On Mon, Aug 15, 2022 at 11:08:34AM -0400, Jonathan Toppins wrote: > This creates a test collection in drivers/net/bonding for bonding > specific kernel selftests. > > The first test is a reproducer that provisions a bond and given the > specific order in how the ip-link(8) commands are issued the bond never > transmits an LACPDU frame on any of its slaves. > > Signed-off-by: Jonathan Toppins <jtoppins@xxxxxxxxxx> > --- > > Notes: > v2: > * fully integrated the test into the kselftests infrastructure > * moved the reproducer to under > tools/testing/selftests/drivers/net/bonding > * reduced the test to its minimial amount and used ip-link(8) for > all bond interface configuration > v3: > * rebase to latest net/master > * remove `#set -x` requested by Hangbin > > MAINTAINERS | 1 + > tools/testing/selftests/Makefile | 1 + > .../selftests/drivers/net/bonding/Makefile | 6 ++ > .../net/bonding/bond-break-lacpdu-tx.sh | 81 +++++++++++++++++++ > .../selftests/drivers/net/bonding/config | 1 + > .../selftests/drivers/net/bonding/settings | 1 + > 6 files changed, 91 insertions(+) > create mode 100644 tools/testing/selftests/drivers/net/bonding/Makefile > create mode 100755 tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh > create mode 100644 tools/testing/selftests/drivers/net/bonding/config > create mode 100644 tools/testing/selftests/drivers/net/bonding/settings > > diff --git a/MAINTAINERS b/MAINTAINERS > index f2d64020399b..e5fb14dc302d 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -3672,6 +3672,7 @@ F: Documentation/networking/bonding.rst > F: drivers/net/bonding/ > F: include/net/bond* > F: include/uapi/linux/if_bonding.h > +F: tools/testing/selftests/net/bonding/ > > BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER > M: Dan Robertson <dan@xxxxxxxxxxxxxxx> > diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile > index 10b34bb03bc1..c2064a35688b 100644 > --- a/tools/testing/selftests/Makefile > +++ b/tools/testing/selftests/Makefile > @@ -12,6 +12,7 @@ TARGETS += cpu-hotplug > TARGETS += damon > TARGETS += drivers/dma-buf > TARGETS += drivers/s390x/uvdevice > +TARGETS += drivers/net/bonding > TARGETS += efivarfs > TARGETS += exec > TARGETS += filesystems > diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile > new file mode 100644 > index 000000000000..ab6c54b12098 > --- /dev/null > +++ b/tools/testing/selftests/drivers/net/bonding/Makefile > @@ -0,0 +1,6 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# Makefile for net selftests > + > +TEST_PROGS := bond-break-lacpdu-tx.sh > + > +include ../../../lib.mk > diff --git a/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh > new file mode 100755 > index 000000000000..47ab90596acb > --- /dev/null > +++ b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh > @@ -0,0 +1,81 @@ > +#!/bin/sh > +# SPDX-License-Identifier: GPL-2.0 > + > +# Regression Test: > +# Verify LACPDUs get transmitted after setting the MAC address of > +# the bond. > +# > +# https://bugzilla.redhat.com/show_bug.cgi?id=2020773 > +# > +# +---------+ > +# | fab-br0 | > +# +---------+ > +# | > +# +---------+ > +# | fbond | > +# +---------+ > +# | | > +# +------+ +------+ > +# |veth1 | |veth2 | > +# +------+ +------+ > +# > +# We use veths instead of physical interfaces > + > +set -e > +tmp=$(mktemp -q dump.XXXXXX) > +cleanup() { > + ip link del fab-br0 >/dev/null 2>&1 || : > + ip link del fbond >/dev/null 2>&1 || : > + ip link del veth1-bond >/dev/null 2>&1 || : > + ip link del veth2-bond >/dev/null 2>&1 || : > + modprobe -r bonding >/dev/null 2>&1 || : > + rm -f -- ${tmp} > +} > + > +trap cleanup 0 1 2 > +cleanup > +sleep 1 > + > +# create the bridge > +ip link add fab-br0 address 52:54:00:3B:7C:A6 mtu 1500 type bridge \ > + forward_delay 15 > + > +# create the bond > +ip link add fbond type bond mode 4 miimon 200 xmit_hash_policy 1 \ > + ad_actor_sys_prio 65535 lacp_rate fast > + > +# set bond address > +ip link set fbond address 52:54:00:3B:7C:A6 > +ip link set fbond up > + > +# set again bond sysfs parameters > +ip link set fbond type bond ad_actor_sys_prio 65535 > + > +# create veths > +ip link add name veth1-bond type veth peer name veth1-end > +ip link add name veth2-bond type veth peer name veth2-end > + > +# add ports > +ip link set fbond master fab-br0 > +ip link set veth1-bond down master fbond > +ip link set veth2-bond down master fbond > + > +# bring up > +ip link set veth1-end up > +ip link set veth2-end up > +ip link set fab-br0 up > +ip link set fbond up > +ip addr add dev fab-br0 10.0.0.3 > + > +tcpdump -n -i veth1-end -e ether proto 0x8809 >${tmp} 2>&1 & > +sleep 15 > +pkill tcpdump >/dev/null 2>&1 > +rc=0 > +num=$(grep "packets captured" ${tmp} | awk '{print $1}') > +if test "$num" -gt 0; then > + echo "PASS, captured ${num}" > +else > + echo "FAIL" > + rc=1 > +fi > +exit $rc > diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config > new file mode 100644 > index 000000000000..dc1c22de3c92 > --- /dev/null > +++ b/tools/testing/selftests/drivers/net/bonding/config > @@ -0,0 +1 @@ > +CONFIG_BONDING=y > diff --git a/tools/testing/selftests/drivers/net/bonding/settings b/tools/testing/selftests/drivers/net/bonding/settings > new file mode 100644 > index 000000000000..867e118223cd > --- /dev/null > +++ b/tools/testing/selftests/drivers/net/bonding/settings > @@ -0,0 +1 @@ > +timeout=60 > -- > 2.31.1 > Acked-by: Hangbin Liu <liuhangbin@xxxxxxxxx>