From: Petr Machata <petrm@xxxxxxxxxxxx>
This skeleton sets up a topology with three VXLAN endpoints: one
"local", possibly offloaded, and two "remote", formed using veth pairs
and likely purely software bridges. The "local" endpoint is connected to
host systems by a VLAN-unaware bridge.
Since VXLAN tunnels must be unique per namespace, each of the "remote"
endpoints is in its own namespace. H3 forms the bridge between the three
domains.
Signed-off-by: Petr Machata <petrm@xxxxxxxxxxxx>
Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxxxx>
---
.../net/forwarding/vxlan_bridge_1d.sh | 296 ++++++++++++++++++
1 file changed, 296 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
new file mode 100755
index 000000000000..af88e1c146a7
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
@@ -0,0 +1,296 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+ +----------------------+
+# | H1 (vrf) | | H2 (vrf) |
+# | + $h1 | | + $h2 |
+# | | 192.0.2.1/28 | | | 192.0.2.2/28 |
+# +----|---------------+ +--|-------------------+
+# | |
+# +----|--------------------------------------------------|-------------------+
+# | SW | | |
+# | +--|--------------------------------------------------|-----------------+ |
+# | | + $swp1 BR1 (802.1d) + $swp2 | |
+# | | | |
+# | | + vx1 (vxlan) | |
+# | | local 192.0.2.17 | |
+# | | remote 192.0.2.34 192.0.2.50 | |
+# | | id 1000 dstport $VXPORT | |
+# | +-----------------------------------------------------------------------+ |
+# | |
+# | 192.0.2.32/28 via 192.0.2.18 |
+# | 192.0.2.48/28 via 192.0.2.18 |
+# | |
+# | + $rp1 |
+# | | 192.0.2.17/28 |
+# +----|----------------------------------------------------------------------+
+# |
+# +----|--------------------------------------------------------+
+# | | VRP2 (vrf) |
+# | + $rp2 |
+# | 192.0.2.18/28 |
+# | | (maybe) HW
+# =============================================================================
+# | | (likely) SW
+# | + v1 (veth) + v3 (veth) |
+# | | 192.0.2.33/28 | 192.0.2.49/28 |
+# +----|---------------------------------------|----------------+
+# | |
+# +----|------------------------------+ +----|------------------------------+
+# | + v2 (veth) NS1 (netns) | | + v4 (veth) NS2 (netns) |
+# | 192.0.2.34/28 | | 192.0.2.50/28 |
+# | | | |
+# | 192.0.2.16/28 via 192.0.2.33 | | 192.0.2.16/28 via 192.0.2.49 |
+# | 192.0.2.50/32 via 192.0.2.33 | | 192.0.2.34/32 via 192.0.2.49 |
+# | | | |
+# | +-------------------------------+ | | +-------------------------------+ |
+# | | BR2 (802.1d) | | | | BR2 (802.1d) | |
+# | | + vx2 (vxlan) | | | | + vx2 (vxlan) | |
+# | | local 192.0.2.34 | | | | local 192.0.2.50 | |
+# | | remote 192.0.2.17 | | | | remote 192.0.2.17 | |
+# | | remote 192.0.2.50 | | | | remote 192.0.2.34 | |
+# | | id 1000 dstport $VXPORT | | | | id 1000 dstport $VXPORT | |
+# | | | | | | | |
+# | | + w1 (veth) | | | | + w1 (veth) | |
+# | +--|----------------------------+ | | +--|----------------------------+ |
+# | | | | | |
+# | +--|----------------------------+ | | +--|----------------------------+ |
+# | | | VW2 (vrf) | | | | | VW2 (vrf) | |
+# | | + w2 (veth) | | | | + w2 (veth) | |
+# | | 192.0.2.3/28 | | | | 192.0.2.4/28 | |
+# | +-------------------------------+ | | +-------------------------------+ |
+# +-----------------------------------+ +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+ "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/28
+ tc qdisc add dev $h1 clsact
+}
+
+h1_destroy()
+{
+ tc qdisc del dev $h1 clsact
+ simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+ simple_if_init $h2 192.0.2.2/28
+ tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+ tc qdisc del dev $h2 clsact
+ simple_if_fini $h2 192.0.2.2/28
+}
+
+rp1_set_addr()
+{
+ ip address add dev $rp1 192.0.2.17/28
+
+ ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+ ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+ ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+ ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+ ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+ ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0
+ # Make sure the bridge uses the MAC address of the local port and not
+ # that of the VxLAN's device.
+ ip link set dev br1 address $(mac_get $swp1)
+ ip link set dev br1 up
+
+ ip link set dev $rp1 up
+ rp1_set_addr
+
+ ip link add name vx1 type vxlan id 1000 \
+ local 192.0.2.17 dstport "$VXPORT" \
+ nolearning noudpcsum tos inherit ttl 100
+ ip link set dev vx1 up
+
+ ip link set dev vx1 master br1
+ ip link set dev $swp1 master br1
+ ip link set dev $swp1 up
+
+ ip link set dev $swp2 master br1
+ ip link set dev $swp2 up
+
+ bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+ bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+ rp1_unset_addr
+ ip link set dev $rp1 down
+
+ bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+ bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+
+ ip link set dev vx1 nomaster
+ ip link set dev vx1 down
+ ip link del dev vx1
+
+ ip link set dev $swp2 down
+ ip link set dev $swp2 nomaster
+
+ ip link set dev $swp1 down
+ ip link set dev $swp1 nomaster
+
+ ip link set dev br1 down
+ ip link del dev br1
+}
+
+vrp2_create()
+{
+ simple_if_init $rp2 192.0.2.18/28
+ __simple_if_init v1 v$rp2 192.0.2.33/28
+ __simple_if_init v3 v$rp2 192.0.2.49/28
+ tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+ tc qdisc del dev v1 clsact
+ __simple_if_fini v3 192.0.2.49/28
+ __simple_if_fini v1 192.0.2.33/28
+ simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+ local in_if=$1; shift
+ local in_addr=$1; shift
+ local other_in_addr=$1; shift
+ local nh_addr=$1; shift
+ local host_addr=$1; shift
+
+ ip link set dev $in_if up
+ ip address add dev $in_if $in_addr/28
+ tc qdisc add dev $in_if clsact
+
+ ip link add name br2 type bridge vlan_filtering 0
+ ip link set dev br2 up
+
+ ip link add name w1 type veth peer name w2
+
+ ip link set dev w1 master br2
+ ip link set dev w1 up
+
+ ip link add name vx2 type vxlan id 1000 local $in_addr dstport "$VXPORT"
+ ip link set dev vx2 up
+ bridge fdb append dev vx2 00:00:00:00:00:00 dst 192.0.2.17 self
+ bridge fdb append dev vx2 00:00:00:00:00:00 dst $other_in_addr self
+
+ ip link set dev vx2 master br2
+ tc qdisc add dev vx2 clsact
+
+ simple_if_init w2 $host_addr/28
+
+ ip route add 192.0.2.16/28 nexthop via $nh_addr
+ ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+ ip netns add ns1
+ ip link set dev v2 netns ns1
+ in_ns ns1 \
+ ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 192.0.2.3
+}
+
+ns1_destroy()
+{
+ ip netns exec ns1 ip link set dev v2 netns 1
+ ip netns del ns1
+}
+
+ns2_create()
+{
+ ip netns add ns2
+ ip link set dev v4 netns ns2
+ in_ns ns2 \
+ ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 192.0.2.4
+}
+
+ns2_destroy()
+{
+ ip netns exec ns2 ip link set dev v4 netns 1
+ ip netns del ns2
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp2=${NETIFS[p3]}
+ h2=${NETIFS[p4]}
+
+ rp1=${NETIFS[p5]}
+ rp2=${NETIFS[p6]}
+
+ vrf_prepare
+ forwarding_enable
+
+ h1_create
+ h2_create
+ switch_create
+
+ ip link add name v1 type veth peer name v2
+ ip link add name v3 type veth peer name v4
+ vrp2_create
+ ns1_create
+ ns2_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ ns2_destroy
+ ns1_destroy
+ vrp2_destroy
+ ip link del dev v3
+ ip link del dev v1
+
+ switch_destroy
+ h2_destroy
+ h1_destroy
+
+ forwarding_restore
+ vrf_cleanup
+}
+
+test_all()
+{
+ echo "Running tests with UDP port $VXPORT"
+ tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
--
2.19.1
