Re: [PATCH v1 1/5] KVM: arm64: Enable ring-based dirty memory tracking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marc,

On 8/19/22 6:00 PM, Marc Zyngier wrote:
On Fri, 19 Aug 2022 01:55:57 +0100,
Gavin Shan <gshan@xxxxxxxxxx> wrote:

The ring-based dirty memory tracking has been available and enabled
on x86 for a while. The feature is beneficial when the number of
dirty pages is small in a checkpointing system or live migration
scenario. More details can be found from fb04a1eddb1a ("KVM: X86:
Implement ring-based dirty memory tracking").

This enables the ring-based dirty memory tracking on ARM64. It's
notable that no extra reserved ring entries are needed on ARM64
because the huge pages are always split into base pages when page
dirty tracking is enabled.

Can you please elaborate on this? Adding a per-CPU ring of course
results in extra memory allocation, so there must be a subtle
x86-specific detail that I'm not aware of...


Sure. I guess it's helpful to explain how it works in next revision.
Something like below:

This enables the ring-based dirty memory tracking on ARM64. The feature
is enabled by CONFIG_HAVE_KVM_DIRTY_RING, detected and enabled by
CONFIG_HAVE_KVM_DIRTY_RING. A ring buffer is created on every vcpu and
each entry is described by 'struct kvm_dirty_gfn'. The ring buffer is
pushed by host when page becomes dirty and pulled by userspace. A vcpu
exit is forced when the ring buffer becomes full. The ring buffers on
all vcpus can be reset by ioctl command KVM_RESET_DIRTY_RINGS.

Yes, I think so. Adding a per-CPU ring results in extra memory allocation.
However, it's avoiding synchronization among multiple vcpus when dirty
pages happen on multiple vcpus. More discussion can be found from [1]

[1] https://patchwork.kernel.org/project/kvm/patch/BL2PR08MB4812F929A2760BC40EA757CF0630@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
(comment#8 from Radim Krčmář on May 3, 2016, 2:11 p.m. UTC)



Signed-off-by: Gavin Shan <gshan@xxxxxxxxxx>
---
  Documentation/virt/kvm/api.rst    | 2 +-
  arch/arm64/include/uapi/asm/kvm.h | 1 +
  arch/arm64/kvm/Kconfig            | 1 +
  arch/arm64/kvm/arm.c              | 8 ++++++++
  4 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index abd7c32126ce..19fa1ac017ed 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -8022,7 +8022,7 @@ regardless of what has actually been exposed through the CPUID leaf.
  8.29 KVM_CAP_DIRTY_LOG_RING
  ---------------------------
-:Architectures: x86
+:Architectures: x86, arm64
  :Parameters: args[0] - size of the dirty log ring
KVM is capable of tracking dirty memory using ring buffers that are
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 3bb134355874..7e04b0b8d2b2 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -43,6 +43,7 @@
  #define __KVM_HAVE_VCPU_EVENTS
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+#define KVM_DIRTY_LOG_PAGE_OFFSET 64

For context, the documentation says:

<quote>
- if KVM_CAP_DIRTY_LOG_RING is available, a number of pages at
   KVM_DIRTY_LOG_PAGE_OFFSET * PAGE_SIZE. [...]
</quote>

What is the reason for picking this particular value?


It's inherited from x86. I don't think it has to be this particular value.
The value is used to distinguish the region's owners like kvm_run, KVM_PIO_PAGE_OFFSET,
KVM_COALESCED_MMIO_PAGE_OFFSET, and KVM_DIRTY_LOG_PAGE_OFFSET.

How about to have 2 for KVM_DIRTY_LOG_PAGE_OFFSET in next revision?
The virtual area is cheap, I guess it's also nice to use x86's
pattern to have 64 for KVM_DIRTY_LOG_PAGE_OFFSET.

    #define KVM_COALESCED_MMIO_PAGE_OFFSET   1
    #define KVM_DIRTY_LOG_PAGE_OFFSET        2

#define KVM_REG_SIZE(id) \
  	(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index 815cc118c675..0309b2d0f2da 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -32,6 +32,7 @@ menuconfig KVM
  	select KVM_VFIO
  	select HAVE_KVM_EVENTFD
  	select HAVE_KVM_IRQFD
+	select HAVE_KVM_DIRTY_RING
  	select HAVE_KVM_MSI
  	select HAVE_KVM_IRQCHIP
  	select HAVE_KVM_IRQ_ROUTING
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 986cee6fbc7f..3de6b9b39db7 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -866,6 +866,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
  		if (!ret)
  			ret = 1;
+ /* Force vcpu exit if its dirty ring is soft-full */
+		if (unlikely(vcpu->kvm->dirty_ring_size &&
+			     kvm_dirty_ring_soft_full(&vcpu->dirty_ring))) {
+			vcpu->run->exit_reason = KVM_EXIT_DIRTY_RING_FULL;
+			trace_kvm_dirty_ring_exit(vcpu);
+			ret = 0;
+		}
+

Why can't this be moved to kvm_vcpu_exit_request() instead? I would
also very much like the check to be made a common helper with x86.

A seemingly approach would be to make this a request on dirty log
insertion, and avoid the whole "check the log size" on every run,
which adds pointless overhead to unsuspecting users (aka everyone).


I though of having the check in kvm_vcpu_exit_request(). The various
exit reasons are prioritized. x86 gives KVM_EXIT_DIRTY_RING_FULL the
highest priority and ARM64 is just to follow. I don't think it really
matters. I will improve it accordingly in next revision:

- Change kvm_dirty_ring_soft_full() to something as below in dirty_ring.c

  bool kvm_dirty_ring_soft_full(struct kvm_vcpu *vcpu)
  {
       struct kvm *kvm = vcpu->vcpu;
       struct kvm_dirty_ring *ring = &vcpu->dirty_ring;

       if (unlikely(kvm->dirty_ring_size &&
                    kvm_dirty_ring_used(ring) >= ring->soft_limit)) {
           vcpu->run->exit_reason = KVM_EXIT_DIRTY_RING_FULL;
           trace_kvm_dirty_ring_exit(vcpu);
           return true;
       }

       return false;
  }

- Use the modified kvm_dirty_ring_soft_full() in kvm_vcpu_exit_request().

Userspace needs KVM_EXIT_DIRTY_RING_FULL to collect the dirty log in time.
Otherwise, the dirty log in the ring buffer will be overwritten. I'm not
sure if anything else I missed?

Thanks,
Gavin








[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux