[PATCH bpf-next v2 0/5] selftests/bpf: xsk selftests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch set adds AF_XDP selftests based on veth to selftests/bpf.

# Topology:
# ---------
#                 -----------
#               _ | Process | _
#              /  -----------  \
#             /        |        \
#            /         |         \
#      -----------     |     -----------
#      | Thread1 |     |     | Thread2 |
#      -----------     |     -----------
#           |          |          |
#      -----------     |     -----------
#      |  xskX   |     |     |  xskY   |
#      -----------     |     -----------
#           |          |          |
#      -----------     |     ----------
#      |  vethX  | --------- |  vethY |
#      -----------   peer    ----------
#           |          |          |
#      namespaceX      |     namespaceY

These selftests test AF_XDP SKB and Native/DRV modes using veth Virtual
Ethernet interfaces.

The test program contains two threads, each thread is single socket with
a unique UMEM. It validates in-order packet delivery and packet content
by sending packets to each other.

Prerequisites setup by script test_xsk_prerequisites.sh:

   Set up veth interfaces as per the topology shown ^^:
   * setup two veth interfaces and one namespace
   ** veth<xxxx> in root namespace
   ** veth<yyyy> in af_xdp<xxxx> namespace
   ** namespace af_xdp<xxxx>
   * create a spec file veth.spec that includes this run-time configuration
     that is read by test scripts - filenames prefixed with test_xsk_
   *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
       conflict with any existing interface

The following tests are provided:

1. AF_XDP SKB mode
   Generic mode XDP is driver independent, used when the driver does
   not have support for XDP. Works on any netdevice using sockets and
   generic XDP path. XDP hook from netif_receive_skb().
   a. nopoll - soft-irq processing
   b. poll - using poll() syscall
   c. Socket Teardown
      Create a Tx and a Rx socket, Tx from one socket, Rx on another.
      Destroy both sockets, then repeat multiple times. Only nopoll mode
	  is used
   d. Bi-directional Sockets
      Configure sockets as bi-directional tx/rx sockets, sets up fill
	  and completion rings on each socket, tx/rx in both directions.
	  Only nopoll mode is used

2. AF_XDP DRV/Native mode
   Works on any netdevice with XDP_REDIRECT support, driver dependent.
   Processes packets before SKB allocation. Provides better performance
   than SKB. Driver hook available just after DMA of buffer descriptor.
   a. nopoll
   b. poll
   c. Socket Teardown
   d. Bi-directional Sockets
   * Only copy mode is supported because veth does not currently support
     zero-copy mode

Total tests: 8

Flow:
* Single process spawns two threads: Tx and Rx
* Each of these two threads attach to a veth interface within their
  assigned namespaces
* Each thread creates one AF_XDP socket connected to a unique umem
  for each veth interface
* Tx thread transmits 10k packets from veth<xxxx> to veth<yyyy>
* Rx thread verifies if all 10k packets were received and delivered
  in-order, and have the right content

v2 changes:
* Move selftests/xsk to selftests/bpf
* Remove Makefiles under selftests/xsk, and utilize selftests/bpf/Makefile

Structure of the patch set:

Patch 1: This patch adds XSK Selftests framework under selftests/bpf
Patch 2: Adds tests: SKB poll and nopoll mode, and mac-ip-udp debug
Patch 3: Adds tests: DRV poll and nopoll mode
Patch 4: Adds tests: SKB and DRV Socket Teardown
Patch 5: Adds tests: SKB and DRV Bi-directional Sockets

Thanks: Weqaar

Weqaar Janjua (5):
  selftests/bpf: xsk selftests framework
  selftests/bpf: xsk selftests - SKB POLL, NOPOLL
  selftests/bpf: xsk selftests - DRV POLL, NOPOLL
  selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV
  selftests/bpf: xsk selftests - Bi-directional Sockets - SKB, DRV

 tools/testing/selftests/bpf/Makefile          |   15 +-
 .../bpf/test_xsk_drv_bidirectional.sh         |   23 +
 .../selftests/bpf/test_xsk_drv_nopoll.sh      |   20 +
 .../selftests/bpf/test_xsk_drv_poll.sh        |   20 +
 .../selftests/bpf/test_xsk_drv_teardown.sh    |   20 +
 .../selftests/bpf/test_xsk_prerequisites.sh   |  127 ++
 .../bpf/test_xsk_skb_bidirectional.sh         |   20 +
 .../selftests/bpf/test_xsk_skb_nopoll.sh      |   20 +
 .../selftests/bpf/test_xsk_skb_poll.sh        |   20 +
 .../selftests/bpf/test_xsk_skb_teardown.sh    |   20 +
 tools/testing/selftests/bpf/xdpxceiver.c      | 1056 +++++++++++++++++
 tools/testing/selftests/bpf/xdpxceiver.h      |  158 +++
 tools/testing/selftests/bpf/xsk_env.sh        |   28 +
 tools/testing/selftests/bpf/xsk_prereqs.sh    |  119 ++
 14 files changed, 1664 insertions(+), 2 deletions(-)
 create mode 100755 tools/testing/selftests/bpf/test_xsk_drv_bidirectional.sh
 create mode 100755 tools/testing/selftests/bpf/test_xsk_drv_nopoll.sh
 create mode 100755 tools/testing/selftests/bpf/test_xsk_drv_poll.sh
 create mode 100755 tools/testing/selftests/bpf/test_xsk_drv_teardown.sh
 create mode 100755 tools/testing/selftests/bpf/test_xsk_prerequisites.sh
 create mode 100755 tools/testing/selftests/bpf/test_xsk_skb_bidirectional.sh
 create mode 100755 tools/testing/selftests/bpf/test_xsk_skb_nopoll.sh
 create mode 100755 tools/testing/selftests/bpf/test_xsk_skb_poll.sh
 create mode 100755 tools/testing/selftests/bpf/test_xsk_skb_teardown.sh
 create mode 100644 tools/testing/selftests/bpf/xdpxceiver.c
 create mode 100644 tools/testing/selftests/bpf/xdpxceiver.h
 create mode 100755 tools/testing/selftests/bpf/xsk_env.sh
 create mode 100755 tools/testing/selftests/bpf/xsk_prereqs.sh

-- 
2.20.1




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux