Verify that in this scenario
------------------------ N2
| |
------ ------ N3 ----
| R1 | | R2 |------|H2|
------ ------ ----
| |
------------------------ N1
|
----
|H1|
----
where H1's default route goes through R1 and R1's default route goes
through R2 over N2, traceroute6 from H1 to H2 reports R2's address
on N2 and not N1.
Signed-off-by: Francesco Ruggeri <fruggeri@xxxxxxxxxx>
---
tools/testing/selftests/net/Makefile | 1 +
.../testing/selftests/net/icmp6_reply_addr.sh | 159 ++++++++++++++++++
2 files changed, 160 insertions(+)
create mode 100755 tools/testing/selftests/net/icmp6_reply_addr.sh
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 0bd6b23c97ef..daeaeb59d5ca 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -11,6 +11,7 @@ TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh
TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh
TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh
TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh
+TEST_PROGS += icmp6_reply_addr.sh
TEST_PROGS_EXTENDED := in_netns.sh
TEST_GEN_FILES = socket nettest
TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any
diff --git a/tools/testing/selftests/net/icmp6_reply_addr.sh b/tools/testing/selftests/net/icmp6_reply_addr.sh
new file mode 100755
index 000000000000..551834cb9272
--- /dev/null
+++ b/tools/testing/selftests/net/icmp6_reply_addr.sh
@@ -0,0 +1,159 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Verify that in this scenario
+#
+# ------------------------ N2
+# | |
+# ------ ------ N3 ----
+# | R1 | | R2 |------|H2|
+# ------ ------ ----
+# | |
+# ------------------------ N1
+# |
+# ----
+# |H1|
+# ----
+#
+# where H1's default route goes through R1 and R1's default route goes
+# through R2 over N2, traceroute6 from H1 to H2 reports R2's address
+# on N2 and not N1.
+#
+# Addresses are assigned as follows:
+#
+# N1: 2000:101::/64
+# N2: 2000:102::/64
+# N3: 2000:103::/64
+#
+# R1's host part of address: 1
+# R2's host part of address: 2
+# H1's host part of address: 3
+# H2's host part of address: 4
+#
+# For example:
+# the IPv6 address of R1's interface on N2 is 2000:102::1/64
+
+####################################################################
+# helpers
+#
+# Interface on network <net> in node <node> is called <node><net>
+#
+
+node()
+{
+ host=$1
+ shift
+ ip netns exec ${host} $*
+}
+
+create_nodes()
+{
+ for n in $*; do
+ ip netns add $n
+ node $n ip link set lo up
+ done
+}
+
+delete_nodes()
+{
+ for n in $*; do
+ ip netns del $n
+ done
+}
+
+create_veth_net()
+{
+ net=$1
+ h1=$2
+ h2=$3
+
+ ip link add ${h1}${net} type veth peer name ${h2}${net}
+ ip link set ${h1}${net} netns ${h1}
+ node ${h1} ip link set ${h1}${net} up
+ ip link set ${h2}${net} netns ${h2}
+ node ${h2} ip link set ${h2}${net} up
+}
+
+create_macvlan_net()
+{
+ net=$1
+ shift
+ nodes=$*
+
+ ip link add ${net} type dummy
+ ip link set ${net} up
+
+ for n in ${nodes}; do
+ ip link add link ${net} dev ${n}${net} type macvlan mode bridge
+ ip link set ${n}${net} netns $n
+ node ${n} ip link set ${n}${net} up
+ done
+}
+
+delete_macvlan_nets()
+{
+ nets=$*
+
+ for n in ${nets}; do
+ ip link del ${n}
+ done
+}
+
+# end helpers
+####################################################################
+
+if [ "$(id -u)" -ne 0 ]; then
+ echo "SKIP: Need root privileges"
+ exit 0
+fi
+
+if [ ! -x "$(command -v traceroute6)" ]; then
+ echo "SKIP: Could not run test without traceroute6"
+ exit 0
+fi
+
+create_nodes host1 host2 rtr1 rtr2
+
+create_macvlan_net net1 host1 rtr1 rtr2
+create_veth_net net2 rtr1 rtr2
+create_veth_net net3 rtr2 host2
+
+# Configure interfaces and routes in host1
+node host1 ip -6 addr add 2000:101::3/64 dev host1net1
+node host1 ip -6 route add default via 2000:101::1
+
+# Configure interfaces and routes in rtr1
+node rtr1 ip -6 addr add 2000:101::1/64 dev rtr1net1
+node rtr1 ip -6 addr add 2000:102::1/64 dev rtr1net2
+node rtr1 ip -6 route add default via 2000:102::2
+node rtr1 sysctl net.ipv6.conf.all.forwarding=1 >/dev/null
+
+# Configure interfaces and routes in rtr2
+node rtr2 ip -6 addr add 2000:101::2/64 dev rtr2net1
+node rtr2 ip -6 addr add 2000:102::2/64 dev rtr2net2
+node rtr2 ip -6 addr add 2000:103::2/64 dev rtr2net3
+node rtr2 sysctl net.ipv6.conf.all.forwarding=1 >/dev/null
+
+# Configure interfaces and routes in host2
+node host2 ip -6 addr add 2000:103::4/64 dev host2net3
+node host2 ip -6 route add default via 2000:103::2
+
+# Ping host2 from host1
+echo "Priming the network"
+node host1 ping6 -c5 2000:103::4 >/dev/null
+
+# Traceroute host2 from host1
+echo "Running traceroute6"
+if node host1 traceroute6 2000:103::4 | grep -q 2000:102::2; then
+ ret=0
+ echo "Found 2000:102::2. Test passed."
+else
+ ret=1
+ echo "Did not find 2000:102::2. Test failed."
+fi
+
+delete_macvlan_nets net1
+delete_nodes host1 host2 rtr1 rtr2
+
+exit ${ret}
+
--
2.19.1
