From: Toke Høiland-Jørgensen <toke@xxxxxxxxxx> To make sure no new files are introduced that doesn't include the bpf/ prefix in its #include, remove tools/lib/bpf from the include path entirely. Instead, we introduce a new header files directory under the scratch tools/ dir, and add a rule to run the 'install_headers' rule from libbpf to have a full set of consistent libbpf headers in $(OUTPUT)/tools/include/bpf, and then use $(OUTPUT)/tools/include as the include path for selftests. For consistency we also make sure we put all the scratch build files from other bpftool and libbpf into tools/build/, so everything stays within selftests/. Signed-off-by: Toke Høiland-Jørgensen <toke@xxxxxxxxxx> --- tools/testing/selftests/bpf/.gitignore | 1 + tools/testing/selftests/bpf/Makefile | 50 +++++++++++++++++++------------- 2 files changed, 31 insertions(+), 20 deletions(-) diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore index 1d14e3ab70be..849be9990ad2 100644 --- a/tools/testing/selftests/bpf/.gitignore +++ b/tools/testing/selftests/bpf/.gitignore @@ -40,3 +40,4 @@ test_cpp /bpf_gcc /tools bpf_helper_defs.h +/include/bpf diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 1fd7da49bd56..c3fa695bb028 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -20,8 +20,8 @@ CLANG ?= clang LLC ?= llc LLVM_OBJCOPY ?= llvm-objcopy BPF_GCC ?= $(shell command -v bpf-gcc;) -CFLAGS += -g -Wall -O2 $(GENFLAGS) -I$(CURDIR) -I$(APIDIR) -I$(LIBDIR) \ - -I$(BPFDIR) -I$(GENDIR) -I$(TOOLSINCDIR) \ +CFLAGS += -g -Wall -O2 $(GENFLAGS) -I$(CURDIR) -I$(APIDIR) \ + -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR) -I$(TOOLSINCDIR) \ -Dbpf_prog_load=bpf_prog_test_load \ -Dbpf_load_program=bpf_test_load_program LDLIBS += -lcap -lelf -lz -lrt -lpthread @@ -97,11 +97,15 @@ OVERRIDE_TARGETS := 1 override define CLEAN $(call msg,CLEAN) $(RM) -r $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(EXTRA_CLEAN) - $(MAKE) -C $(BPFDIR) OUTPUT=$(OUTPUT)/ clean endef include ../lib.mk +SCRATCH_DIR := $(OUTPUT)/tools +BUILD_DIR := $(SCRATCH_DIR)/build +INCLUDE_DIR := $(SCRATCH_DIR)/include +INCLUDE_BPF := $(INCLUDE_DIR)/bpf/bpf.h + # Define simple and short `make test_progs`, `make test_sysctl`, etc targets # to build individual tests. # NOTE: Semicolon at the end is critical to override lib.mk's default static @@ -120,7 +124,7 @@ $(OUTPUT)/urandom_read: urandom_read.c $(call msg,BINARY,,$@) $(CC) -o $@ $< -Wl,--build-id -$(OUTPUT)/test_stub.o: test_stub.c +$(OUTPUT)/test_stub.o: test_stub.c $(INCLUDE_BPF) $(call msg,CC,,$@) $(CC) -c $(CFLAGS) -o $@ $< @@ -129,7 +133,7 @@ $(OUTPUT)/runqslower: force $(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/runqslower \ OUTPUT=$(CURDIR)/tools/ VMLINUX_BTF=$(abspath ../../../../vmlinux) -BPFOBJ := $(OUTPUT)/libbpf.a +BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ) @@ -155,17 +159,23 @@ force: DEFAULT_BPFTOOL := $(OUTPUT)/tools/sbin/bpftool BPFTOOL ?= $(DEFAULT_BPFTOOL) -$(DEFAULT_BPFTOOL): force - $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \ +$(BUILD_DIR)/libbpf $(BUILD_DIR)/bpftool $(INCLUDE_DIR): + $(call msg,MKDIR,,$@) + mkdir -p $@ + +$(DEFAULT_BPFTOOL): force $(BUILD_DIR)/bpftool + $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \ + OUTPUT=$(BUILD_DIR)/bpftool/ \ prefix= DESTDIR=$(OUTPUT)/tools/ install -$(BPFOBJ): force - $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(OUTPUT)/ +$(BPFOBJ): force $(BUILD_DIR)/libbpf + $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \ + OUTPUT=$(BUILD_DIR)/libbpf/ -BPF_HELPERS := $(OUTPUT)/bpf_helper_defs.h $(wildcard $(BPFDIR)/bpf_*.h) -$(OUTPUT)/bpf_helper_defs.h: $(BPFOBJ) - $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \ - OUTPUT=$(OUTPUT)/ $(OUTPUT)/bpf_helper_defs.h +BPF_HELPERS := $(wildcard $(BPFDIR)/bpf_*.h) $(INCLUDE_BPF) +$(INCLUDE_BPF): force $(BPFOBJ) + $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) install_headers \ + OUTPUT=$(BUILD_DIR)/libbpf/ DESTDIR=$(SCRATCH_DIR) prefix= # Get Clang's default includes on this system, as opposed to those seen by # '-target bpf'. This fixes "missing" files on some architectures/distros, @@ -185,8 +195,8 @@ MENDIAN=$(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian) CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG)) BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) $(MENDIAN) \ - -I$(OUTPUT) -I$(CURDIR) -I$(CURDIR)/include/uapi \ - -I$(APIDIR) -I$(LIBDIR) -I$(BPFDIR) -I$(abspath $(OUTPUT)/../usr/include) + -I$(INCLUDE_DIR) -I$(CURDIR) -I$(CURDIR)/include/uapi \ + -I$(APIDIR) -I$(abspath $(OUTPUT)/../usr/include) CLANG_CFLAGS = $(CLANG_SYS_INCLUDES) \ -Wno-compare-distinct-pointer-types @@ -306,7 +316,7 @@ $(TRUNNER_TEST_OBJS): $(TRUNNER_OUTPUT)/%.test.o: \ $(TRUNNER_EXTRA_HDRS) \ $(TRUNNER_BPF_OBJS) \ $(TRUNNER_BPF_SKELS) \ - $$(BPFOBJ) | $(TRUNNER_OUTPUT) + $$(BPFOBJ) $$(INCLUDE_BPF) | $(TRUNNER_OUTPUT) $$(call msg,TEST-OBJ,$(TRUNNER_BINARY),$$@) cd $$(@D) && $$(CC) $$(CFLAGS) -c $(CURDIR)/$$< $$(LDLIBS) -o $$(@F) @@ -314,7 +324,7 @@ $(TRUNNER_EXTRA_OBJS): $(TRUNNER_OUTPUT)/%.o: \ %.c \ $(TRUNNER_EXTRA_HDRS) \ $(TRUNNER_TESTS_HDR) \ - $$(BPFOBJ) | $(TRUNNER_OUTPUT) + $$(BPFOBJ) $$(INCLUDE_BPF) | $(TRUNNER_OUTPUT) $$(call msg,EXT-OBJ,$(TRUNNER_BINARY),$$@) $$(CC) $$(CFLAGS) -c $$< $$(LDLIBS) -o $$@ @@ -326,7 +336,7 @@ ifneq ($2,) endif $(OUTPUT)/$(TRUNNER_BINARY): $(TRUNNER_TEST_OBJS) \ - $(TRUNNER_EXTRA_OBJS) $$(BPFOBJ) \ + $(TRUNNER_EXTRA_OBJS) $$(BPFOBJ) $$(INCLUDE_BPF) \ | $(TRUNNER_BINARY)-extras $$(call msg,BINARY,,$$@) $$(CC) $$(CFLAGS) $$(filter %.a %.o,$$^) $$(LDLIBS) -o $$@ @@ -388,7 +398,7 @@ $(OUTPUT)/test_cpp: test_cpp.cpp $(OUTPUT)/test_core_extern.skel.h $(BPFOBJ) $(call msg,CXX,,$@) $(CXX) $(CFLAGS) $^ $(LDLIBS) -o $@ -EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) \ +EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) \ prog_tests/tests.h map_tests/tests.h verifier/tests.h \ feature \ - $(addprefix $(OUTPUT)/,*.o *.skel.h no_alu32 bpf_gcc tools) + $(addprefix $(OUTPUT)/,*.o *.skel.h no_alu32 bpf_gcc)
