Add recognition of the test name line ("# Subtest: <name>") to the KTAP v2
spec.
The purpose of this line is to declare the name of a test before its
results. This functionality is especially useful when trying to parse test
results incrementally and when interpretting results after a crash.
This line is already compliant with KTAP v1 as it is interpretted as a
diagnostic line by parsers. Additionally, the line is currently used by
KUnit tests and was derived from the TAP 14 spec:
https://testanything.org/tap-version-14-specification.html.
Recognition of this line would create an accepted way for different test
frameworks to declare the name of a test before its results.
The proposed location for this line is between the version line and the
test plan line. This location ensures that the line would not be
accidentally parsed as a subtest's diagnostic lines. Note this proposed
location would be a slight differentiation from KTAP v1.
Example of test name line:
KTAP version 2
# Subtest: main_test
1..1
KTAP version 2
# Subtest: sub_test
1..2
ok 1 test_1
ok 2 test_2
ok 1 sub_test
Here is a link to a version of the KUnit parser that is able to parse the
test name line for KTAP version 2. Note this includes a test name line for
the main level of KTAP.
Link: https://kunit-review.googlesource.com/c/linux/+/5709
Signed-off-by: Rae Moar <rmoar@xxxxxxxxxx>
---
This is a RFC. I would like to know what people think and use this as a
platform for discussion on KTAP v2.
Note: this patch is based on Frank's ktap_spec_version_2 branch.
Documentation/dev-tools/ktap.rst | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/Documentation/dev-tools/ktap.rst b/Documentation/dev-tools/ktap.rst
index ff77f4aaa6ef..9c7ed66d9f77 100644
--- a/Documentation/dev-tools/ktap.rst
+++ b/Documentation/dev-tools/ktap.rst
@@ -28,8 +28,7 @@ KTAP output is built from four different types of lines:
In general, valid KTAP output should also form valid TAP output, but some
information, in particular nested test results, may be lost. Also note that
there is a stagnant draft specification for TAP14, KTAP diverges from this in
-a couple of places (notably the "Subtest" header), which are described where
-relevant later in this document.
+a couple of places, which are described where relevant later in this document.
Version lines
-------------
@@ -44,8 +43,8 @@ For example:
- "TAP version 14"
Note that, in KTAP, subtests also begin with a version line, which denotes the
-start of the nested test results. This differs from TAP14, which uses a
-separate "Subtest" line.
+start of the nested test results. This differs from TAP14, which uses only a
+"Subtest" line.
While, going forward, "KTAP version 2" should be used by compliant tests, it
is expected that most parsers and other tooling will accept the other versions
@@ -166,6 +165,12 @@ even if they do not start with a "#": this is to capture any other useful
kernel output which may help debug the test. It is nevertheless recommended
that tests always prefix any diagnostic output they have with a "#" character.
+One recognized diagnostic line is the "# Subtest: <name>" line. This line
+is used to declare the name of a test before subtest results are printed. This
+is helpful for parsing and for providing context during crashes. As a rule,
+this line is placed after the version line and before the plan line. Note
+this line can be used for the main test, as well as subtests.
+
Unknown lines
-------------
@@ -206,6 +211,7 @@ An example of a test with two nested subtests:
KTAP version 2
1..1
KTAP version 2
+ # Subtest: example
1..2
ok 1 test_1
not ok 2 test_2
@@ -219,6 +225,7 @@ An example format with multiple levels of nested testing:
KTAP version 2
1..2
KTAP version 2
+ # Subtest: example_test_1
1..2
KTAP version 2
1..2
@@ -245,7 +252,7 @@ allows an arbitrary number of tests to be nested no yes
The TAP14 specification does permit nested tests, but instead of using another
nested version line, uses a line of the form
-"Subtest: <name>" where <name> is the name of the parent test.
+"Subtest: <name>" where <name> is the name of the parent test as discussed above.
Example KTAP output
--------------------
@@ -254,6 +261,7 @@ Example KTAP output
KTAP version 2
1..1
KTAP version 2
+ # Subtest: main_test
1..3
KTAP version 2
1..1
@@ -266,6 +274,7 @@ Example KTAP output
ok 2 test_2
ok 2 example_test_2
KTAP version 2
+ # Subtest: example_test_3
1..3
ok 1 test_1
# test_2: FAIL
base-commit: 906f02e42adfbd5ae70d328ee71656ecb602aaf5
--
2.40.0.rc1.284.g88254d51c5-goog
