Fix typos: - syncronized -> synchronized - interfacs -> interface - otherwhise -> otherwise - ony -> only - busses -> buses - maxinum -> maximum Via codespell. Reported-by: Simon Horman <horms@xxxxxxxxxx> Signed-off-by: Andrew Kreimer <algonell@xxxxxxxxx> --- v1: - Fix typos in printk messages. - https://lore.kernel.org/netdev/20241102134856.11322-1-algonell@xxxxxxxxx/ v2: - Address all non-false-positive suggestions, including comments. - The syncronized ==> synchronized suggestions for struct hfc_multi were skipped. drivers/isdn/hardware/mISDN/hfcmulti.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index e5a483fd9ad8..45ff0e198f8f 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -25,8 +25,8 @@ * Bit 8 = 0x00100 = uLaw (instead of aLaw) * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware * Bit 10 = spare - * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto) - * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto) + * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto) + * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto) * Bit 13 = spare * Bit 14 = 0x04000 = Use external ram (128K) * Bit 15 = 0x08000 = Use external ram (512K) @@ -41,7 +41,7 @@ * port: (optional or required for all ports on all installed cards) * HFC-4S/HFC-8S only bits: * Bit 0 = 0x001 = Use master clock for this S/T interface - * (ony once per chip). + * (only once per chip). * Bit 1 = 0x002 = transmitter line setup (non capacitive mode) * Don't use this unless you know what you are doing! * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing) @@ -82,7 +82,7 @@ * By default (0), the PCM bus id is 100 for the card that is PCM master. * If multiple cards are PCM master (because they are not interconnected), * each card with PCM master will have increasing PCM id. - * All PCM busses with the same ID are expected to be connected and have + * All PCM buses with the same ID are expected to be connected and have * common time slots slots. * Only one chip of the PCM bus must be master, the others slave. * -1 means no support of PCM bus not even. @@ -930,7 +930,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) if (newmaster) { hc = newmaster; if (debug & DEBUG_HFCMULTI_PLXSD) - printk(KERN_DEBUG "id=%d (0x%p) = syncronized with " + printk(KERN_DEBUG "id=%d (0x%p) = synchronized with " "interface.\n", hc->id, hc); /* Enable new sync master */ plx_acc_32 = hc->plx_membase + PLX_GPIOC; @@ -949,7 +949,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) hc = pcmmaster; if (debug & DEBUG_HFCMULTI_PLXSD) printk(KERN_DEBUG - "id=%d (0x%p) = PCM master syncronized " + "id=%d (0x%p) = PCM master synchronized " "with QUARTZ\n", hc->id, hc); if (hc->ctype == HFC_TYPE_E1) { /* Use the crystal clock for the PCM @@ -2001,7 +2001,7 @@ hfcmulti_tx(struct hfc_multi *hc, int ch) if (Zspace <= 0) Zspace += hc->Zlen; Zspace -= 4; /* keep not too full, so pointers will not overrun */ - /* fill transparent data only to maxinum transparent load (minus 4) */ + /* fill transparent data only to maximum transparent load (minus 4) */ if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) Zspace = Zspace - hc->Zlen + hc->max_trans; if (Zspace <= 0) /* no space of 4 bytes */ @@ -4672,7 +4672,7 @@ init_e1_port_hw(struct hfc_multi *hc, struct hm_map *m) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: PORT set optical " - "interfacs: card(%d) " + "interface: card(%d) " "port(%d)\n", __func__, HFC_cnt + 1, 1); Interdiff against v1: diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index f3af73ea34ae..45ff0e198f8f 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -25,8 +25,8 @@ * Bit 8 = 0x00100 = uLaw (instead of aLaw) * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware * Bit 10 = spare - * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto) - * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto) + * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto) + * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto) * Bit 13 = spare * Bit 14 = 0x04000 = Use external ram (128K) * Bit 15 = 0x08000 = Use external ram (512K) @@ -41,7 +41,7 @@ * port: (optional or required for all ports on all installed cards) * HFC-4S/HFC-8S only bits: * Bit 0 = 0x001 = Use master clock for this S/T interface - * (ony once per chip). + * (only once per chip). * Bit 1 = 0x002 = transmitter line setup (non capacitive mode) * Don't use this unless you know what you are doing! * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing) @@ -82,7 +82,7 @@ * By default (0), the PCM bus id is 100 for the card that is PCM master. * If multiple cards are PCM master (because they are not interconnected), * each card with PCM master will have increasing PCM id. - * All PCM busses with the same ID are expected to be connected and have + * All PCM buses with the same ID are expected to be connected and have * common time slots slots. * Only one chip of the PCM bus must be master, the others slave. * -1 means no support of PCM bus not even. @@ -2001,7 +2001,7 @@ hfcmulti_tx(struct hfc_multi *hc, int ch) if (Zspace <= 0) Zspace += hc->Zlen; Zspace -= 4; /* keep not too full, so pointers will not overrun */ - /* fill transparent data only to maxinum transparent load (minus 4) */ + /* fill transparent data only to maximum transparent load (minus 4) */ if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) Zspace = Zspace - hc->Zlen + hc->max_trans; if (Zspace <= 0) /* no space of 4 bytes */ Range-diff against v1: 1: e27df5ca2655 ! 1: 69784b0d548a mISDN: Fix typos @@ Commit message mISDN: Fix typos Fix typos: - - syncronized -> synchronized. - - interfacs -> interface. + - syncronized -> synchronized + - interfacs -> interface + - otherwhise -> otherwise + - ony -> only + - busses -> buses + - maxinum -> maximum + Via codespell. + + Reported-by: Simon Horman <horms@xxxxxxxxxx> Signed-off-by: Andrew Kreimer <algonell@xxxxxxxxx> ## drivers/isdn/hardware/mISDN/hfcmulti.c ## +@@ + * Bit 8 = 0x00100 = uLaw (instead of aLaw) + * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware + * Bit 10 = spare +- * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto) +- * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto) ++ * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwise auto) ++ * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwise auto) + * Bit 13 = spare + * Bit 14 = 0x04000 = Use external ram (128K) + * Bit 15 = 0x08000 = Use external ram (512K) +@@ + * port: (optional or required for all ports on all installed cards) + * HFC-4S/HFC-8S only bits: + * Bit 0 = 0x001 = Use master clock for this S/T interface +- * (ony once per chip). ++ * (only once per chip). + * Bit 1 = 0x002 = transmitter line setup (non capacitive mode) + * Don't use this unless you know what you are doing! + * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing) +@@ + * By default (0), the PCM bus id is 100 for the card that is PCM master. + * If multiple cards are PCM master (because they are not interconnected), + * each card with PCM master will have increasing PCM id. +- * All PCM busses with the same ID are expected to be connected and have ++ * All PCM buses with the same ID are expected to be connected and have + * common time slots slots. + * Only one chip of the PCM bus must be master, the others slave. + * -1 means no support of PCM bus not even. @@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) if (newmaster) { hc = newmaster; @@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_resync(struct hfc_multi *locked "with QUARTZ\n", hc->id, hc); if (hc->ctype == HFC_TYPE_E1) { /* Use the crystal clock for the PCM +@@ drivers/isdn/hardware/mISDN/hfcmulti.c: hfcmulti_tx(struct hfc_multi *hc, int ch) + if (Zspace <= 0) + Zspace += hc->Zlen; + Zspace -= 4; /* keep not too full, so pointers will not overrun */ +- /* fill transparent data only to maxinum transparent load (minus 4) */ ++ /* fill transparent data only to maximum transparent load (minus 4) */ + if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) + Zspace = Zspace - hc->Zlen + hc->max_trans; + if (Zspace <= 0) /* no space of 4 bytes */ @@ drivers/isdn/hardware/mISDN/hfcmulti.c: init_e1_port_hw(struct hfc_multi *hc, struct hm_map *m) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG -- 2.47.0.229.g8f8d6eee53