On Thu, Nov 09, 2017 at 04:47:15PM -0200, Breno Leitao wrote:
> Hi Ram,
>
> On Mon, Nov 06, 2017 at 12:57:36AM -0800, Ram Pai wrote:
> > @@ -206,12 +209,14 @@ void signal_handler(int signum, siginfo_t *si, void *vucontext)
> >
> > trapno = uctxt->uc_mcontext.gregs[REG_TRAPNO];
> > ip = uctxt->uc_mcontext.gregs[REG_IP_IDX];
> > - fpregset = uctxt->uc_mcontext.fpregs;
> > - fpregs = (void *)fpregset;
>
> Since you removed all references for fpregset now, you probably want to
> remove the declaration of the variable above.
fpregs is still needed.
>
> > @@ -219,20 +224,21 @@ void signal_handler(int signum, siginfo_t *si, void *vucontext)
> > * state. We just assume that it is here.
> > */
> > fpregs += 0x70;
> > -#endif
> > - pkey_reg_offset = pkey_reg_xstate_offset();
>
> With this code, you removed all the reference for variable
> pkey_reg_offset, thus, its declaration could be removed also.
yes. will fix it.
>
> > - *(u64 *)pkey_reg_ptr = 0x00000000;
> > + dprintf1("si_pkey from siginfo: %lx\n", si_pkey);
> > +#if defined(__i386__) || defined(__x86_64__) /* arch */
> > + dprintf1("signal pkey_reg from xsave: %016lx\n", *pkey_reg_ptr);
> > + *(u64 *)pkey_reg_ptr &= reset_bits(si_pkey, PKEY_DISABLE_ACCESS);
> > +#elif __powerpc64__
>
> Since the variable pkey_reg_ptr is only used for Intel code (inside
> #ifdefs), you probably want to #ifdef the variable declaration also,
> avoid triggering "unused variable" warning on non-Intel machines.
yes. Actually it will trigger the warning on intel machines. Fixed it.
Thanks Breno!
RP
--
To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
