n", errno);
> + goto error;
> + }
> +
> + va_start(args, uidev);
> + rc = 0;
> + do {
> + type = va_arg(args, int);
> + if (type == -1)
> + break;
> + rc = ioctl(fd, UI_SET_EVBIT, type);
> + } while (rc == 0);
> + va_end(args);
> +
> + rc = ioctl(fd, UI_DEV_SETUP, &setup);
> + if (rc == -1)
> + goto error;
> +
> + rc = ioctl(fd, UI_DEV_CREATE, NULL);
> + if (rc == -1)
> + goto error;
> +
> + new_device->name = strdup(TEST_DEVICE_NAME);
> + new_device->uinput_fd = fd;
> +
> + if (fetch_syspath_and_devnode(new_device) == -1) {
> + fprintf(stderr, "unable to fetch syspath or device node.\n");
> + errno = ENODEV;
> + goto error;
> + }
> +
> + fd = open(new_device->devnode, O_RDONLY);
> + if (fd < 0) {
> + fprintf(stderr, "cannot open uinput (%d): %m\n", errno);
> + goto error;
> + }
> + new_device->evdev_fd = fd;
> +
> + *uidev = new_device;
> +
> + return 0;
> +
> +error:
> + rc = -errno;
> + selftest_uinput_destroy(new_device);
> + return rc;
> +}
> +
> +TEST(eviocgname_get_device_name)
> +{
> + struct selftest_uinput *uidev;
> + char buf[256];
> + int rc;
> +
> + rc = selftest_uinput_create_device(&uidev);
> + ASSERT_EQ(0, rc);
> + ASSERT_NE(NULL, uidev);
> +
> + memset(buf, 0, sizeof(buf));
> + /* ioctl to get the name */
> + rc = ioctl(uidev->evdev_fd, EVIOCGNAME(sizeof(buf) - 1), buf);
> + ASSERT_GE(rc, 0);
> + ASSERT_STREQ(TEST_DEVICE_NAME, buf);
> +
> + selftest_uinput_destroy(uidev);
> +}
> +
> +TEST(eviocgrep_get_repeat_settings)
> +{
> + struct selftest_uinput *uidev;
> + int rep_values[2];
> + int rc;
> +
> + memset(rep_values, 0, sizeof(rep_values));
> +
> + rc = selftest_uinput_create_device(&uidev);
> + ASSERT_EQ(0, rc);
> + ASSERT_NE(NULL, uidev);
> +
> + /* ioctl to get the repeat rates values */
> + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values);
> + /* should fail because EV_REP is not set */
> + ASSERT_EQ(-1, rc);
> +
> + selftest_uinput_destroy(uidev);
> +
> + rc = selftest_uinput_create_device(&uidev, EV_REP, -1);
> + ASSERT_EQ(0, rc);
> + ASSERT_NE(NULL, uidev);
> +
> + /* ioctl to get the repeat rates values */
> + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values);
> + ASSERT_EQ(0, rc);
> + /* should get the default delay and period values set by the kernel */
> + ASSERT_EQ(rep_values[0], 250);
> + ASSERT_EQ(rep_values[1], 33);
> +
> + selftest_uinput_destroy(uidev);
> +}
> +
> +TEST(eviocsrep_set_repeat_settings)
> +{
> + struct selftest_uinput *uidev;
> + int rep_values[2];
> + int rc;
> +
> + memset(rep_values, 0, sizeof(rep_values));
> +
> + rc = selftest_uinput_create_device(&uidev);
> + ASSERT_EQ(0, rc);
> + ASSERT_NE(NULL, uidev);
> +
> + /* ioctl to set the repeat rates values */
> + rc = ioctl(uidev->evdev_fd, EVIOCSREP, rep_values);
> + /* should fail because EV_REP is not set */
> + ASSERT_EQ(-1, rc);
> +
> + selftest_uinput_destroy(uidev);
> +
> + rc = selftest_uinput_create_device(&uidev, EV_REP, -1);
> + ASSERT_EQ(0, rc);
> + ASSERT_NE(NULL, uidev);
> +
> + /* ioctl to set the repeat rates values */
> + rep_values[0] = 500;
> + rep_values[1] = 200;
> + rc = ioctl(uidev->evdev_fd, EVIOCSREP, rep_values);
> + ASSERT_EQ(0, rc);
> +
> + /* ioctl to get the repeat rates values */
> + rc = ioctl(uidev->evdev_fd, EVIOCGREP, rep_values);
> + ASSERT_EQ(0, rc);
> + /* should get the delay and period values set previously */
> + ASSERT_EQ(rep_values[0], 500);
> + ASSERT_EQ(rep_values[1], 200);
> +
> + selftest_uinput_destroy(uidev);
> +}
> +
> +TEST_HARNESS_MAIN
--
BR,
Muhammad Usama Anjum
