This is similar to TCP MD5 in functionality but it's sufficiently different that wire formats are incompatible. Compared to TCP-MD5 more algorithms are supported and multiple keys can be used on the same connection but there is still no negotiation mechanism. Expected use-case is protecting long-duration BGP/LDP connections between routers using pre-shared keys. The goal of this series is to allow routers using the linux TCP stack to interoperate with vendors such as Cisco and Juniper. Both algorithms described in RFC5926 are implemented but the code is not very easily extensible beyond that. In particular there are several code paths making stack allocations based on RFC5926 maximum, those would have to be increased. Support for arbitrary algorithms was requested in reply to previous posts but I believe there is no real use case for that. The current implementation is somewhat loose regarding configuration: * Overlaping MKTs can be configured despite what RFC5925 says * Current key can be deleted * If multiple keys are valid for a destination the kernel picks one in an unpredictable manner (this can be overridden). These conditions could be tightened but it is not clear the kernel should prevent misconfiguration from userspace. This version implements prefixlen and incorporates comments from v2 as well as some unrelated fixes. Here are some known flaws and limitations: * Crypto API is used with buffers on the stack and inside struct sock, this might not work on all arches. I'm currently only testing x64 VMs * Interaction with TCP-MD5 not tested in all corners. * Interaction with FASTOPEN not tested and unlikely to work because sequence number assumptions for syn/ack. * Not clear if crypto_ahash_setkey might sleep. If some implementation do that then maybe they could be excluded through alloc flags. * Traffic key is not cached (reducing performance) * There is no useful way to list keys, making userspace debug difficult. Some testing support is included in nettest and fcnal-test.sh, similar to the current level of tcp-md5 testing. A more elaborate test suite using pytest and scapy is available out of tree: https://github.com/cdleonard/tcp-authopt-test That test suite is much larger that the kernel code and did not receive many comments so I will attempt to push it separately (if at all). Changes for frr (old): https://github.com/FRRouting/frr/pull/9442 That PR was made early for ABI feedback, it has many issues. Changes for yabgp (old): https://github.com/cdleonard/yabgp/commits/tcp_authopt This can be use for easy interoperability testing with cisco/juniper/etc. Changes since PATCH v2: * Protect tcp_authopt_alg_get/put_tfm with local_bh_disable instead of preempt_disable. This caused signature corruption when send path executing with BH enabled was interrupted by recv. * Fix accepted keyids not configured locally as "unexpected". If any key is configured that matches the peer then traffic MUST be signed. * Fix issues related to sne rollover during handshake itself. (Francesco) * Implement and test prefixlen (David) * Replace shash with ahash and reuse some of the MD5 code (Dmitry) * Parse md5+ao options only once in the same function (Dmitry) * Pass tcp_authopt_info into inbound check path, this avoids second rcu dereference for same packet. * Pass tcp_request_socket into inbound check path instead of just listen socket. This is required for SNE rollover during handshake and clearifies ISN handling. * Do not allow disabling via sysctl after enabling once, this is difficult to support well (David) * Verbose check for sysctl_tcp_authopt (Dmitry) * Use netif_index_is_l3_master (David) * Cleanup ipvx_addr_match (David) * Add a #define tcp_authopt_needed to wrap static key usage because it looks nicer. * Replace rcu_read_lock with rcu_dereference_protected in SNE updates (Eric) Link: https://lore.kernel.org/netdev/cover.1635784253.git.cdleonard@xxxxxxxxx/ Changes since PATCH v1: * Implement Sequence Number Extension * Implement l3index for vrf: TCP_AUTHOPT_KEY_IFINDEX as equivalent of TCP_MD5SIG_FLAG_IFINDEX * Expand TCP-AO tests in fcnal-test.sh to near-parity with md5. * Show addr/port on failure similar to md5 * Remove tox dependency from test suite (create venv directly) * Switch default pytest output format to TAP (kselftest standard) * Fix _copy_from_sockptr_tolerant stack corruption on short sockopts. This was covered in test but error was invisible without STACKPROTECTOR=y * Fix sysctl_tcp_authopt check in tcp_get_authopt_val before memset. This was harmless because error code is checked in getsockopt anyway. * Fix dropping md5 packets on all sockets with AO enabled * Fix checking (key->recv_id & TCP_AUTHOPT_KEY_ADDR_BIND) instead of key->flags in tcp_authopt_key_match_exact * Fix PATCH 1/19 not compiling due to missing "int err" declaration * Add ratelimited message for AO and MD5 both present * Export all symbols required by CONFIG_IPV6=m (again) * Fix compilation with CONFIG_TCP_AUTHOPT=y CONFIG_TCP_MD5SIG=n * Fix checkpatch issues * Pass -rrequirements.txt to tox to avoid dependency variation. Link: https://lore.kernel.org/netdev/cover.1632240523.git.cdleonard@xxxxxxxxx/ Changes since RFCv3: * Implement TCP_AUTHOPT handling for timewait and reset replies. Write tests to execute these paths by injecting packets with scapy * Handle combining md5 and authopt: if both are configured use authopt. * Fix locking issues around send_key, introduced in on of the later patches. * Handle IPv4-mapped-IPv6 addresses: it used to be that an ipv4 SYN sent to an ipv6 socket with TCP-AO triggered WARN * Implement un-namespaced sysctl disabled this feature by default * Allocate new key before removing any old one in setsockopt (Dmitry) * Remove tcp_authopt_key_info.local_id because it's no longer used (Dmitry) * Propagate errors from TCP_AUTHOPT getsockopt (Dmitry) * Fix no-longer-correct TCP_AUTHOPT_KEY_DEL docs (Dmitry) * Simplify crypto allocation (Eric) * Use kzmalloc instead of __GFP_ZERO (Eric) * Add static_key_false tcp_authopt_needed (Eric) * Clear authopt_info copied from oldsk in __tcp_authopt_openreq (Eric) * Replace memcmp in ipv4 and ipv6 addr comparisons (Eric) * Export symbols for CONFIG_IPV6=m (kernel test robot) * Mark more functions static (kernel test robot) * Fix build with CONFIG_PROVE_RCU_LIST=y (kernel test robot) Link: https://lore.kernel.org/netdev/cover.1629840814.git.cdleonard@xxxxxxxxx/ Changes since RFCv2: * Removed local_id from ABI and match on send_id/recv_id/addr * Add all relevant out-of-tree tests to tools/testing/selftests * Return an error instead of ignoring unknown flags, hopefully this makes it easier to extend. * Check sk_family before __tcp_authopt_info_get_or_create in tcp_set_authopt_key * Use sock_owned_by_me instead of WARN_ON(!lockdep_sock_is_held(sk)) * Fix some intermediate build failures reported by kbuild robot * Improve documentation Link: https://lore.kernel.org/netdev/cover.1628544649.git.cdleonard@xxxxxxxxx/ Changes since RFC: * Split into per-topic commits for ease of review. The intermediate commits compile with a few "unused function" warnings and don't do anything useful by themselves. * Add ABI documention including kernel-doc on uapi * Fix lockdep warnings from crypto by creating pools with one shash for each cpu * Accept short options to setsockopt by padding with zeros; this approach allows increasing the size of the structs in the future. * Support for aes-128-cmac-96 * Support for binding addresses to keys in a way similar to old tcp_md5 * Add support for retrieving received keyid/rnextkeyid and controling the keyid/rnextkeyid being sent. Link: https://lore.kernel.org/netdev/01383a8751e97ef826ef2adf93bfde3a08195a43.1626693859.git.cdleonard@xxxxxxxxx/ ``` Leonard Crestez (18): tcp: authopt: Initial support and key management docs: Add user documentation for tcp_authopt tcp: authopt: Add crypto initialization tcp: md5: Refactor tcp_sig_hash_skb_data for AO tcp: authopt: Compute packet signatures tcp: authopt: Hook into tcp core tcp: authopt: Disable via sysctl by default tcp: authopt: Implement Sequence Number Extension tcp: ipv6: Add AO signing for tcp_v6_send_response tcp: authopt: Add support for signing skb-less replies tcp: ipv4: Add AO signing for skb-less replies tcp: authopt: Add key selection controls tcp: authopt: Add initial l3index support tcp: authopt: Add NOSEND/NORECV flags tcp: authopt: Add prefixlen support selftests: nettest: Rename md5_prefix to key_addr_prefix selftests: nettest: Initial tcp_authopt support selftests: net/fcnal: Initial tcp_authopt support Documentation/networking/index.rst | 1 + Documentation/networking/ip-sysctl.rst | 6 + Documentation/networking/tcp_authopt.rst | 69 + include/linux/tcp.h | 9 + include/net/tcp.h | 27 +- include/net/tcp_authopt.h | 316 ++++ include/uapi/linux/snmp.h | 1 + include/uapi/linux/tcp.h | 137 ++ net/ipv4/Kconfig | 14 + net/ipv4/Makefile | 1 + net/ipv4/proc.c | 1 + net/ipv4/sysctl_net_ipv4.c | 39 + net/ipv4/tcp.c | 68 +- net/ipv4/tcp_authopt.c | 1671 +++++++++++++++++++++ net/ipv4/tcp_input.c | 41 +- net/ipv4/tcp_ipv4.c | 136 +- net/ipv4/tcp_minisocks.c | 12 + net/ipv4/tcp_output.c | 86 +- net/ipv6/tcp_ipv6.c | 108 +- tools/testing/selftests/net/fcnal-test.sh | 298 ++++ tools/testing/selftests/net/nettest.c | 123 +- 21 files changed, 3085 insertions(+), 79 deletions(-) create mode 100644 Documentation/networking/tcp_authopt.rst create mode 100644 include/net/tcp_authopt.h create mode 100644 net/ipv4/tcp_authopt.c base-commit: 1fe5b01262844be03de98afdd56d1d393df04d7e -- 2.25.1
