From: Zhang Yunkai (CGEL ZTE) <zhang.yunkai@xxxxxxxxxx>
The verification function of this test case is likely to encounter the
following error, which may confuse users. The problem is easily
reproducible in the latest kernel.
Environment A, the sender:
bash# udpgso_bench_tx -l 4 -4 -D "$IP_B"
udpgso_bench_tx: write: Connection refused
Environment B, the receiver:
bash# udpgso_bench_rx -4 -G -S 1472 -v
udpgso_bench_rx: data[1472]: len 17664, a(97) != q(113)
If the packet is captured, you will see:
Environment A, the sender:
bash# tcpdump -i eth0 host "$IP_B" &
IP $IP_A.41025 > $IP_B.8000: UDP, length 1472
IP $IP_A.41025 > $IP_B.8000: UDP, length 1472
IP $IP_B > $IP_A: ICMP $IP_B udp port 8000 unreachable, length 556
Environment B, the receiver:
bash# tcpdump -i eth0 host "$IP_B" &
IP $IP_A.41025 > $IP_B.8000: UDP, length 7360
IP $IP_A.41025 > $IP_B.8000: UDP, length 14720
IP $IP_B > $IP_A: ICMP $IP_B udp port 8000 unreachable, length 556
In one test, the verification data is printed as follows:
abcd...xyz | 1...
.. |
abcd...xyz |
abcd...opabcd...xyz | ...1472... Not xyzabcd, messages are merged
.. |
The issue is that the test on receive for expected payload pattern
{AB..Z}+ fail for GRO packets if segment payload does not end on a Z.
The issue still exists when using the GRO with -G, but not using the -S
to obtain gsosize. Therefore, a print has been added to remind users.
Changes in v3:
- Simplify description and adjust judgment order.
Changes in v2:
- Fix confusing descriptions.
Signed-off-by: Zhang Yunkai (CGEL ZTE) <zhang.yunkai@xxxxxxxxxx>
Reviewed-by: Xu Xin (CGEL ZTE) <xu.xin16@xxxxxxxxxx>
Reviewed-by: Yang Yang (CGEL ZTE) <yang.yang29@xxxxxxxxxx>
Cc: Xuexin Jiang (CGEL ZTE) <jiang.xuexin@xxxxxxxxxx>
---
tools/testing/selftests/net/udpgso_bench_rx.c | 34 +++++++++++++++++++++++----
1 file changed, 29 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/net/udpgso_bench_rx.c b/tools/testing/selftests/net/udpgso_bench_rx.c
index f35a924d4a30..3ad18cbc570d 100644
--- a/tools/testing/selftests/net/udpgso_bench_rx.c
+++ b/tools/testing/selftests/net/udpgso_bench_rx.c
@@ -189,26 +189,45 @@ static char sanitized_char(char val)
return (val >= 'a' && val <= 'z') ? val : '.';
}
-static void do_verify_udp(const char *data, int len)
+static void do_verify_udp(const char *data, int start, int len)
{
- char cur = data[0];
+ char cur = data[start];
int i;
/* verify contents */
if (cur < 'a' || cur > 'z')
error(1, 0, "data initial byte out of range");
- for (i = 1; i < len; i++) {
+ for (i = start + 1; i < start + len; i++) {
if (cur == 'z')
cur = 'a';
else
cur++;
- if (data[i] != cur)
+ if (data[i] != cur) {
+ if (cfg_gro_segment && !cfg_expected_gso_size)
+ error(0, 0, "Use -S to obtain gsosize to guide "
+ "splitting and verification.");
+
error(1, 0, "data[%d]: len %d, %c(%hhu) != %c(%hhu)\n",
i, len,
sanitized_char(data[i]), data[i],
sanitized_char(cur), cur);
+ }
+ }
+}
+
+static void do_verify_udp_gro(const char *data, int len, int segment_size)
+{
+ int start = 0;
+
+ while (len - start > 0) {
+ if (len - start > segment_size)
+ do_verify_udp(data, start, segment_size);
+ else
+ do_verify_udp(data, start, len - start);
+
+ start += segment_size;
}
}
@@ -268,7 +287,12 @@ static void do_flush_udp(int fd)
if (ret == 0)
error(1, errno, "recv: 0 byte datagram\n");
- do_verify_udp(rbuf, ret);
+ if (!cfg_gro_segment)
+ do_verify_udp(rbuf, 0, ret);
+ else if (gso_size > 0)
+ do_verify_udp_gro(rbuf, ret, gso_size);
+ else
+ do_verify_udp_gro(rbuf, ret, ret);
}
if (cfg_expected_gso_size && cfg_expected_gso_size != gso_size)
error(1, 0, "recv: bad gso size, got %d, expected %d "
--
2.15.2
