If i2c_smbus_write_byte_data() fails in al3010_init(),
al3010_set_pwr(false) is not called.
In order to avoid such a situation, move the devm_add_action_or_reset()
witch calls al3010_set_pwr(false) right after a successful
al3010_set_pwr(true).
Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
Compile tested only.
This patch is speculative, review with care
---
drivers/iio/light/al3010.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c
index 53569587ccb7..7cbb8b203300 100644
--- a/drivers/iio/light/al3010.c
+++ b/drivers/iio/light/al3010.c
@@ -87,7 +87,12 @@ static int al3010_init(struct al3010_data *data)
int ret;
ret = al3010_set_pwr(data->client, true);
+ if (ret < 0)
+ return ret;
+ ret = devm_add_action_or_reset(&data->client->dev,
+ al3010_set_pwr_off,
+ data);
if (ret < 0)
return ret;
@@ -190,12 +195,6 @@ static int al3010_probe(struct i2c_client *client)
return ret;
}
- ret = devm_add_action_or_reset(&client->dev,
- al3010_set_pwr_off,
- data);
- if (ret < 0)
- return ret;
-
return devm_iio_device_register(&client->dev, indio_dev);
}
--
2.46.0
