Re: selftests/net/fcnal-test.sh: ipv6_ping test failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/7/21 8:58 AM, Jakub Kicinski wrote:
> Adding David and Zhijian.
> 
> On Tue, 7 Dec 2021 07:07:40 +0000 Zhou, Jie2X wrote:
>> hi,
>>
>>   I test ipv6_ping by "./fcnal-test.sh -v -t ipv6_ping".
>>   There are two tests failed.
>>
>>    TEST: ping out, VRF bind - ns-B IPv6 LLA                                      [FAIL]
>>    TEST: ping out, VRF bind - multicast IP                                       [FAIL]
>>
>>    While in fcnal-test.sh the expected command result is 2, the result is 1, so the test failed.
>>    ipv6_ping_vrf()
>>    {
>>     ......
>>         for a in ${NSB_LINKIP6}%${VRF} ${MCAST}%${VRF}
>>         do
>>                 log_start
>>                 show_hint "Fails since VRF device does not support linklocal or multicast"
>>                 run_cmd ${ping6} -c1 -w1 ${a}
>>                 log_test_addr ${a} $? 2 "ping out, VRF bind"
>>         done
>>
>>     The ipv6_ping test output is attached.
>>     Did I set something wrong result that these tests failed?
>>
>> best regards,

ping6 is failing as it should. Can you send a patch to change the
expected rc from 2 to 1?



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux