Seeing the we want to use more interrupts in the NTB MSI code we need to be able allocate more (sometimes virtual) interrupts in the switchtec driver. Therefore add a module parameter to request to allocate additional interrupts. This puts virtually no limit on the number of MSI interrupts available to NTB clients. Signed-off-by: Logan Gunthorpe <logang@xxxxxxxxxxxx> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> --- drivers/pci/switch/switchtec.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index e22766c79fe9..8b1db78197d9 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -30,6 +30,10 @@ module_param(use_dma_mrpc, bool, 0644); MODULE_PARM_DESC(use_dma_mrpc, "Enable the use of the DMA MRPC feature"); +static int nirqs = 32; +module_param(nirqs, int, 0644); +MODULE_PARM_DESC(nirqs, "number of interrupts to allocate (more may be useful for NTB applications)"); + static dev_t switchtec_devt; static DEFINE_IDA(switchtec_minor_ida); @@ -1247,8 +1251,12 @@ static int switchtec_init_isr(struct switchtec_dev *stdev) int dma_mrpc_irq; int rc; - nvecs = pci_alloc_irq_vectors(stdev->pdev, 1, 4, - PCI_IRQ_MSIX | PCI_IRQ_MSI); + if (nirqs < 4) + nirqs = 4; + + nvecs = pci_alloc_irq_vectors(stdev->pdev, 1, nirqs, + PCI_IRQ_MSIX | PCI_IRQ_MSI | + PCI_IRQ_VIRTUAL); if (nvecs < 0) return nvecs; -- 2.20.1
