Re: [PATCH v5 00/10] Support using MSI interrupts in ntb_transport

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 23, 2019 at 04:30:50PM -0600, Logan Gunthorpe wrote:
> This is another resend as there has been no feedback since v4.
> Seems Jon has been MIA this past cycle so hopefully he appears on the
> list soon.
> 
> I've addressed the feedback so far and rebased on the latest kernel
> and would like this to be considered for merging this cycle.
> 
> The only outstanding issue I know of is that it still will not work
> with IDT hardware, but ntb_transport doesn't work with IDT hardware
> and there is still no sensible common infrastructure to support
> ntb_peer_mw_set_trans(). Thus, I decline to consider that complication
> in this patchset. However, I'll be happy to review work that adds this
> feature in the future.
> 
> Also, as the port number and resource index stuff is a bit complicated,
> I made a quick out of tree test fixture to ensure it's correct[1]. As
> an excerise I also wrote some test code[2] using the upcomming KUnit
> feature.

Sorry for the delay.  The patch is now in the ntb-next branch.  We've
missed window for 5.2, but it will be in the 5.3 pull request (barring
last minute comments).

Thanks,
Jon

> 
> Logan
> 
> [1] https://repl.it/repls/ExcitingPresentFile
> [2] https://github.com/sbates130272/linux-p2pmem/commits/ntb_kunit
> 
> --
> 
> Changes in v5:
> 
> * Rebased onto v5.2-rc1 (plus the patches in ntb-next)
> 
> --
> 
> Changes in v4:
> 
> * Rebased onto v5.1-rc6 (No changes)
> 
> * Numerous grammar and spelling mistakes spotted by Bjorn
> 
> --
> 
> Changes in v3:
> 
> * Rebased onto v5.1-rc1 (Dropped the first two patches as they have
>   been merged, and cleaned up some minor conflicts in the PCI tree)
> 
> * Added a new patch (#3) to calculate logical port numbers that
>   are port numbers from 0 to (number of ports - 1). This is
>   then used in ntb_peer_resource_idx() to fix the issues brought
>   up by Serge.
> 
> * Fixed missing __iomem and iowrite calls (as noticed by Serge)
> 
> * Added patch 10 which describes ntb_msi_test in the documentation
>   file (as requested by Serge)
> 
> * A couple other minor nits and documentation fixes
> 
> --
> 
> Changes in v2:
> 
> * Cleaned up the changes in intel_irq_remapping.c to make them
>   less confusing and add a comment. (Per discussion with Jacob and
>   Joerg)
> 
> * Fixed a nit from Bjorn and collected his Ack
> 
> * Added a Kconfig dependancy on CONFIG_PCI_MSI for CONFIG_NTB_MSI
>   as the Kbuild robot hit a random config that didn't build
>   without it.
> 
> * Worked in a callback for when the MSI descriptor changes so that
>   the clients can resend the new address and data values to the peer.
>   On my test system this was never necessary, but there may be
>   other platforms where this can occur. I tested this by hacking
>   in a path to rewrite the MSI descriptor when I change the cpu
>   affinity of an IRQ. There's a bit of uncertainty over the latency
>   of the change, but without hardware this can acctually occur on
>   we can't test this. This was the result of a discussion with Dave.
> 
> --
> 
> This patch series adds optional support for using MSI interrupts instead
> of NTB doorbells in ntb_transport. This is desirable seeing doorbells on
> current hardware are quite slow and therefore switching to MSI interrupts
> provides a significant performance gain. On switchtec hardware, a simple
> apples-to-apples comparison shows ntb_netdev/iperf numbers going from
> 3.88Gb/s to 14.1Gb/s when switching to MSI interrupts.
> 
> To do this, a couple changes are required outside of the NTB tree:
> 
> 1) The IOMMU must know to accept MSI requests from aliased bused numbers
> seeing NTB hardware typically sends proxied request IDs through
> additional requester IDs. The first patch in this series adds support
> for the Intel IOMMU. A quirk to add these aliases for switchtec hardware
> was already accepted. See commit ad281ecf1c7d ("PCI: Add DMA alias quirk
> for Microsemi Switchtec NTB") for a description of NTB proxy IDs and why
> this is necessary.
> 
> 2) NTB transport (and other clients) may often need more MSI interrupts
> than the NTB hardware actually advertises support for. However, seeing
> these interrupts will not be triggered by the hardware but through an
> NTB memory window, the hardware does not actually need support or need
> to know about them. Therefore we add the concept of Virtual MSI
> interrupts which are allocated just like any other MSI interrupt but
> are not programmed into the hardware's MSI table. This is done in
> Patch 2 and then made use of in Patch 3.
> 
> The remaining patches in this series add a library for dealing with MSI
> interrupts, a test client and finally support in ntb_transport.
> 
> The series is based off of v5.1-rc6 plus the patches in ntb-next.
> A git repo is available here:
> 
> https://github.com/sbates130272/linux-p2pmem/ ntb_transport_msi_v4
> 
> Thanks,
> 
> Logan
> 
> --
> 
> Logan Gunthorpe (10):
>   PCI/MSI: Support allocating virtual MSI interrupts
>   PCI/switchtec: Add module parameter to request more interrupts
>   NTB: Introduce helper functions to calculate logical port number
>   NTB: Introduce functions to calculate multi-port resource index
>   NTB: Rename ntb.c to support multiple source files in the module
>   NTB: Introduce MSI library
>   NTB: Introduce NTB MSI Test Client
>   NTB: Add ntb_msi_test support to ntb_test
>   NTB: Add MSI interrupt support to ntb_transport
>   NTB: Describe the ntb_msi_test client in the documentation.
> 
>  Documentation/ntb.txt                   |  27 ++
>  drivers/ntb/Kconfig                     |  11 +
>  drivers/ntb/Makefile                    |   3 +
>  drivers/ntb/{ntb.c => core.c}           |   0
>  drivers/ntb/msi.c                       | 415 +++++++++++++++++++++++
>  drivers/ntb/ntb_transport.c             | 169 ++++++++-
>  drivers/ntb/test/Kconfig                |   9 +
>  drivers/ntb/test/Makefile               |   1 +
>  drivers/ntb/test/ntb_msi_test.c         | 433 ++++++++++++++++++++++++
>  drivers/pci/msi.c                       |  54 ++-
>  drivers/pci/switch/switchtec.c          |  12 +-
>  include/linux/msi.h                     |   8 +
>  include/linux/ntb.h                     | 196 ++++++++++-
>  include/linux/pci.h                     |   9 +
>  tools/testing/selftests/ntb/ntb_test.sh |  54 ++-
>  15 files changed, 1386 insertions(+), 15 deletions(-)
>  rename drivers/ntb/{ntb.c => core.c} (100%)
>  create mode 100644 drivers/ntb/msi.c
>  create mode 100644 drivers/ntb/test/ntb_msi_test.c
> 
> --
> 2.20.1




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux