Re: [PATCH v6 1/2] selftests: vm: bring common functions to a new file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/24/22 3:35 AM, Nico Pache wrote:
> On Wed, Sep 21, 2022 at 5:06 AM Muhammad Usama Anjum
> <usama.anjum@xxxxxxxxxxxxx> wrote:
>>
>> On 9/9/22 8:06 AM, Nico Pache wrote:
>>>
>>>
>>> On 4/20/22 04:40, Muhammad Usama Anjum wrote:
>>>> Bring common functions to a new file while keeping code as much same as
>>>> possible. These functions can be used in the new tests. This helps in
>>>> avoiding code duplication.
>>>
>>> This commit breaks a pattern in the way tests are run in the current scheme.
>>> Before this commit the only executable (or TEST_PROGS) that was executed was
>>> run_vmselftests.sh. Now both madv_populate and split_huge_page_test are being
>>> run as well.
>>>>
>>>> Signed-off-by: Muhammad Usama Anjum <usama.anjum@xxxxxxxxxxxxx>
>>>> ---
>>>> Changes in V6:
>>>> - Correct header files inclusion
>>>>
>>>> Changes in V5:
>>>> Keep moved code as same as possible
>>>> - Updated macros names
>>>> - Removed macro used to show bit number of dirty bit, added a comment
>>>>   instead
>>>> - Corrected indentation
>>>> ---
>>>>  tools/testing/selftests/vm/Makefile           |   7 +-
>>>>  tools/testing/selftests/vm/madv_populate.c    |  34 +-----
>>>>  .../selftests/vm/split_huge_page_test.c       |  79 +------------
>>>>  tools/testing/selftests/vm/vm_util.c          | 108 ++++++++++++++++++
>>>>  tools/testing/selftests/vm/vm_util.h          |   9 ++
>>>>  5 files changed, 124 insertions(+), 113 deletions(-)
>>>>  create mode 100644 tools/testing/selftests/vm/vm_util.c
>>>>  create mode 100644 tools/testing/selftests/vm/vm_util.h
>>>>
>>>> diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
>>>> index 5e43f072f5b76..4e68edb26d6b6 100644
>>>> --- a/tools/testing/selftests/vm/Makefile
>>>> +++ b/tools/testing/selftests/vm/Makefile
>>>> @@ -34,7 +34,7 @@ TEST_GEN_FILES += hugepage-mremap
>>>>  TEST_GEN_FILES += hugepage-shm
>>>>  TEST_GEN_FILES += hugepage-vmemmap
>>>>  TEST_GEN_FILES += khugepaged
>>>> -TEST_GEN_FILES += madv_populate
>>>> +TEST_GEN_PROGS = madv_populate
>>> madv_populate is already being run in run_vmselftests.sh
>>>>  TEST_GEN_FILES += map_fixed_noreplace
>>>>  TEST_GEN_FILES += map_hugetlb
>>>>  TEST_GEN_FILES += map_populate
>>>> @@ -47,7 +47,7 @@ TEST_GEN_FILES += on-fault-limit
>>>>  TEST_GEN_FILES += thuge-gen
>>>>  TEST_GEN_FILES += transhuge-stress
>>>>  TEST_GEN_FILES += userfaultfd
>>>> -TEST_GEN_FILES += split_huge_page_test
>>>> +TEST_GEN_PROGS += split_huge_page_test
>>>>  TEST_GEN_FILES += ksm_tests
>>>>
>>>>  ifeq ($(MACHINE),x86_64)
>>>> @@ -91,6 +91,9 @@ TEST_FILES := test_vmalloc.sh
>>>>  KSFT_KHDR_INSTALL := 1
>>>>  include ../lib.mk
>>>>
>>>> +$(OUTPUT)/madv_populate: vm_util.c
>>>> +$(OUTPUT)/split_huge_page_test: vm_util.c
>>> Not sure what this does but if we add a run entry for split_huge_page_test in
>>> run_vmselftests.sh we wont really need this patch.
>>>
>>> I'm not sure the reduction in code size is worth the change in run behavior.
>>>
>>> Unless I'm missing something I suggest we revert this patch and add a run entry
>>> for split_huge_page_test in run_vmselftests.sh. I can do this if no one objects.
>> The run behavior isn't being changed here. Only the build behavior is
>> being changed as we want to keep the common code in one file. You can
>> add the run entry as required. I don't know why do you think the
>> Makefile has changed the run behavior.
> 
> Before your commit running
>     `make TARGETS=vm; make TARGETS=vm run_tests`
> had the following run behavior:
>     - The only thing executed via the run_tests wrapper is run_vmtests.sh
>     - TAP output is 1/1:
>         TAP version 13
>         1..1
>         # selftests: vm: run_vmtests.sh
>         # arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64
> sparc64 x86_64
>         # -----------------------
>         # running ./hugepage-mmap
>         # -----------------------
>         ....
> 
> After your commit:
>     - Multiple executables (madv_populate, soft-dirty,
> split_huge_page_test, run_vmtests.sh) are defined and ran:
>          # selftests: vm: madv_populate
>          not ok 1 selftests: vm: madv_populate # exit=1
>          # selftests: vm: soft-dirty
>          ok 2 selftests: vm: soft-dirty
>          # selftests: vm: split_huge_page_test
>          ok 3 selftests: vm: split_huge_page_test
>          # selftests: vm: run_vmtests.sh
>          ok 4 selftests: vm: run_vmtests.sh # SKIP
> 
> I'm not saying utilizing the TEST_GEN_PROG variable is incorrect, I'm
> just pointing out that we have a sudden change in run behavior via the
> run_test wrapper. I personally think the TEST_GEN_PROG output is
> cleaner, but having two different ways of outputting results may be
> harder/confusing to parser. Additionally there is still the issue that
> madv_populate is being run twice for no reason.
Thank you for sharing. A directory inside selftests like selftests/vm
can have multiple individual tests. To me, it means that it can have
multiple binaries to run as individual tests. For selftests/vm,
historically we have this run_vmtests.sh as the only script which runs
all the tests inside the directory. This kind of script isn't present in
other selftests. So normally contributors are not aware of this script.
People use different ways to run selftests. So it doesn't get caught
easily. The tests can be run with different arguments through
run_vmtests.sh. But we shouldn't depend on run_vmtests.sh to run all the
tests as there are tests which have multiple source files and their
binary gets listed separately.

At this point, the parser can be updated. The duplicate runs of the
tests should be removed:
diff --git a/tools/testing/selftests/vm/run_vmtests.sh
b/tools/testing/selftests/vm/run_vmtests.sh
index e780e76c26b8..3bf946437ad9 100755
--- a/tools/testing/selftests/vm/run_vmtests.sh
+++ b/tools/testing/selftests/vm/run_vmtests.sh
@@ -166,9 +166,6 @@ run_test ./mremap_dontunmap

 run_test ./test_hmm.sh smoke

-# MADV_POPULATE_READ and MADV_POPULATE_WRITE tests
-run_test ./madv_populate
-
 run_test ./memfd_secret

 # KSM MADV_MERGEABLE test with 10 identical pages

The separate binaries are being run as I'd used TEST_GEN_PROGS. I hadn't
found any other way to build test with more than one source file. If
there is some other way, that should be used and supremacy of the
run_vmtests.sh can be kept.

> 
> Cheers,
> -- Nico
> 
>>
>>>
>>> Cheers,
>>> -- Nico
>>>
>>
>> --
>> Muhammad Usama Anjum
>>
> 

-- 
Muhammad Usama Anjum



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux