On Tue, Jun 09, 2020 at 06:02:08AM -0700, trix@xxxxxxxxxx wrote:
> From: Tom Rix <trix@xxxxxxxxxx>
>
> Check that the ioctl DFL_FPGA_PORT_ERR_GET_IRQ_NUM returns
> an expected result.
>
> Tested on vf device 0xbcc1
>
> Sample run with
> $ sudo make -C tools/testing/selftests TARGETS=drivers/fpga run_tests
> ...
> ok 1 selftests: drivers/fpga: afu_intr
>
> Signed-off-by: Tom Rix <trix@xxxxxxxxxx>
> ---
> tools/testing/selftests/Makefile | 1 +
> tools/testing/selftests/drivers/fpga/Makefile | 9 +++++
> .../testing/selftests/drivers/fpga/afu_intr.c | 38 +++++++++++++++++++
> tools/testing/selftests/drivers/fpga/config | 1 +
> 4 files changed, 49 insertions(+)
> create mode 100644 tools/testing/selftests/drivers/fpga/Makefile
> create mode 100644 tools/testing/selftests/drivers/fpga/afu_intr.c
> create mode 100644 tools/testing/selftests/drivers/fpga/config
>
> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
> index 1195bd85af38..4c6eda659125 100644
> --- a/tools/testing/selftests/Makefile
> +++ b/tools/testing/selftests/Makefile
> @@ -9,6 +9,7 @@ TARGETS += clone3
> TARGETS += cpufreq
> TARGETS += cpu-hotplug
> TARGETS += drivers/dma-buf
> +TARGETS += drivers/fpga
> TARGETS += efivarfs
> TARGETS += exec
> TARGETS += filesystems
> diff --git a/tools/testing/selftests/drivers/fpga/Makefile b/tools/testing/selftests/drivers/fpga/Makefile
> new file mode 100644
> index 000000000000..0a472e8c67c5
> --- /dev/null
> +++ b/tools/testing/selftests/drivers/fpga/Makefile
> @@ -0,0 +1,9 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +CFLAGS += -I../../../../../usr/include/
> +CFLAGS += -I../../../../../include/uapi/
> +
> +TEST_GEN_PROGS := afu_intr
> +
> +top_srcdir ?=../../../../..
> +
> +include ../../lib.mk
> diff --git a/tools/testing/selftests/drivers/fpga/afu_intr.c b/tools/testing/selftests/drivers/fpga/afu_intr.c
> new file mode 100644
> index 000000000000..aa1efba94605
> --- /dev/null
> +++ b/tools/testing/selftests/drivers/fpga/afu_intr.c
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <stdint.h>
> +#include <string.h>
> +#include <linux/fcntl.h>
> +#include <linux/fpga-dfl.h>
> +
> +#define TEST_PREFIX "drivers/fpga/afu_intr"
> +
> +int main(int argc, char *argv[])
> +{
> + int devfd, status;
> + struct dfl_fpga_port_info port_info;
> + uint32_t irq_num;
> +
> + devfd = open("/dev/dfl-port.0", O_RDONLY);
> + if (devfd < 0) {
> + printf("%s: [skip,no-ufpgaintr]\n", TEST_PREFIX);
> + exit(77);
> + }
> +
> + /*
> + * From fpga-dl.h :
> + * Currently hardware supports up to 1 irq.
> + * Return: 0 on success, -errno on failure.
> + */
> + irq_num = -1;
> + status = ioctl(devfd, DFL_FPGA_PORT_ERR_GET_IRQ_NUM, &irq_num);
> + if (status != 0 || irq_num > 255) {
> + printf("%s: [FAIL,err-get-irq-num]\n", TEST_PREFIX);
> + close(devfd);
> + exit(1);
> + }
> +
> + close(devfd);
> + return 0;
> +}
Why not use the ksft_* functions and frameworks to properly print out
the test status and results so that tools can correctly parse it?
It's generally bad-form to make up your own format.
thanks,
gre gk-h
