Add a set of tests for the new gpio-sim module. This is a pure shell
test-suite and uses the helper programs available in the gpio selftests
directory. These test-cases only test the functionalities exposed by the
gpio-sim driver, not those handled by core gpiolib code.
Signed-off-by: Bartosz Golaszewski <brgl@xxxxxxxx>
---
tools/testing/selftests/gpio/Makefile | 2 +-
tools/testing/selftests/gpio/config | 1 +
tools/testing/selftests/gpio/gpio-sim.sh | 306 +++++++++++++++++++++++
3 files changed, 308 insertions(+), 1 deletion(-)
create mode 100755 tools/testing/selftests/gpio/gpio-sim.sh
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile
index 293aa9749408..71b306602368 100644
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-TEST_PROGS := gpio-mockup.sh
+TEST_PROGS := gpio-mockup.sh gpio-sim.sh
TEST_FILES := gpio-mockup-sysfs.sh
TEST_GEN_PROGS_EXTENDED := gpio-mockup-cdev gpio-chip-info gpio-line-name
CFLAGS += -O2 -g -Wall -I../../../../usr/include/
diff --git a/tools/testing/selftests/gpio/config b/tools/testing/selftests/gpio/config
index ce100342c20b..409a8532facc 100644
--- a/tools/testing/selftests/gpio/config
+++ b/tools/testing/selftests/gpio/config
@@ -1,3 +1,4 @@
CONFIG_GPIOLIB=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_MOCKUP=m
+CONFIG_GPIO_SIM=m
diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh
new file mode 100755
index 000000000000..4d8759d29eac
--- /dev/null
+++ b/tools/testing/selftests/gpio/gpio-sim.sh
@@ -0,0 +1,306 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Bartosz Golaszewski <brgl@xxxxxxxx>
+
+BASE_DIR=`dirname $0`
+CONFIGFS_DIR="/sys/kernel/config/gpio-sim"
+MODULE="gpio-sim"
+
+fail() {
+ echo "$*" >&2
+ echo "GPIO $MODULE test FAIL"
+ exit 1
+}
+
+skip() {
+ echo "$*" >&2
+ echo "GPIO $MODULE test SKIP"
+ exit 4
+}
+
+remove_chip() {
+ local CHIP=$1
+
+ LINES=`ls $CONFIGFS_DIR/$CHIP/ | egrep ^line`
+ if [ "$?" == 0 ]; then
+ for LINE in $LINES; do
+ if [ -e $CONFIGFS_DIR/$CHIP/$LINE/hog ]; then
+ rmdir $CONFIGFS_DIR/$CHIP/$LINE/hog || fail "Unable to remove the hog"
+ fi
+
+ rmdir $CONFIGFS_DIR/$CHIP/$LINE || fail "Unable to remove the line"
+ done
+ fi
+
+ rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip"
+}
+
+configfs_cleanup() {
+ for CHIP in `ls $CONFIGFS_DIR/`; do
+ remove_chip $CHIP
+ done
+}
+
+create_chip() {
+ local CHIP=$1
+ local CHIP_DIR="$CONFIGFS_DIR/$CHIP"
+
+ mkdir $CHIP_DIR
+}
+
+set_label() {
+ local CHIP=$1
+ local LABEL=$2
+
+ echo $LABEL > $CONFIGFS_DIR/$CHIP/label || fail "Unable to set the chip label"
+}
+
+set_num_lines() {
+ local CHIP=$1
+ local NUM_LINES=$2
+
+ echo $NUM_LINES > $CONFIGFS_DIR/$CHIP/num_lines || fail "Unable to set the number of lines"
+}
+
+set_line_name() {
+ local CHIP=$1
+ local OFFSET=$2
+ local NAME=$3
+ local LINE_DIR=$CONFIGFS_DIR/$CHIP/line$OFFSET
+
+ test -d $LINE_DIR || mkdir $LINE_DIR
+ echo $NAME > $LINE_DIR/name || fail "Unable to set the line name"
+}
+
+enable_chip() {
+ local CHIP=$1
+
+ echo 1 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to enable the chip"
+}
+
+disable_chip() {
+ local CHIP=$1
+
+ echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip"
+}
+
+configfs_chip_name() {
+ local CHIP="$1"
+
+ cat $CONFIGFS_DIR/$CHIP/chip_name 2> /dev/null || return 1
+}
+
+configfs_dev_name() {
+ local CHIP="$1"
+
+ cat $CONFIGFS_DIR/$CHIP/dev_name 2> /dev/null || return 1
+}
+
+get_chip_num_lines() {
+ local CHIP="$1"
+
+ $BASE_DIR/gpio-chip-info /dev/`configfs_chip_name $CHIP` num-lines
+}
+
+get_chip_label() {
+ local CHIP="$1"
+
+ $BASE_DIR/gpio-chip-info /dev/`configfs_chip_name $CHIP` label
+}
+
+get_line_name() {
+ local CHIP="$1"
+ local OFFSET="$2"
+
+ $BASE_DIR/gpio-line-name /dev/`configfs_chip_name $CHIP` $OFFSET
+}
+
+sysfs_set_pull() {
+ local CHIP="$1"
+ local OFFSET="$2"
+ local PULL="$3"
+ local SYSFSPATH="/sys/devices/platform/`configfs_dev_name $CHIP`/sim_gpio$OFFSET/pull"
+
+ echo $PULL > $SYSFSPATH || fail "Unable to set line pull in sysfs"
+}
+
+# Load the gpio-sim module. This will pull in configfs if needed too.
+modprobe gpio-sim || skip "unable to load the gpio-sim module"
+# Make sure configfs is mounted at /sys/kernel/config. Wait a bit if needed.
+for IDX in `seq 5`; do
+ if [ "$IDX" -eq "5" ]; then
+ skip "configfs not mounted at /sys/kernel/config"
+ fi
+
+ mountpoint -q /sys/kernel/config && break
+ sleep 0.1
+done
+# If the module was already loaded: remove all previous chips
+configfs_cleanup
+
+trap "exit 1" SIGTERM SIGINT
+trap configfs_cleanup EXIT
+
+echo "1. chip_name and dev_name attributes"
+
+echo "1.1. Chip name is communicated to user"
+create_chip chip
+enable_chip chip
+test -n `cat $CONFIGFS_DIR/chip/chip_name` || fail "chip_name doesn't work"
+remove_chip chip
+
+echo "1.2. chip_name returns 'none' if the chip is still pending"
+create_chip chip
+test "`cat $CONFIGFS_DIR/chip/chip_name`" = "none" || fail "chip_name doesn't return 'none' for a pending chip"
+remove_chip chip
+
+echo "1.3. Device name is communicated to user"
+create_chip chip
+enable_chip chip
+test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work"
+remove_chip chip
+
+echo "2. Creating and configuring simulated chips"
+
+echo "2.1. Default number of lines is 1"
+create_chip chip
+enable_chip chip
+test "`get_chip_num_lines chip`" = "1" || fail "default number of lines is not 1"
+remove_chip chip
+
+echo "2.2. Number of lines can be specified"
+create_chip chip
+set_num_lines chip 16
+enable_chip chip
+test "`get_chip_num_lines chip`" = "16" || fail "number of lines is not 16"
+remove_chip chip
+
+echo "2.3. Label can be set"
+create_chip chip
+set_label chip foobar
+enable_chip chip
+test "`get_chip_label chip`" = "foobar" || fail "label is incorrect"
+remove_chip chip
+
+echo "2.4. Label can be left empty"
+create_chip chip
+enable_chip chip
+test -z "`cat $CONFIGFS_DIR/chip/label`" || fail "label is not empty"
+remove_chip chip
+
+echo "2.5. Line names can be configured"
+create_chip chip
+set_num_lines chip 16
+set_line_name chip 0 foo
+set_line_name chip 2 bar
+enable_chip chip
+test "`get_line_name chip 0`" = "foo" || fail "line name is incorrect"
+test "`get_line_name chip 2`" = "bar" || fail "line name is incorrect"
+remove_chip chip
+
+echo "2.6. Line config can remain unused if offset is greater than number of lines"
+create_chip chip
+set_num_lines chip 2
+set_line_name chip 5 foobar
+enable_chip chip
+test "`get_line_name chip 0`" = "" || fail "line name is incorrect"
+test "`get_line_name chip 1`" = "" || fail "line name is incorrect"
+remove_chip chip
+
+echo "2.7. Line configfs directory names are sanitized"
+create_chip chip
+mkdir $CONFIGFS_DIR/chip/line12foobar 2> /dev/null && fail "invalid configfs line name accepted"
+mkdir $CONFIGFS_DIR/chip/line_no_offset 2> /dev/null && fail "invalid configfs line name accepted"
+remove_chip chip
+
+echo "2.8. Multiple chips can be created"
+CHIPS="chip0 chip1 chip2"
+for CHIP in $CHIPS; do
+ create_chip $CHIP
+ enable_chip $CHIP
+done
+for CHIP in $CHIPS; do
+ remove_chip $CHIP
+done
+
+echo "2.9. Can't modify settings when chip is live"
+create_chip chip
+enable_chip chip
+echo foobar > $CONFIGFS_DIR/chip/label 2> /dev/null && fail "Setting label of a live chip should fail"
+echo 8 > $CONFIGFS_DIR/chip/num_lines 2> /dev/null && fail "Setting number of lines of a live chip should fail"
+remove_chip chip
+
+echo "2.10. Can't create line items when chip is live"
+create_chip chip
+enable_chip chip
+mkdir $CONFIGFS_DIR/chip/line0 2> /dev/null && fail "Creating line item should fail"
+remove_chip chip
+
+echo "2.11. Probe errors are propagated to user-space"
+create_chip chip
+set_num_lines chip 99999
+echo 1 > $CONFIGFS_DIR/chip/live 2> /dev/null && fail "Probe error was not propagated"
+remove_chip chip
+
+echo "3. Controlling simulated chips"
+
+echo "3.1. Pull can be set over sysfs"
+create_chip chip
+set_num_lines chip 8
+enable_chip chip
+sysfs_set_pull chip 0 pull-up
+$BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip` 0
+test "$?" = "1" || fail "pull set incorrectly"
+sysfs_set_pull chip 0 pull-down
+$BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip` 1
+test "$?" = "0" || fail "pull set incorrectly"
+remove_chip chip
+
+echo "3.2. Pull can be read from sysfs"
+create_chip chip
+set_num_lines chip 8
+enable_chip chip
+SYSFS_PATH=/sys/devices/platform/`configfs_dev_name chip`/sim_gpio0/pull
+test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed"
+sysfs_set_pull chip 0 pull-up
+test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed"
+remove_chip chip
+
+echo "3.3. Incorrect input in sysfs is rejected"
+create_chip chip
+set_num_lines chip 8
+enable_chip chip
+SYSFS_PATH="/sys/devices/platform/`configfs_dev_name chip`/sim_gpio0/pull"
+echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected"
+remove_chip chip
+
+echo "3.4. Can't write to value"
+create_chip chip
+enable_chip chip
+SYSFS_PATH=/sys/devices/platform/`configfs_dev_name chip`/sim_gpio0/value
+echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly"
+remove_chip chip
+
+echo "4. Simulated GPIO chips are functional"
+
+echo "4.1. Values can be read from sysfs"
+create_chip chip
+set_num_lines chip 8
+enable_chip chip
+SYSFS_PATH="/sys/devices/platform/`configfs_dev_name chip`/sim_gpio0/value"
+test `cat $SYSFS_PATH` = "0" || fail "incorrect value read from sysfs"
+$BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip` 0 &
+sleep 0.1 # FIXME Any better way?
+test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs"
+kill $!
+remove_chip chip
+
+echo "4.2. Bias settings work correctly"
+create_chip chip
+set_num_lines chip 8
+enable_chip chip
+$BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip` 0
+test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work"
+remove_chip chip
+
+echo "GPIO $MODULE test PASS"
--
2.25.1
