Re: [PATCH v3 00/19] Introduce partial kernel_read_file() support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mimi,

On 2020-07-28 11:48 a.m., Mimi Zohar wrote:
> On Mon, 2020-07-27 at 12:18 -0700, Scott Branden wrote:
>> Hi Mimi/Kees,
>>
>> On 2020-07-27 4:16 a.m., Mimi Zohar wrote:
>>> On Fri, 2020-07-24 at 14:36 -0700, Kees Cook wrote:
>>>> v3:
>>>> - add reviews/acks
>>>> - add "IMA: Add support for file reads without contents" patch
>>>> - trim CC list, in case that's why vger ignored v2
>>>> v2: [missing from lkml archives! (CC list too long?) repeating changes
>> here]
>>>> - fix issues in firmware test suite
>>>> - add firmware partial read patches
>>>> - various bug fixes/cleanups
>>>> v1: 
>> https://lore.kernel.org/lkml/20200717174309.1164575-1-keescook@xxxxxxxxxxxx/
>>>> Hi,
>>>>
>>>> Here's my tree for adding partial read support in kernel_read_file(),
>>>> which fixes a number of issues along the way. It's got Scott's firmware
>>>> and IMA patches ported and everything tests cleanly for me (even with
>>>> CONFIG_IMA_APPRAISE=y).
>>> Thanks, Kees.  Other than my comments on the new
>>> security_kernel_post_load_data() hook, the patch set is really nice.
>>>
>>> In addition to compiling with CONFIG_IMA_APPRAISE enabled, have you
>>> booted the kernel with the ima_policy=tcb?  The tcb policy will add
>>> measurements to the IMA measurement list and extend the TPM with the
>>> file or buffer data digest.  Are you seeing the firmware measurements,
>>> in particular the partial read measurement?
>> I booted the kernel with ima_policy=tcb.
>>
>> Unfortunately after enabling the following, fw_run_tests.sh does not run.
>>
>> mkdir /sys/kernel/security
>> mount -t securityfs securityfs /sys/kernel/security
>> echo "measure func=FIRMWARE_CHECK" > /sys/kernel/security/ima/policy
>> echo "appraise func=FIRMWARE_CHECK appraise_type=imasig" >
>> /sys/kernel/security/ima/policy
>> ./fw_run_tests.sh
>>
>> [ 1296.258052] test_firmware: loading 'test-firmware.bin'
>> [ 1296.263903] misc test_firmware: loading /lib/firmware/test-firmware.bin
>> failed with error -13
>> [ 1296.263905] audit: type=1800 audit(1595905754.266:9): pid=5696 uid=0
>> auid=4294967295 ses=4294967295 subj=kernel op=appraise_data cause=IMA-
>> signature-required comm="fw_namespace" name="/lib/firmware/test-firmware.bin"
>> dev="tmpfs" ino=4592 res=0
>> [ 1296.297085] misc test_firmware: Direct firmware load for test-firmware.bin
>> failed with error -13
>> [ 1296.305947] test_firmware: load of 'test-firmware.bin' failed: -13
> The "appraise" rule verifies the IMA signature.  Unless you signed the firmware
> (evmctl) and load the public key on the IMA keyring, that's to be expected.  I
> assume you are seeing firmware measurements in the IMA measuremenet log.
Yes, I see the firmware measurements in the IMA measurement log.
I have not signed the firmware nor loaded a public key on the IMA keyring.
Therefore everything is working as expected.
>
> Mimi
>
Thanks,
 Scott



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux