From: Reinette Chatre <reinette.chatre@xxxxxxxxx>
Create enclave with additional heap that consumes all physical SGX
memory and then remove it.
Depending on the available SGX memory this test could take a
significant time to run (several minutes) as it (1) creates the
enclave, (2) changes the type of every page to be trimmed,
(3) enters the enclave once per page to run EACCEPT, before
(4) the pages are finally removed.
Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
---
tools/testing/selftests/sgx/main.c | 122 +++++++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index c691a4864db8..5c4faf6d5640 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -378,7 +378,129 @@ TEST_F(enclave, unclobbered_vdso_oversubscribed)
EXPECT_EQ(get_op.value, MAGIC);
EXPECT_EEXIT(&self->run);
EXPECT_EQ(self->run.user_data, 0);
+}
+
+TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900)
+{
+ struct sgx_enclave_remove_pages remove_ioc;
+ struct encl_op_get_from_buf get_op;
+ struct encl_op_eaccept eaccept_op;
+ struct encl_op_put_to_buf put_op;
+ struct sgx_enclave_modt modt_ioc;
+ struct sgx_secinfo secinfo;
+ struct encl_segment *heap;
+ unsigned long total_mem;
+ int ret, errno_save;
+ unsigned long addr;
+ unsigned long i;
+
+ /*
+ * Create enclave with additional heap that is as big as all
+ * available physical SGX memory.
+ */
+ total_mem = get_total_epc_mem();
+ ASSERT_NE(total_mem, 0);
+ TH_LOG("Creating an enclave with %lu bytes heap may take a while ...",
+ total_mem);
+ ASSERT_TRUE(setup_test_encl(total_mem, &self->encl, _metadata));
+
+ /*
+ * Hardware (SGX2) and kernel support is needed for this test. Start
+ * with check that test has a chance of succeeding.
+ */
+ memset(&modt_ioc, 0, sizeof(modt_ioc));
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPE, &modt_ioc);
+
+ if (ret == -1) {
+ if (errno == ENOTTY)
+ SKIP(return, "Kernel does not support SGX_IOC_ENCLAVE_MODIFY_TYPE ioctl()");
+ else if (errno == ENODEV)
+ SKIP(return, "System does not support SGX2");
+ }
+
+ /*
+ * Invalid parameters were provided during sanity check,
+ * expect command to fail.
+ */
+ EXPECT_EQ(ret, -1);
+
+ /* SGX2 is supported by kernel and hardware, test can proceed. */
+ memset(&self->run, 0, sizeof(self->run));
+ self->run.tcs = self->encl.encl_base;
+
+ heap = &self->encl.segment_tbl[self->encl.nr_segments - 1];
+
+ put_op.header.type = ENCL_OP_PUT_TO_BUFFER;
+ put_op.value = MAGIC;
+
+ EXPECT_EQ(ENCL_CALL(&put_op, &self->run, false), 0);
+
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.user_data, 0);
+
+ get_op.header.type = ENCL_OP_GET_FROM_BUFFER;
+ get_op.value = 0;
+
+ EXPECT_EQ(ENCL_CALL(&get_op, &self->run, false), 0);
+
+ EXPECT_EQ(get_op.value, MAGIC);
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.user_data, 0);
+
+ /* Trim entire heap. */
+ memset(&modt_ioc, 0, sizeof(modt_ioc));
+ memset(&secinfo, 0, sizeof(secinfo));
+
+ secinfo.flags = SGX_PAGE_TYPE_TRIM << 8;
+ modt_ioc.offset = heap->offset;
+ modt_ioc.length = heap->size;
+ modt_ioc.secinfo = (unsigned long)&secinfo;
+
+ TH_LOG("Changing type of %zd bytes to trimmed may take a while ...",
+ heap->size);
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPE, &modt_ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(errno_save, 0);
+ EXPECT_EQ(modt_ioc.result, 0);
+ EXPECT_EQ(modt_ioc.count, heap->size);
+
+ /* EACCEPT all removed pages. */
+ addr = self->encl.encl_base + heap->offset;
+
+ eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED;
+ eaccept_op.header.type = ENCL_OP_EACCEPT;
+
+ TH_LOG("Entering enclave to run EACCEPT for each page of %zd bytes may take a while ...",
+ heap->size);
+ for (i = 0; i < heap->size; i += 4096) {
+ eaccept_op.epc_addr = addr + i;
+ eaccept_op.ret = 0;
+ EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
+
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+ ASSERT_EQ(eaccept_op.ret, 0);
+ ASSERT_EQ(self->run.function, EEXIT);
+ }
+
+ /* Complete page removal. */
+ memset(&remove_ioc, 0, sizeof(remove_ioc));
+
+ remove_ioc.offset = heap->offset;
+ remove_ioc.length = heap->size;
+
+ TH_LOG("Removing %zd bytes from enclave may take a while ...",
+ heap->size);
+ ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_REMOVE_PAGES, &remove_ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(errno_save, 0);
+ EXPECT_EQ(remove_ioc.count, heap->size);
}
TEST_F(enclave, clobbered_vdso)
--
2.35.1
