Re: [PATCH] torture: Pass --kmake-arg to all make invocations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 16, 2020 at 07:57:20PM +0200, Marco Elver wrote:
> On Tue, Jun 16 2020 at 10:42AM -0700, Paul E. McKenney wrote:
> > On Tue, Jun 16, 2020 at 06:42:02PM +0200, Marco Elver wrote:
> > > On Tue, Jun 16 2020 at 09:05AM -0700, Paul E. McKenney wrote:
> > > > On Tue, Jun 16, 2020 at 11:49:24AM +0200, Marco Elver wrote:
> > > > > We need to pass the arguments provided to --kmake-arg to all make
> > > > > invocations. In particular, the make invocations generating the configs
> > > > > need to see the final make arguments, e.g. if config variables depend on
> > > > > particular variables that are passed to make.
> > > > > 
> > > > > For example, when using '--kcsan --kmake-arg CC=clang-11', we would lose
> > > > > CONFIG_KCSAN=y due to 'make oldconfig' not seeing that we want to use a
> > > > > compiler that supports KCSAN.
> > > > > 
> > > > > Signed-off-by: Marco Elver <elver@xxxxxxxxxx>
> > > > 
> > > > Queued and pushed, thank you!
> > > > 
> > > > Would the following patch make sense, at least until such time
> > > > as some other compiler supports KCSAN?
> > > > 
> > > > 							Thanx, Paul
> > > > 
> > > > ------------------------------------------------------------------------
> > > > 
> > > > commit 88bcaa730b6d40ddf69b09ed6f0a14803d087d99
> > > > Author: Paul E. McKenney <paulmck@xxxxxxxxxx>
> > > > Date:   Tue Jun 16 09:02:34 2020 -0700
> > > > 
> > > >     torture: Make --kcsan default to using Clang 11
> > > >     
> > > >     Currently, Clang 11 is the only compiler that can support KCSAN.
> > > >     Therefore, as a convenience to the KCSAN user, this commit causes
> > > >     --kcsan to specify Clang 11 unless a "CC=" argument was already
> > > >     specified via the --kmake-arg argument.
> > > 
> > > As soon as more compilers support KCSAN (e.g. clang-12, etc...) we run
> > > the risk of actually inconveniencing ourselves more because then we
> > > really need to say '--kmake-arg CC=clang-1X' to not use the old
> > > compiler. Or revert this in time.
> > > 
> > > My command-line looks more like this right now:
> > > 
> > > 	kvm.sh ... --kmake-arg "CC="${HOME}/local/<gcc-or-clang>-11.kcsan/local/bin/<gcc-or-clang>" ...
> > > 
> > > I think the safer alternative would be to error if CONFIG_KCSAN=y is not
> > > in the config, and simply suggest "Did you forget to switch your
> > > compiler with '--kmake-arg CC=<cc-that-supports-kcsan>'?" (of course, a
> > > 'gcc' in $PATH that supports KCSAN would also be fine -- see below).
> > > Eventually, when the default compilers support KCSAN, this will resolve
> > > itself gracefully.
> > > 
> > > Also, I'm going to send a series later this week to re-enable GCC
> > > support. ;-)
> > 
> > OK, sounds like I should leave well enough alone, then.  ;-)
> > 
> > In its current state, specifying "--kcsan" without a KCSAN-capable
> > compiler does get you this:
> > 
> > :CONFIG_KCSAN=y: improperly set
> > :CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
> > :CONFIG_KCSAN_VERBOSE=y: improperly set
> > :CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
> > Clean KCSAN run in /home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2020.06.16-09.53.16
> > 
> > Which admittedly is a bit obtuse, especially that last line.  So how
> > about the following patch, which instead results in this?
> > 
> > :CONFIG_KCSAN=y: improperly set
> > :CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
> > :CONFIG_KCSAN_VERBOSE=y: improperly set
> 
> Noticed that CONFIG_KCSAN_VERBOSE=y warning still appears, because it
> wants CONFIG_PROVE_LOCKING=y.
> 
> > :CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
> > Did you forget to switch your compiler with --kmake-arg CC=<cc-that-supports-kcsan>?
> 
> Sounds good, with another suggestion below, but otherwise
> 
> Acked-by: Marco Elver <elver@xxxxxxxxxx>

Applied and updated as suggested below, so that the output now looks
like this:

:CONFIG_KCSAN=y: improperly set
:CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
:CONFIG_KCSAN_VERBOSE=y: improperly set
:CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
Compiler or architecture does not support KCSAN!
Did you forget to switch your compiler with --kmake-arg CC=<cc-that-supports-kcsan>?

And agreed, much better!

							Thanx, Paul

> Thanks,
> -- Marco
> 
> > 							Thanx, Paul
> > 
> > ------------------------------------------------------------------------
> > 
> > commit f571795b1146007407851675a258b6685ea2d589
> > Author: Paul E. McKenney <paulmck@xxxxxxxxxx>
> > Date:   Tue Jun 16 10:38:57 2020 -0700
> > 
> >     torture: Improve diagnostic for KCSAN-incapable compilers
> >     
> >     Using --kcsan when the compiler does not support KCSAN results in this:
> >     
> >     :CONFIG_KCSAN=y: improperly set
> >     :CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
> >     :CONFIG_KCSAN_VERBOSE=y: improperly set
> >     :CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
> >     Clean KCSAN run in /home/git/linux-rcu/tools/testing/selftests/rcutorture/res/2020.06.16-09.53.16
> >     
> >     This is a bit obtuse, so this commit adds checks resulting in this:
> >     
> >     :CONFIG_KCSAN=y: improperly set
> >     :CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000: improperly set
> >     :CONFIG_KCSAN_VERBOSE=y: improperly set
> >     :CONFIG_KCSAN_INTERRUPT_WATCHER=y: improperly set
> >     Did you forget to switch your compiler with --kmake-arg CC=<cc-that-supports-kcsan>?
> >     
> >     Suggested-by: Marco Elver <elver@xxxxxxxxxx>
> >     Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxx>
> > 
> > diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
> > index 357899c..837643a 100755
> > --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
> > +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
> > @@ -44,7 +44,8 @@ do
> >  			then
> >  				echo QEMU killed
> >  			fi
> > -			configcheck.sh $i/.config $i/ConfigFragment
> > +			configcheck.sh $i/.config $i/ConfigFragment > $T 2>&1
> > +			cat $T
> >  			if test -r $i/Make.oldconfig.err
> >  			then
> >  				cat $i/Make.oldconfig.err
> > @@ -73,7 +74,10 @@ do
> >  	done
> >  	if test -f "$rd/kcsan.sum"
> >  	then
> > -		if test -s "$rd/kcsan.sum"
> > +		if grep -q CONFIG_KCSAN=y $T
> > +		then
> 
> For completeness, could add this above:
> 
> 	echo "Compiler or architecture does not support KCSAN!"
> 
> Because we might also be on an unsupported architecture.
> 
> > +			echo Did you forget to switch your compiler with '--kmake-arg CC=<cc-that-supports-kcsan>'?
> > +		elif test -s "$rd/kcsan.sum"
> >  		then
> >  			echo KCSAN summary in $rd/kcsan.sum
> >  		else



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux