Re: [PATCH v2] selftests/mincore: get readahead size for check_file_mmap()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ping...


On 4/3/21 2:38 PM, Jeffle Xu wrote:
> The readahead size used to be 2MB, thus it's reasonable to set the file
> size as 4MB when checking check_file_mmap().
> 
> However since commit c2e4cd57cfa1 ("block: lift setting the readahead
> size into the block layer"), readahead size could be as large as twice
> the io_opt, and thus the hardcoded file size no longer works.
> check_file_mmap() may report "Read-ahead pages reached the end of the
> file" when the readahead size actually exceeds the file size in this
> case.
> 
> Signed-off-by: Jeffle Xu <jefflexu@xxxxxxxxxxxxxxxxx>
> ---
> chnages since v1:
> - add the test name "mincore" in the subject line
> - add the error message in commit message
> - rename @filesize to @file_size to keep a more consistent naming
>   convention
> ---
>  .../selftests/mincore/mincore_selftest.c      | 57 +++++++++++++++----
>  1 file changed, 47 insertions(+), 10 deletions(-)
> 
> diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c
> index 5a1e85ff5d32..3ca542934080 100644
> --- a/tools/testing/selftests/mincore/mincore_selftest.c
> +++ b/tools/testing/selftests/mincore/mincore_selftest.c
> @@ -15,6 +15,11 @@
>  #include <string.h>
>  #include <fcntl.h>
>  #include <string.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <sys/ioctl.h>
> +#include <sys/sysmacros.h>
> +#include <sys/mount.h>
>  
>  #include "../kselftest.h"
>  #include "../kselftest_harness.h"
> @@ -195,10 +200,42 @@ TEST(check_file_mmap)
>  	int fd;
>  	int i;
>  	int ra_pages = 0;
> +	long ra_size, file_size;
> +	struct stat stats;
> +	dev_t devt;
> +	unsigned int major, minor;
> +	char devpath[32];
> +
> +	retval = stat(".", &stats);
> +	ASSERT_EQ(0, retval) {
> +		TH_LOG("Can't stat pwd: %s", strerror(errno));
> +	}
> +
> +	devt = stats.st_dev;
> +	major = major(devt);
> +	minor = minor(devt);
> +	snprintf(devpath, sizeof(devpath), "/dev/block/%u:%u", major, minor);
> +
> +	fd = open(devpath, O_RDONLY);
> +	ASSERT_NE(-1, fd) {
> +		TH_LOG("Can't open underlying disk %s", strerror(errno));
> +	}
> +
> +	retval = ioctl(fd, BLKRAGET, &ra_size);
> +	ASSERT_EQ(0, retval) {
> +		TH_LOG("Error ioctl with the underlying disk: %s", strerror(errno));
> +	}
> +
> +	/*
> +	 * BLKRAGET ioctl returns the readahead size in sectors (512 bytes).
> +	 * Make file_size large enough to contain the readahead window.
> +	 */
> +	ra_size *= 512;
> +	file_size = ra_size * 2;
>  
>  	page_size = sysconf(_SC_PAGESIZE);
> -	vec_size = FILE_SIZE / page_size;
> -	if (FILE_SIZE % page_size)
> +	vec_size = file_size / page_size;
> +	if (file_size % page_size)
>  		vec_size++;
>  
>  	vec = calloc(vec_size, sizeof(unsigned char));
> @@ -213,7 +250,7 @@ TEST(check_file_mmap)
>  			strerror(errno));
>  	}
>  	errno = 0;
> -	retval = fallocate(fd, 0, 0, FILE_SIZE);
> +	retval = fallocate(fd, 0, 0, file_size);
>  	ASSERT_EQ(0, retval) {
>  		TH_LOG("Error allocating space for the temporary file: %s",
>  			strerror(errno));
> @@ -223,12 +260,12 @@ TEST(check_file_mmap)
>  	 * Map the whole file, the pages shouldn't be fetched yet.
>  	 */
>  	errno = 0;
> -	addr = mmap(NULL, FILE_SIZE, PROT_READ | PROT_WRITE,
> +	addr = mmap(NULL, file_size, PROT_READ | PROT_WRITE,
>  			MAP_SHARED, fd, 0);
>  	ASSERT_NE(MAP_FAILED, addr) {
>  		TH_LOG("mmap error: %s", strerror(errno));
>  	}
> -	retval = mincore(addr, FILE_SIZE, vec);
> +	retval = mincore(addr, file_size, vec);
>  	ASSERT_EQ(0, retval);
>  	for (i = 0; i < vec_size; i++) {
>  		ASSERT_EQ(0, vec[i]) {
> @@ -240,14 +277,14 @@ TEST(check_file_mmap)
>  	 * Touch a page in the middle of the mapping. We expect the next
>  	 * few pages (the readahead window) to be populated too.
>  	 */
> -	addr[FILE_SIZE / 2] = 1;
> -	retval = mincore(addr, FILE_SIZE, vec);
> +	addr[file_size / 2] = 1;
> +	retval = mincore(addr, file_size, vec);
>  	ASSERT_EQ(0, retval);
> -	ASSERT_EQ(1, vec[FILE_SIZE / 2 / page_size]) {
> +	ASSERT_EQ(1, vec[file_size / 2 / page_size]) {
>  		TH_LOG("Page not found in memory after use");
>  	}
>  
> -	i = FILE_SIZE / 2 / page_size + 1;
> +	i = file_size / 2 / page_size + 1;
>  	while (i < vec_size && vec[i]) {
>  		ra_pages++;
>  		i++;
> @@ -271,7 +308,7 @@ TEST(check_file_mmap)
>  		}
>  	}
>  
> -	munmap(addr, FILE_SIZE);
> +	munmap(addr, file_size);
>  	close(fd);
>  	free(vec);
>  }
> 

-- 
Thanks,
Jeffle



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux