[PATCH v8 06/38] arm64/sme: Manually encode SME instructions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As with SVE rather than impose ambitious toolchain requirements for SME
we manually encode the few instructions which we require in order to
perform the work the kernel needs to do. The instructions used to save
and restore context are provided as assembler macros while those for
entering and leaving streaming mode are done in asm volatile blocks
since they are expected to be used from C.

We could do the SMSTART and SMSTOP operations with read/modify/write
cycles on SVCR but using the aliases provided for individual field
accesses should be slightly faster. These instructions are aliases for
MSR but since our minimum toolchain requirements are old enough to mean
that we can't use the sX_X_cX_cX_X form and they always use xzr rather
than taking a value like write_sysreg_s() wants we just use .inst.

Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 arch/arm64/include/asm/fpsimd.h       | 25 +++++++++++++
 arch/arm64/include/asm/fpsimdmacros.h | 53 +++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)

diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index cb24385e3632..c90f7f99a768 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -249,6 +249,31 @@ static inline void sve_setup(void) { }
 
 #endif /* ! CONFIG_ARM64_SVE */
 
+#ifdef CONFIG_ARM64_SME
+
+static inline void sme_smstart_sm(void)
+{
+	asm volatile(".inst 0xd503437f");
+}
+
+static inline void sme_smstop_sm(void)
+{
+	asm volatile(".inst 0xd503427f");
+}
+
+static inline void sme_smstop(void)
+{
+	asm volatile(".inst 0xd503467f");
+}
+
+#else
+
+static inline void sme_smstart_sm(void) { }
+static inline void sme_smstop_sm(void) { }
+static inline void sme_smstop(void) { }
+
+#endif /* ! CONFIG_ARM64_SME */
+
 /* For use by EFI runtime services calls only */
 extern void __efi_fpsimd_begin(void);
 extern void __efi_fpsimd_end(void);
diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h
index 2509d7dde55a..11c426ddd62c 100644
--- a/arch/arm64/include/asm/fpsimdmacros.h
+++ b/arch/arm64/include/asm/fpsimdmacros.h
@@ -93,6 +93,12 @@
 	.endif
 .endm
 
+.macro _sme_check_wv v
+	.if (\v) < 12 || (\v) > 15
+		.error "Bad vector select register \v."
+	.endif
+.endm
+
 /* SVE instruction encodings for non-SVE-capable assemblers */
 /* (pre binutils 2.28, all kernel capable clang versions support SVE) */
 
@@ -174,6 +180,53 @@
 		| (\np)
 .endm
 
+/* SME instruction encodings for non-SME-capable assemblers */
+
+/* RDSVL X\nx, #\imm */
+.macro _sme_rdsvl nx, imm
+	_check_general_reg \nx
+	_check_num (\imm), -0x20, 0x1f
+	.inst	0x04bf5800			\
+		| (\nx)				\
+		| (((\imm) & 0x3f) << 5)
+.endm
+
+/*
+ * STR (vector from ZA array):
+ *	STR ZA[\nw, #\offset], [X\nxbase, #\offset, MUL VL]
+ */
+.macro _sme_str_zav nw, nxbase, offset=0
+	_sme_check_wv \nw
+	_check_general_reg \nxbase
+	_check_num (\offset), -0x100, 0xff
+	.inst	0xe1200000			\
+		| (((\nw) & 3) << 13)		\
+		| ((\nxbase) << 5)		\
+		| ((\offset) & 7)
+.endm
+
+/*
+ * LDR (vector to ZA array):
+ *	LDR ZA[\nw, #\offset], [X\nxbase, #\offset, MUL VL]
+ */
+.macro _sme_ldr_zav nw, nxbase, offset=0
+	_sme_check_wv \nw
+	_check_general_reg \nxbase
+	_check_num (\offset), -0x100, 0xff
+	.inst	0xe1000000			\
+		| (((\nw) & 3) << 13)		\
+		| ((\nxbase) << 5)		\
+		| ((\offset) & 7)
+.endm
+
+/*
+ * Zero the entire ZA array
+ *	ZERO ZA
+ */
+.macro zero_za
+	.inst 0xc00800ff
+.endm
+
 .macro __for from:req, to:req
 	.if (\from) == (\to)
 		_for__body %\from
-- 
2.30.2




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux