Re: [PATCH v2] memfd_secret.2: New page describing memfd_secret() system call

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 16, 2020 at 10:01:37PM +0100, Alejandro Colomar wrote:
> From: Mike Rapoport <rppt@xxxxxxxxxxxxx>
> 
> Signed-off-by: Mike Rapoport <rppt@xxxxxxxxxxxxx>
> Cowritten-by: Alejandro Colomar <alx.manpages@xxxxxxxxx>
> Acked-by: Alejandro Colomar <alx.manpages@xxxxxxxxx>
> Signed-off-by: Alejandro Colomar <alx.manpages@xxxxxxxxx>
> ---
> 
> Hi Mike,
> 
> I added that note about not having a wrapper,
> fixed a few minor formatting and wording issues,
> and sorted ERRORS alphabetically.

Thanks, Alejandro!

> Cheers,
> 
> Alex
> 
>  man2/memfd_secret.2 | 178 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 178 insertions(+)
>  create mode 100644 man2/memfd_secret.2
> 
> diff --git a/man2/memfd_secret.2 b/man2/memfd_secret.2
> new file mode 100644
> index 000000000..4e617aa0e
> --- /dev/null
> +++ b/man2/memfd_secret.2
> @@ -0,0 +1,178 @@
> +.\" Copyright (c) 2020, IBM Corporation.
> +.\" Written by Mike Rapoport <rppt@xxxxxxxxxxxxx>
> +.\"
> +.\" Based on memfd_create(2) man page
> +.\" Copyright (C) 2014 Michael Kerrisk <mtk.manpages@xxxxxxxxx>
> +.\" and Copyright (C) 2014 David Herrmann <dh.herrmann@xxxxxxxxx>
> +.\"
> +.\" %%%LICENSE_START(GPLv2+)
> +.\"
> +.\" This program is free software; you can redistribute it and/or modify
> +.\" it under the terms of the GNU General Public License as published by
> +.\" the Free Software Foundation; either version 2 of the License, or
> +.\" (at your option) any later version.
> +.\"
> +.\" This program is distributed in the hope that it will be useful,
> +.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
> +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +.\" GNU General Public License for more details.
> +.\"
> +.\" You should have received a copy of the GNU General Public
> +.\" License along with this manual; if not, see
> +.\" <http://www.gnu.org/licenses/>.
> +.\" %%%LICENSE_END
> +.\"
> +.TH MEMFD_SECRET 2 2020-08-02 Linux "Linux Programmer's Manual"
> +.SH NAME
> +memfd_secret \- create an anonymous file to map secret memory regions
> +.SH SYNOPSIS
> +.nf
> +.B #include <linux/secretmem.h>
> +.PP
> +.BI "int memfd_secret(unsigned long " flags ");"
> +.fi
> +.PP
> +.IR Note :
> +There is no glibc wrapper for this system call; see NOTES.
> +.SH DESCRIPTION
> +.BR memfd_secret ()
> +creates an anonymous file and returns a file descriptor that refers to it.
> +The file can only be memory-mapped;
> +the memory in such mapping
> +will have stronger protection than usual memory mapped files,
> +and so it can be used to store application secrets.
> +Unlike a regular file, a file created with
> +.BR memfd_secret ()
> +lives in RAM and has a volatile backing storage.
> +Once all references to the file are dropped, it is automatically released.
> +The initial size of the file is set to 0.
> +Following the call, the file size should be set using
> +.BR ftruncate (2).
> +.PP
> +The memory areas obtained with
> +.BR mmap (2)
> +from the file descriptor are exclusive to the owning context.
> +These areas are removed from the kernel page tables
> +and only the page table of the process holding the file descriptor
> +maps the corresponding physical memory.
> +.PP
> +The following values may be bitwise ORed in
> +.IR flags
> +to control the behavior of
> +.BR memfd_secret (2):
> +.TP
> +.BR FD_CLOEXEC
> +Set the close-on-exec flag on the new file descriptor.
> +See the description of the
> +.B O_CLOEXEC
> +flag in
> +.BR open (2)
> +for reasons why this may be useful.
> +.PP
> +.TP
> +.BR SECRETMEM_UNCACHED
> +In addition to excluding memory areas from the kernel page tables,
> +mark the memory mappings uncached in the page table of the owning process.
> +Such mappings can be used to prevent speculative loads
> +and cache-based side channels.
> +This mode of
> +.BR memfd_secret ()
> +is not supported on all architectures.
> +.PP
> +See also NOTES below.
> +.PP
> +As its return value,
> +.BR memfd_secret ()
> +returns a new file descriptor that can be used to refer to an anonymous file.
> +This file descriptor is opened for both reading and writing
> +.RB ( O_RDWR )
> +and
> +.B O_LARGEFILE
> +is set for the file descriptor.
> +.PP
> +With respect to
> +.BR fork (2)
> +and
> +.BR execve (2),
> +the usual semantics apply for the file descriptor created by
> +.BR memfd_secret ().
> +A copy of the file descriptor is inherited by the child produced by
> +.BR fork (2)
> +and refers to the same file.
> +The file descriptor is preserved across
> +.BR execve (2),
> +unless the close-on-exec flag has been set.
> +.PP
> +The memory regions backed with
> +.BR memfd_secret ()
> +are locked in the same way as
> +.BR mlock (2),
> +however the implementation will not try to
> +populate the whole range during the
> +.BR mmap ()
> +call.
> +The amount of memory allowed for memory mappings
> +of the file descriptor obeys the same rules as
> +.BR mlock (2)
> +and cannot exceed
> +.BR RLIMIT_MEMLOCK .
> +.SH RETURN VALUE
> +On success,
> +.BR memfd_secret ()
> +returns a new file descriptor.
> +On error, \-1 is returned and
> +.I errno
> +is set to indicate the error.
> +.SH ERRORS
> +.TP
> +.B EINVAL
> +.I flags
> +included unknown bits.
> +.TP
> +.B EMFILE
> +The per-process limit on the number of open file descriptors has been reached.
> +.TP
> +.B EMFILE
> +The system-wide limit on the total number of open files has been reached.
> +.TP
> +.B ENOMEM
> +There was insufficient memory to create a new anonymous file.
> +.TP
> +.B ENOSYS
> +.BR memfd_secret ()
> +is not implemented on this architecture.
> +.SH VERSIONS
> +The
> +.BR memfd_secret (2)
> +system call first appeared in Linux 5.X;
> +.SH CONFORMING TO
> +The
> +.BR memfd_secret (2)
> +system call is Linux-specific.
> +.SH NOTES
> +The
> +.BR memfd_secret (2)
> +system call provides an ability to hide information
> +from the operating system.
> +Normally Linux userspace mappings are protected from other users,
> +but they are visible to privileged code.
> +The mappings created using
> +.BR memfd_secret ()
> +are hidden from the kernel as well.
> +.PP
> +If an architecture supports
> +.BR SECRETMEM_UNCACHED ,
> +the mappings also have protection from speculative execution vulnerabilties,
> +at the expense of increased memory access latency.
> +Care should be taken when using
> +.B SECRETMEM_UNCACHED
> +to avoid degrading application performance.
> +.PP
> +Glibc does not provide a wrapper for this system call; call it using
> +.BR syscall (2).
> +.SH SEE ALSO
> +.BR fcntl (2),
> +.BR ftruncate (2),
> +.BR mlock (2),
> +.BR mmap (2),
> +.BR setrlimit (2)
> -- 
> 2.29.2
> 

-- 
Sincerely yours,
Mike.



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux