The SGX2 page removal flow was introduced in previous patch and is
as follows:
1) Change the type of the pages to be removed to SGX_PAGE_TYPE_TRIM
using the ioctl() SGX_IOC_ENCLAVE_MODIFY_TYPES introduced in
previous patch.
2) Approve the page removal by running ENCLU[EACCEPT] from within
the enclave.
3) Initiate actual page removal using the ioctl()
SGX_IOC_ENCLAVE_REMOVE_PAGES introduced here.
Support the final step of the SGX2 page removal flow with ioctl()
SGX_IOC_ENCLAVE_REMOVE_PAGES. With this ioctl() the user specifies
a page range that should be removed. All pages in the provided
range should have the SGX_PAGE_TYPE_TRIM page type and the request
will fail with EPERM (Operation not permitted) if a page that does
not have the correct type is encountered. Page removal can fail
on any page within the provided range. Support partial success by
returning the number of pages that were successfully removed.
Since actual page removal will succeed even if ENCLU[EACCEPT] was not
run from within the enclave the ENCLU[EMODPR] instruction with RWX
permissions is used as a no-op mechanism to ensure ENCLU[EACCEPT] was
successfully run from within the enclave before the enclave page is
removed.
If the user omits running SGX_IOC_ENCLAVE_REMOVE_PAGES the pages will
still be removed when the enclave is unloaded.
Reviewed-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
Tested-by: Haitao Huang <haitao.huang@xxxxxxxxx>
Tested-by: Vijay Dhanraj <vijay.dhanraj@xxxxxxxxx>
Tested-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
---
Changes since V4:
- Add Haitao's Tested-by tag.
- Add Vijay's Tested-by tag.
- Add Jarkko's Tested-by tag.
Changes since V3:
- Add Jarkko's Reviewed-by tag.
- Rename SGX_IOC_ENCLAVE_MODIFY_TYPE to
SGX_IOC_ENCLAVE_MODIFY_TYPES. (Jarkko)
Changes since V2:
- Adjust ioctl number since removal of
SGX_IOC_ENCLAVE_RELAX_PERMISSIONS.
Changes since V1:
- Update comments to refer to new ioctl() names SGX_IOC_PAGE_MODT ->
SGX_IOC_ENCLAVE_MODIFY_TYPE.
- Fix kernel-doc to have () as part of function name.
- Change name of ioctl():
SGX_IOC_PAGE_REMOVE -> SGX_IOC_ENCLAVE_REMOVE_PAGES (Jarkko).
- With the above name change the page removal ioctl() has its name
aligned with existing SGX_IOC_ENCLAVE_ADD_PAGES ioctl(). Also align
naming of struct and functions:
struct sgx_page_remove -> struct sgx_enclave_remove_pages
sgx_page_remove() -> sgx_encl_remove_pages()
sgx_ioc_page_remove() -> sgx_ioc_enclave_remove_pages()
- Use new SGX2 checking helper.
- When loading enclave page, make error code consistent with other
instances to help user distinguish between permanent and temporary
failures.
- Move kernel-doc to function that provides documentation for
Documentation/x86/sgx.rst.
- Remove redundant comment.
- Use offset/length validation utility.
- Make explicit which member of struct sgx_enclave_remove_pages is for
output (Dave).
arch/x86/include/uapi/asm/sgx.h | 21 +++++
arch/x86/kernel/cpu/sgx/ioctl.c | 145 ++++++++++++++++++++++++++++++++
2 files changed, 166 insertions(+)
diff --git a/arch/x86/include/uapi/asm/sgx.h b/arch/x86/include/uapi/asm/sgx.h
index 567f6166c24a..2dd35bbdc822 100644
--- a/arch/x86/include/uapi/asm/sgx.h
+++ b/arch/x86/include/uapi/asm/sgx.h
@@ -33,6 +33,8 @@ enum sgx_page_flags {
_IOWR(SGX_MAGIC, 0x05, struct sgx_enclave_restrict_permissions)
#define SGX_IOC_ENCLAVE_MODIFY_TYPES \
_IOWR(SGX_MAGIC, 0x06, struct sgx_enclave_modify_types)
+#define SGX_IOC_ENCLAVE_REMOVE_PAGES \
+ _IOWR(SGX_MAGIC, 0x07, struct sgx_enclave_remove_pages)
/**
* struct sgx_enclave_create - parameter structure for the
@@ -117,6 +119,25 @@ struct sgx_enclave_modify_types {
__u64 count;
};
+/**
+ * struct sgx_enclave_remove_pages - %SGX_IOC_ENCLAVE_REMOVE_PAGES parameters
+ * @offset: starting page offset (page aligned relative to enclave base
+ * address defined in SECS)
+ * @length: length of memory (multiple of the page size)
+ * @count: (output) bytes successfully changed (multiple of page size)
+ *
+ * Regular (PT_REG) or TCS (PT_TCS) can be removed from an initialized
+ * enclave if the system supports SGX2. First, the %SGX_IOC_ENCLAVE_MODIFY_TYPES
+ * ioctl() should be used to change the page type to PT_TRIM. After that
+ * succeeds ENCLU[EACCEPT] should be run from within the enclave and then
+ * %SGX_IOC_ENCLAVE_REMOVE_PAGES can be used to complete the page removal.
+ */
+struct sgx_enclave_remove_pages {
+ __u64 offset;
+ __u64 length;
+ __u64 count;
+};
+
struct sgx_enclave_run;
/**
diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c
index 9ccafbfc4811..1a2595f261d3 100644
--- a/arch/x86/kernel/cpu/sgx/ioctl.c
+++ b/arch/x86/kernel/cpu/sgx/ioctl.c
@@ -1071,6 +1071,148 @@ static long sgx_ioc_enclave_modify_types(struct sgx_encl *encl,
return ret;
}
+/**
+ * sgx_encl_remove_pages() - Remove trimmed pages from SGX enclave
+ * @encl: Enclave to which the pages belong
+ * @params: Checked parameters from user on which pages need to be removed
+ *
+ * Return:
+ * - 0: Success.
+ * - -errno: Otherwise.
+ */
+static long sgx_encl_remove_pages(struct sgx_encl *encl,
+ struct sgx_enclave_remove_pages *params)
+{
+ struct sgx_encl_page *entry;
+ struct sgx_secinfo secinfo;
+ unsigned long addr;
+ unsigned long c;
+ void *epc_virt;
+ int ret;
+
+ memset(&secinfo, 0, sizeof(secinfo));
+ secinfo.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_X;
+
+ for (c = 0 ; c < params->length; c += PAGE_SIZE) {
+ addr = encl->base + params->offset + c;
+
+ mutex_lock(&encl->lock);
+
+ entry = sgx_encl_load_page(encl, addr);
+ if (IS_ERR(entry)) {
+ ret = PTR_ERR(entry) == -EBUSY ? -EAGAIN : -EFAULT;
+ goto out_unlock;
+ }
+
+ if (entry->type != SGX_PAGE_TYPE_TRIM) {
+ ret = -EPERM;
+ goto out_unlock;
+ }
+
+ /*
+ * ENCLS[EMODPR] is a no-op instruction used to inform if
+ * ENCLU[EACCEPT] was run from within the enclave. If
+ * ENCLS[EMODPR] is run with RWX on a trimmed page that is
+ * not yet accepted then it will return
+ * %SGX_PAGE_NOT_MODIFIABLE, after the trimmed page is
+ * accepted the instruction will encounter a page fault.
+ */
+ epc_virt = sgx_get_epc_virt_addr(entry->epc_page);
+ ret = __emodpr(&secinfo, epc_virt);
+ if (!encls_faulted(ret) || ENCLS_TRAPNR(ret) != X86_TRAP_PF) {
+ ret = -EPERM;
+ goto out_unlock;
+ }
+
+ if (sgx_unmark_page_reclaimable(entry->epc_page)) {
+ ret = -EBUSY;
+ goto out_unlock;
+ }
+
+ /*
+ * Do not keep encl->lock because of dependency on
+ * mmap_lock acquired in sgx_zap_enclave_ptes().
+ */
+ mutex_unlock(&encl->lock);
+
+ sgx_zap_enclave_ptes(encl, addr);
+
+ mutex_lock(&encl->lock);
+
+ sgx_encl_free_epc_page(entry->epc_page);
+ encl->secs_child_cnt--;
+ entry->epc_page = NULL;
+ xa_erase(&encl->page_array, PFN_DOWN(entry->desc));
+ sgx_encl_shrink(encl, NULL);
+ kfree(entry);
+
+ mutex_unlock(&encl->lock);
+ }
+
+ ret = 0;
+ goto out;
+
+out_unlock:
+ mutex_unlock(&encl->lock);
+out:
+ params->count = c;
+
+ return ret;
+}
+
+/**
+ * sgx_ioc_enclave_remove_pages() - handler for %SGX_IOC_ENCLAVE_REMOVE_PAGES
+ * @encl: an enclave pointer
+ * @arg: userspace pointer to &struct sgx_enclave_remove_pages instance
+ *
+ * Final step of the flow removing pages from an initialized enclave. The
+ * complete flow is:
+ *
+ * 1) User changes the type of the pages to be removed to %SGX_PAGE_TYPE_TRIM
+ * using the %SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl().
+ * 2) User approves the page removal by running ENCLU[EACCEPT] from within
+ * the enclave.
+ * 3) User initiates actual page removal using the
+ * %SGX_IOC_ENCLAVE_REMOVE_PAGES ioctl() that is handled here.
+ *
+ * First remove any page table entries pointing to the page and then proceed
+ * with the actual removal of the enclave page and data in support of it.
+ *
+ * VA pages are not affected by this removal. It is thus possible that the
+ * enclave may end up with more VA pages than needed to support all its
+ * pages.
+ *
+ * Return:
+ * - 0: Success
+ * - -errno: Otherwise
+ */
+static long sgx_ioc_enclave_remove_pages(struct sgx_encl *encl,
+ void __user *arg)
+{
+ struct sgx_enclave_remove_pages params;
+ long ret;
+
+ ret = sgx_ioc_sgx2_ready(encl);
+ if (ret)
+ return ret;
+
+ if (copy_from_user(¶ms, arg, sizeof(params)))
+ return -EFAULT;
+
+ if (sgx_validate_offset_length(encl, params.offset, params.length))
+ return -EINVAL;
+
+ if (params.count)
+ return -EINVAL;
+
+ ret = sgx_encl_remove_pages(encl, ¶ms);
+
+ if (copy_to_user(arg, ¶ms, sizeof(params)))
+ return -EFAULT;
+
+ return ret;
+}
+
long sgx_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
{
struct sgx_encl *encl = filep->private_data;
@@ -1099,6 +1241,9 @@ long sgx_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
case SGX_IOC_ENCLAVE_MODIFY_TYPES:
ret = sgx_ioc_enclave_modify_types(encl, (void __user *)arg);
break;
+ case SGX_IOC_ENCLAVE_REMOVE_PAGES:
+ ret = sgx_ioc_enclave_remove_pages(encl, (void __user *)arg);
+ break;
default:
ret = -ENOIOCTLCMD;
break;
--
2.25.1
